lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 18 Jun 2014 17:07:35 +0200
From:	Gabriel Fernandez <gabriel.fernandez@...aro.org>
To:	Lee Jones <lee.jones@...aro.org>
Cc:	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	linux-pwm@...r.kernel.org,
	"kernel@...inux.com" <kernel@...inux.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@...il.com>,
	Patrice Chotard <patrice.chotard@...com>, ajitpal.singh@...com,
	thierry.reding@...il.com, Maxime Coquelin <maxime.coquelin@...com>
Subject: Re: [PATCH 1/7] ARM: stih407: Add DT nodes for for PWM

Hi Lee,
minor remark below..

On 18 June 2014 16:52, Lee Jones <lee.jones@...aro.org> wrote:
> Supply top level nodes for the STiH407 based development boards.
> The Pinctrl configuration has already been applied, so the only
> missing piece of the DT puzzle is for a board's DTB to enable
> the nodes.
>
> Signed-off-by: Lee Jones <lee.jones@...aro.org>
> ---
>  arch/arm/boot/dts/stih407.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
> index 4f9024f..6b43ba2 100644
> --- a/arch/arm/boot/dts/stih407.dtsi
> +++ b/arch/arm/boot/dts/stih407.dtsi
> @@ -259,5 +259,32 @@
>
>                         status = "disabled";
>                 };
> +
> +               /* COMMS PWM Module */
> +               pwm0: pwm@...0000 {
> +                       compatible      = "st,sti-pwm";
> +                       status          = "disabled";
> +                       #pwm-cells      = <2>;
> +                       reg             = <0x9810000 0x68>;
> +                       pinctrl-names   = "default";
> +                        pinctrl-0      = <&pinctrl_pwm0_chan0_default>;
del space

> +                       clock-names     = "pwm";
> +                       clocks          = <&clk_sysin>;
> +               };
> +
> +               /* SBC PWM Module */
> +               pwm1: pwm@...0000 {
> +                       compatible      = "st,sti-pwm";
> +                       status          = "disabled";
> +                       #pwm-cells      = <2>;
> +                       reg             = <0x9510000 0x68>;
> +                       pinctrl-names   = "default";
> +                       pinctrl-0       = <&pinctrl_pwm1_chan0_default
> +                                       &pinctrl_pwm1_chan1_default
> +                                       &pinctrl_pwm1_chan2_default
> +                                       &pinctrl_pwm1_chan3_default>;
> +                       clock-names     = "pwm";
> +                       clocks          = <&clk_sysin>;
> +               };
>         };
>  };
> --
> 1.8.3.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ