Message-id: <1403105372-30403-2-git-send-email-s.nawrocki@samsung.com>
Date:	Wed, 18 Jun 2014 17:29:32 +0200
From:	Sylwester Nawrocki <s.nawrocki@...sung.com>
To:	mturquette@...aro.org, devicetree@...r.kernel.org
Cc:	wsa@...-dreams.de, broonie@...nel.org,
	linux-arm-kernel@...ts.infradead.org, pawel.moll@....com,
	mark.rutland@....com, galak@...eaurora.org,
	gregkh@...uxfoundation.org, kyungmin.park@...sung.com,
	m.szyprowski@...sung.com, t.figa@...sung.com,
	linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
	linux-spi@...r.kernel.org,
	Sylwester Nawrocki <s.nawrocki@...sung.com>
Subject: [PATCH/RFC V8 1/1] clk: Support for clock parents and rates assigned
 from device tree

This patch adds helper functions to configure clock parents and rates
as specified through 'assigned-clock-parents', 'assigned-clock-rates'
DT properties for a clock provider or clock consumer device.
The helpers are now being called by the bus code for the platform, I2C
and SPI busses, before the driver probing and also in the clock core
after registration of a clock provider.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
---
Changes since v6:
 - use a set of separate DT properties to specify the default parent
   clocks and rates;
 - the clock defaults setting extended to the I2C and SPI busses.

Changes since v5:
 - updated the DT binding description (dropped 'assigned-clocks' node);
 - fixed detecting of null phandles (ENOENT error handling);
 - modified of_clk_init() to account for that the clocks property may now
   contain a clock specifier with a phandle that points to our node;

Changes since v4:
 - added note explaining how to skip setting parent and rate
   of a clock,
 - moved of_clk_dev_init() calls to the platform bus,
 - added missing call to of_node_put(),
 - dropped debug traces.

Changes since v3:
 - added detailed description of the assigned-clocks subnode,
 - added missing 'static inline' to the function stub definition,
 - clk-conf.c is now excluded when CONFIG_OF is not set,
 - s/of_clk_device_setup/of_clk_device_init.

Changes since v2:
 - edited in clock-bindings.txt, added note about 'assigned-clocks'
   subnode which may be used to specify "global" clocks configuration
   at a clock provider node,
 - moved of_clk_device_setup() function declaration from clk-provider.h
   to clk-conf.h so required function stubs are available when
   CONFIG_COMMON_CLK is not enabled,

Changes since v1:
 - the helper function to parse and set assigned clock parents and
   rates made public so it is available to clock providers to call
   directly;
 - dropped the platform bus notification and call of_clk_device_setup()
   is is now called from the driver core, rather than from the
   notification callback;
 - s/of_clk_get_list_entry/of_clk_get_by_property.
---
 .../devicetree/bindings/clock/clock-bindings.txt   |   36 +++++
 drivers/base/platform.c                            |    5 +
 drivers/clk/Makefile                               |    3 +
 drivers/clk/clk-conf.c                             |  143 ++++++++++++++++++++
 drivers/clk/clk.c                                  |   12 +-
 drivers/i2c/i2c-core.c                             |    5 +
 drivers/spi/spi.c                                  |    5 +
 include/linux/clk/clk-conf.h                       |   20 +++
 8 files changed, 227 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/clk-conf.c
 create mode 100644 include/linux/clk/clk-conf.h

diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index f1578781..06fc6d5 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -131,3 +131,39 @@ clock signal, and a UART.
   ("pll" and "pll-switched").
 * The UART has its baud clock connected the external oscillator and its
   register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms may require initial configuration of default parent clocks
+and clock frequencies. Such a configuration can be specified in a device tree
+node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
+properties. The assigned-clock-parents property should contain a list of parent
+clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
+property the list of assigned clock frequency values - corresponding to clocks
+listed in the assigned-clocks property.
+
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+    uart@...0 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        ...
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+
+        assigned-clocks = <&clkcon 0>, <&pll 2>;
+        assigned-clock-parents = <&pll 2>;
+        assigned-clock-rates = <0>, <460800>;
+    };
+
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
+the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that consumes
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices can
+be similarly specified in the clock provider node.
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 5b47210..f622733 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -23,6 +23,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/idr.h>
 #include <linux/acpi.h>
+#include <linux/clk/clk-conf.h>

 #include "base.h"
 #include "power/power.h"
@@ -486,6 +487,10 @@ static int platform_drv_probe(struct device *_dev)
 	struct platform_device *dev = to_platform_device(_dev);
 	int ret;

+	ret = of_clk_set_defaults(_dev->of_node, false);
+	if (ret < 0)
+		return ret;
+
 	acpi_dev_pm_attach(_dev, true);

 	ret = drv->probe(dev);
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b25a1fe..7fe358c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
+ifeq ($(CONFIG_OF), y)
+obj-$(CONFIG_COMMON_CLK)	+= clk-conf.o
+endif

 # hardware specific clock types
 # please keep this section sorted lexicographically by file/directory path name
diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
new file mode 100644
index 0000000..1f73019
--- /dev/null
+++ b/drivers/clk/clk-conf.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/printk.h>
+#include "clk.h"
+
+static int __set_clk_parents(struct device_node *node, bool clk_supplier)
+{
+	struct of_phandle_args clkspec;
+	int index, rc, num_parents;
+	struct clk *clk, *pclk;
+
+	num_parents = of_count_phandle_with_args(node, "assigned-clock-parents",
+						 "#clock-cells");
+	if (num_parents == -EINVAL)
+		pr_err("clk: invalid value of clock-parents property at %s\n",
+		       node->full_name);
+
+	for (index = 0; index < num_parents; index++) {
+		rc = of_parse_phandle_with_args(node, "assigned-clock-parents",
+					"#clock-cells",	index, &clkspec);
+		if (rc < 0) {
+			/* skip empty (null) phandles */
+			if (rc == -ENOENT)
+				continue;
+			else
+				return rc;
+		}
+		if (clkspec.np == node && !clk_supplier)
+			return 0;
+		pclk = of_clk_get_by_clkspec(&clkspec);
+		if (IS_ERR(pclk)) {
+			pr_warn("clk: couldn't get parent clock %d for %s\n",
+				index, node->full_name);
+			return PTR_ERR(pclk);
+		}
+
+		rc = of_parse_phandle_with_args(node, "assigned-clocks",
+					"#clock-cells", index, &clkspec);
+		if (rc < 0)
+			goto err;
+		if (clkspec.np == node && !clk_supplier) {
+			rc = 0;
+			goto err;
+		}
+		clk = of_clk_get_by_clkspec(&clkspec);
+		if (IS_ERR(pclk)) {
+			pr_warn("clk: couldn't get parent clock %d for %s\n",
+				index, node->full_name);
+			rc = PTR_ERR(pclk);
+			goto err;
+		}
+
+		rc = clk_set_parent(clk, pclk);
+		if (rc < 0)
+			pr_err("clk: failed to reparent %s to %s: %d\n",
+			       __clk_get_name(clk), __clk_get_name(pclk), rc);
+		clk_put(clk);
+		clk_put(pclk);
+	}
+	return 0;
+err:
+	clk_put(pclk);
+	return rc;
+}
+
+static int __set_clk_rates(struct device_node *node, bool clk_supplier)
+{
+	struct of_phandle_args clkspec;
+	struct property	*prop;
+	const __be32 *cur;
+	int rc, index = 0;
+	struct clk *clk;
+	u32 rate;
+
+	of_property_for_each_u32(node, "assigned-clock-rates", prop, cur, rate) {
+		if (rate) {
+			rc = of_parse_phandle_with_args(node, "assigned-clocks",
+					"#clock-cells",	index, &clkspec);
+			if (rc < 0) {
+				/* skip empty (null) phandles */
+				if (rc == -ENOENT)
+					continue;
+				else
+					return rc;
+			}
+			if (clkspec.np == node && !clk_supplier)
+				return 0;
+
+			clk = of_clk_get_by_clkspec(&clkspec);
+			if (IS_ERR(clk)) {
+				pr_warn("clk: couldn't get clock %d for %s\n",
+					index, node->full_name);
+				return PTR_ERR(clk);
+			}
+
+			rc = clk_set_rate(clk, rate);
+			if (rc < 0)
+				pr_err("clk: couldn't set %s clock rate: %d\n",
+				       __clk_get_name(clk), rc);
+			clk_put(clk);
+		}
+		index++;
+	}
+	return 0;
+}
+
+/**
+ * of_clk_set_defaults() - parse and set assigned clocks configuration
+ * @node: device node to apply clock settings for
+ * @clk_supplier: true if clocks supplied by @node should also be considered
+ *
+ * This function parses 'assigned-{clocks/clock-parents/clock-rates}' properties
+ * and sets any specified clock parents and rates. The @clk_supplier argument
+ * should be set to true if @node may be also a clock supplier of any clock
+ * listed in its 'assigned-clocks' or 'assigned-clock-parents' properties.
+ * If @clk_supplier is false the function exits returnning 0 as soon as it
+ * determines the @node is also a supplier of any of the clocks.
+ */
+int of_clk_set_defaults(struct device_node *node, bool clk_supplier)
+{
+	int rc;
+
+	if (!node)
+		return 0;
+
+	rc = __set_clk_parents(node, clk_supplier);
+	if (rc < 0)
+		return rc;
+
+	return __set_clk_rates(node, clk_supplier);
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 8b73ede..a77af45 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -10,6 +10,7 @@
  */

 #include <linux/clk-private.h>
+#include <linux/clk/clk-conf.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
@@ -2414,6 +2415,7 @@ int of_clk_add_provider(struct device_node *np,
 			void *data)
 {
 	struct of_clk_provider *cp;
+	int ret;

 	cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL);
 	if (!cp)
@@ -2428,7 +2430,11 @@ int of_clk_add_provider(struct device_node *np,
 	mutex_unlock(&of_clk_mutex);
 	pr_debug("Added clock from %s\n", np->full_name);

-	return 0;
+	ret = of_clk_set_defaults(np, true);
+	if (ret < 0)
+		of_clk_del_provider(np);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(of_clk_add_provider);

@@ -2605,7 +2611,10 @@ void __init of_clk_init(const struct of_device_id *matches)
 		list_for_each_entry_safe(clk_provider, next,
 					&clk_provider_list, node) {
 			if (force || parent_ready(clk_provider->np)) {
+
 				clk_provider->clk_init_cb(clk_provider->np);
+				of_clk_set_defaults(clk_provider->np, true);
+
 				list_del(&clk_provider->node);
 				kfree(clk_provider);
 				is_init_done = true;
@@ -2620,7 +2629,6 @@ void __init of_clk_init(const struct of_device_id *matches)
 		 */
 		if (!is_init_done)
 			force = true;
-
 	}
 }
 #endif
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7c7f4b8..66aa83b 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -42,6 +42,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/clk/clk-conf.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
@@ -274,6 +275,10 @@ static int i2c_device_probe(struct device *dev)
 					client->flags & I2C_CLIENT_WAKE);
 	dev_dbg(dev, "probe\n");

+	status = of_clk_set_defaults(dev->of_node, false);
+	if (status < 0)
+		return status;
+
 	acpi_dev_pm_attach(&client->dev, true);
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
 	if (status)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 939edf4..8374620 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -29,6 +29,7 @@
 #include <linux/mutex.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/clk/clk-conf.h>
 #include <linux/slab.h>
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
@@ -259,6 +260,10 @@ static int spi_drv_probe(struct device *dev)
 	const struct spi_driver		*sdrv = to_spi_driver(dev->driver);
 	int ret;

+	ret = of_clk_set_defaults(dev->of_node, false);
+	if (ret)
+		return ret;
+
 	acpi_dev_pm_attach(dev, true);
 	ret = sdrv->probe(to_spi_device(dev));
 	if (ret)
diff --git a/include/linux/clk/clk-conf.h b/include/linux/clk/clk-conf.h
new file mode 100644
index 0000000..f3050e1
--- /dev/null
+++ b/include/linux/clk/clk-conf.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct device_node;
+
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+int of_clk_set_defaults(struct device_node *node, bool clk_supplier);
+#else
+static inline int of_clk_set_defaults(struct device_node *node,
+				      bool clk_supplier)
+{
+	return 0;
+}
+#endif
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists