linux-kernel - Re: [STLinux Kernel] [PATCH 4/7] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140619090546.GB2131@griffinp-ThinkPad-X1-Carbon-2nd>
Date:	Thu, 19 Jun 2014 10:05:46 +0100
From:	Peter Griffin <peter.griffin@...aro.org>
To:	Lee Jones <lee.jones@...aro.org>
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-pwm@...r.kernel.org, kernel@...inux.com,
	devicetree@...r.kernel.org, srinivas.kandagatla@...il.com,
	thierry.reding@...il.com
Subject: Re: [STLinux Kernel] [PATCH 4/7] ARM: stih416-b2020e: Enable PWM on
 the B2020 Rev-E

Hi Lee,

> All the infrastructure is now in place for ST's PWM controller.  This
> patch takes the final step and enables the IP on the 2020 Rev-E
> development platform.

Why are you only enabling this for rev-E board?

If you make the stih415 DT PWM nodes part of this series as well, then 
assuming there is no good reason to the contary, the PWM could 
be enabled for both stih415/6 in the common stih41x-b2020 DTS file which
is also included by rev-E (assuming that PWM wiring is not some rev-E specific
thing).

Also Ajit Signed-off-by needs adding to this series.

After that:
Acked-by: Peter Griffin <peter.griffin@...aro.org>

regards,

Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/