[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <53A2DB81.5070105@ti.com>
Date: Thu, 19 Jun 2014 18:15:53 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Tero Kristo <t-kristo@...com>, <devicetree@...r.kernel.org>,
<linux-doc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <arnd@...db.de>, <tony@...mide.com>, <jg1.han@...sung.com>,
Keerthy <j-keerthy@...com>, Rajendra Nayak <rnayak@...com>,
Paul Walmsley <paul@...an.com>
Subject: Re: [PATCH v2 06/18] ARM: dts: DRA7: Add divider table to optfclk_pciephy_div
clock
Hi Tero,
On Thursday 19 June 2014 04:40 PM, Tero Kristo wrote:
> On 05/29/2014 09:38 AM, Kishon Vijay Abraham I wrote:
>> From: Keerthy <j-keerthy@...com>
>>
>> Add divider table to optfclk_pciephy_div clock. The Documentation
>> for divider clock can be found at ../clock/ti/divider.txt
>
> This patch requires a better changelog. Why is the change done, any TRM refs etc.?
The 8th bit of CM_CLKMODE_APLL_PCIE can be programmed to either 0x0 or 0x1
based on if the divider value is 0x2 or 0x1.
Figure 26-21. PCIe PHY Clock Generator Overview in vE of DRA7xx ES1.0 shows the
block diagram of Clock Generator Subsystem of PCIe PHY module. We have to do a
bypass (divided by 1) in order to get the correct PCIE_PHY_DIV_GCLK
frequency.
Thanks
Kishon
>
> -Tero
>
>>
>> Cc: Rajendra Nayak <rnayak@...com>
>> Cc: Tero Kristo <t-kristo@...com>
>> Cc: Paul Walmsley <paul@...an.com>
>> Signed-off-by: Keerthy <j-keerthy@...com>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
>> ---
>> arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> index c767687..55e95c5 100644
>> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
>> @@ -1170,6 +1170,7 @@
>> clocks = <&apll_pcie_ck>;
>> #clock-cells = <0>;
>> reg = <0x021c>;
>> + ti,dividers = <2>, <1>;
>> ti,bit-shift = <8>;
>> ti,max-div = <2>;
>> };
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists