| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1403523146.18772.10.camel@dhcp-9-2-203-236.watson.ibm.com>
Date: Mon, 23 Jun 2014 07:32:26 -0400
From: Mimi Zohar <zohar@...ux.vnet.ibm.com>
To: Dmitry Kasatkin <d.kasatkin@...sung.com>
Cc: linux-ima-devel@...ts.sourceforge.net,
linux-security-module@...r.kernel.org,
linux-crypto@...r.kernel.org, linux-kernel@...r.kernel.org,
dmitry.kasatkin@...il.com
Subject: Re: [PATCH v1 1/3] ima: use ahash API for file hash calculation
On Thu, 2014-06-19 at 18:20 +0300, Dmitry Kasatkin wrote:
> Async hash API allows to use HW acceleration for hash calculation.
> It may give significant performance gain or/and reduce power consumption,
> which might be very beneficial for battery powered devices.
>
> This patch introduces hash calculation using ahash API.
>
> ahash peformance depends on data size and particular HW. Under certain
> limit, depending on the system, shash performance may be better.
>
> This patch also introduces 'ima_ahash_size' kernel parameter which can
> be used to defines minimal data size to use with ahash. When this
> parameter is not set or file size is smaller than defined by this
> parameter, shash will be used. Thus, by defult, original shash
> implementation is used.
>
> Signed-off-by: Dmitry Kasatkin <d.kasatkin@...sung.com>
Thanks, Dmitry. What type of values are you using for ima_ahash_size?
Have you specified ima_ahash_size, when booting with an initramfs?
ahash should probably only be used after pivoting root.
thanks,
Mimi
> ---
> Documentation/kernel-parameters.txt | 3 +
> security/integrity/ima/ima_crypto.c | 182 +++++++++++++++++++++++++++++++++++-
> 2 files changed, 181 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index a0c155c..f8efb01 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -1286,6 +1286,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
> ihash_entries= [KNL]
> Set number of hash buckets for inode cache.
>
> + ima_ahash_size=size [IMA]
> + Set the minimal file size when use ahash API.
> +
> ima_appraise= [IMA] appraise integrity measurements
> Format: { "off" | "enforce" | "fix" }
> default: "enforce"
> diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
> index ccd0ac8..b7a8650 100644
> --- a/security/integrity/ima/ima_crypto.c
> +++ b/security/integrity/ima/ima_crypto.c
> @@ -25,7 +25,25 @@
> #include <crypto/hash_info.h>
> #include "ima.h"
>
> +
> +struct ahash_completion {
> + struct completion completion;
> + int err;
> +};
> +
> static struct crypto_shash *ima_shash_tfm;
> +static struct crypto_ahash *ima_ahash_tfm;
> +
> +/* data size for ahash use */
> +static loff_t ima_ahash_size;
> +
> +static int __init ima_ahash_setup(char *str)
> +{
> + int rc = kstrtoll(str, 10, &ima_ahash_size);
> + pr_info("ima_ahash_size = %lld\n", ima_ahash_size);
> + return !rc;
> +}
> +__setup("ima_ahash_size=", ima_ahash_setup);
>
> /**
> * ima_kernel_read - read file content
> @@ -68,6 +86,14 @@ int ima_init_crypto(void)
> hash_algo_name[ima_hash_algo], rc);
> return rc;
> }
> + ima_ahash_tfm = crypto_alloc_ahash(hash_algo_name[ima_hash_algo], 0, 0);
> + if (IS_ERR(ima_ahash_tfm)) {
> + rc = PTR_ERR(ima_ahash_tfm);
> + crypto_free_shash(ima_shash_tfm);
> + pr_err("Can not allocate %s (reason: %ld)\n",
> + hash_algo_name[ima_hash_algo], rc);
> + return rc;
> + }
> return 0;
> }
>
> @@ -93,9 +119,143 @@ static void ima_free_tfm(struct crypto_shash *tfm)
> crypto_free_shash(tfm);
> }
>
> -/*
> - * Calculate the MD5/SHA1 file digest
> - */
> +static struct crypto_ahash *ima_alloc_atfm(enum hash_algo algo)
> +{
> + struct crypto_ahash *tfm = ima_ahash_tfm;
> + int rc;
> +
> + if (algo != ima_hash_algo && algo < HASH_ALGO__LAST) {
> + tfm = crypto_alloc_ahash(hash_algo_name[algo], 0, 0);
> + if (IS_ERR(tfm)) {
> + rc = PTR_ERR(tfm);
> + pr_err("Can not allocate %s (reason: %d)\n",
> + hash_algo_name[algo], rc);
> + }
> + }
> + return tfm;
> +}
> +
> +static void ima_free_atfm(struct crypto_ahash *tfm)
> +{
> + if (tfm != ima_ahash_tfm)
> + crypto_free_ahash(tfm);
> +}
> +
> +static void ahash_complete(struct crypto_async_request *req, int err)
> +{
> + struct ahash_completion *res = req->data;
> +
> + if (err == -EINPROGRESS)
> + return;
> + res->err = err;
> + complete(&res->completion);
> +}
> +
> +static int ahash_wait(int err, struct ahash_completion *res)
> +{
> + switch (err) {
> + case 0:
> + break;
> + case -EINPROGRESS:
> + case -EBUSY:
> + wait_for_completion(&res->completion);
> + reinit_completion(&res->completion);
> + err = res->err;
> + /* fall through */
> + default:
> + pr_crit("ahash calculation failed: err: %d\n", err);
> + }
> +
> + return err;
> +}
> +
> +static int ima_calc_file_hash_atfm(struct file *file,
> + struct ima_digest_data *hash,
> + struct crypto_ahash *tfm)
> +{
> + loff_t i_size, offset;
> + char *rbuf;
> + int rc, read = 0, rbuf_len;
> + struct ahash_request *req;
> + struct scatterlist sg[1];
> + struct ahash_completion res;
> +
> + hash->length = crypto_ahash_digestsize(tfm);
> +
> + req = ahash_request_alloc(ima_ahash_tfm, GFP_KERNEL);
> + if (!req)
> + return -ENOMEM;
> +
> + init_completion(&res.completion);
> + ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG |
> + CRYPTO_TFM_REQ_MAY_SLEEP,
> + ahash_complete, &res);
> +
> + rc = ahash_wait(crypto_ahash_init(req), &res);
> + if (rc)
> + goto out1;
> +
> + i_size = i_size_read(file_inode(file));
> +
> + if (i_size == 0)
> + goto out2;
> +
> + rbuf = kzalloc(PAGE_SIZE, GFP_KERNEL);
> + if (!rbuf) {
> + rc = -ENOMEM;
> + goto out1;
> + }
> +
> + if (!(file->f_mode & FMODE_READ)) {
> + file->f_mode |= FMODE_READ;
> + read = 1;
> + }
> +
> + for (offset = 0; offset < i_size; offset += rbuf_len) {
> + rbuf_len = ima_kernel_read(file, offset, rbuf, PAGE_SIZE);
> + if (rbuf_len < 0) {
> + rc = rbuf_len;
> + break;
> + }
> + if (rbuf_len == 0)
> + break;
> +
> + sg_init_one(&sg[0], rbuf, rbuf_len);
> + ahash_request_set_crypt(req, sg, NULL, rbuf_len);
> +
> + rc = ahash_wait(crypto_ahash_update(req), &res);
> + if (rc)
> + break;
> + }
> + if (read)
> + file->f_mode &= ~FMODE_READ;
> + kfree(rbuf);
> +out2:
> + if (!rc) {
> + ahash_request_set_crypt(req, NULL, hash->digest, 0);
> + rc = ahash_wait(crypto_ahash_final(req), &res);
> + }
> +out1:
> + ahash_request_free(req);
> + return rc;
> +}
> +
> +static int ima_calc_file_ahash(struct file *file, struct ima_digest_data *hash)
> +{
> + struct crypto_ahash *tfm;
> + int rc;
> +
> + tfm = ima_alloc_atfm(hash->algo);
> + if (IS_ERR(tfm))
> + return PTR_ERR(tfm);
> +
> + rc = ima_calc_file_hash_atfm(file, hash, tfm);
> +
> + ima_free_atfm(tfm);
> +
> + return rc;
> +}
> +
> static int ima_calc_file_hash_tfm(struct file *file,
> struct ima_digest_data *hash,
> struct crypto_shash *tfm)
> @@ -156,7 +316,7 @@ out:
> return rc;
> }
>
> -int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
> +static int ima_calc_file_shash(struct file *file, struct ima_digest_data *hash)
> {
> struct crypto_shash *tfm;
> int rc;
> @@ -172,6 +332,20 @@ int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
> return rc;
> }
>
> +int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash)
> +{
> + loff_t i_size = i_size_read(file_inode(file));
> +
> + /* shash is more efficient small data
> + * ahash performance depends on data size and particular HW
> + * ima_ahash_size allows to specify the best value for the system
> + */
> + if (ima_ahash_size && i_size >= ima_ahash_size)
> + return ima_calc_file_ahash(file, hash);
> + else
> + return ima_calc_file_shash(file, hash);
> +}
> +
> /*
> * Calculate the hash of template data
> */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists