lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <53A9713A.3020202@cogentembedded.com>
Date:	Tue, 24 Jun 2014 16:38:18 +0400
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	"Chen, Alvin" <alvin.chen@...el.com>,
	Alan Stern <stern@...land.harvard.edu>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	Boon Leong Ong <boon.leong.ong@...el.com>
Subject: Re: [PATCH] USB: ehci-pci: USB host controller support for Intel
 Quark X1000

Hello.

On 06/24/2014 07:51 PM, Chen, Alvin wrote:

> From: Bryan O'Donoghue <bryan.odonoghue@...el.com>

> This patch is to enable USB host controller for Intel Quark X1000. Add pci quirks
> to adjust the packet buffer in/out threshold value, and ensure EHCI packet buffer
> i/o threshold value is reconfigured to half.

> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...el.com>
> Signed-off-by: Alvin (Weike) Chen <alvin.chen@...el.com>
> ---
>   drivers/usb/host/ehci-pci.c   |    4 ++++
>   drivers/usb/host/pci-quirks.c |   42 +++++++++++++++++++++++++++++++++++++++++
>   drivers/usb/host/pci-quirks.h |    2 ++
>   3 files changed, 48 insertions(+)

> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
> index 3e86bf4..33cfa23 100644
> --- a/drivers/usb/host/ehci-pci.c
> +++ b/drivers/usb/host/ehci-pci.c
> @@ -50,6 +50,10 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
>   	if (!retval)
>   		ehci_dbg(ehci, "MWI active\n");
>
> +	/* Reset the threshold limit */
> +	if(unlikely(usb_is_intel_qrk(pdev)))

    Please run your patch thru scripts/checkpatch.pl -- space needed after *if*.

> +		usb_set_qrk_bulk_thresh(pdev);
> +
>   	return 0;
>   }
>
> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
> index 00661d3..1ea8803 100644
> --- a/drivers/usb/host/pci-quirks.c
> +++ b/drivers/usb/host/pci-quirks.c
> @@ -823,6 +823,48 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
>   	return -ETIMEDOUT;
>   }
>
> +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939
> +bool usb_is_intel_qrk(struct pci_dev *pdev)
> +{
> +	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
> +		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
> +
> +}
> +EXPORT_SYMBOL_GPL(usb_is_intel_qrk);

    Why not use DECLARE_PCI_FIXUP_FINAL() instead?

> +
> +#define EHCI_INSNREG01		0x84
> +#define EHCI_INSNREG01_THRESH	0x007F007F	/* Threshold value */
> +void usb_set_qrk_bulk_thresh(struct pci_dev *pdev)
> +{
> +	void __iomem *base, *op_reg_base;
> +	u8 cap_length;
> +	u32 val;
> +
> +	if (!mmio_resource_enabled(pdev, 0))
> +		return;
> +
> +	base = pci_ioremap_bar(pdev, 0);
> +	if (base == NULL)
> +		return;
> +
> +	cap_length = readb(base);
> +	op_reg_base = base + cap_length;
> +
> +	val = readl(op_reg_base + EHCI_INSNREG01);
> +	dev_printk(KERN_INFO, &pdev->dev, "INSNREG01 is 0x%08x\n", val);
> +
> +	val = EHCI_INSNREG01_THRESH;
> +
> +	writel(val, op_reg_base + EHCI_INSNREG01);
> +
> +	val = readl(op_reg_base + EHCI_INSNREG01);
> +	dev_printk(KERN_INFO, &pdev->dev, "INSNREG01 is 0x%08x\n", val);

    I doubt these dev_printk() calls are really useful. But if the are, it's 
worth merging them into one call.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ