linux-kernel - [PATCH 3.14 21/68] sh_eth: use RNC mode for packet reception

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20140624154724.864312901@linuxfoundation.org>
Date:	Tue, 24 Jun 2014 11:50:40 -0400
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	Ben Dooks <ben.dooks@...ethink.co.uk>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
	Simon Horman <horms+renesas@...ge.net.au>,
	"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 3.14 21/68] sh_eth: use RNC mode for packet reception

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Dooks <ben.dooks@...ethink.co.uk>

[ Upstream commit 530aa2d0d9d55ab2775d47621ddf4b5b15bc1110 ]

The current behaviour of the sh_eth driver is not to use the RNC bit
for the receive ring. This means that every packet recieved is not only
generating an IRQ but it also stops the receive ring DMA as well until
the driver re-enables it after unloading the packet.

This means that a number of the following errors are generated due to
the receive packet FIFO overflowing due to nowhere to put packets:

	net eth0: Receive FIFO Overflow

Since feedback from Yoshihiro Shimoda shows that every supported LSI
for this driver should have the bit enabled it seems the best way is
to remove the RMCR default value from the per-system data and just
write it when initialising the RMCR value. This is discussed in
the message (http://www.spinics.net/lists/netdev/msg284912.html).

I have tested the RMCR_RNC configuration with NFS root filesystem and
the driver has not failed yet.  There are further test reports from
Sergei Shtylov and others for both the R8A7790 and R8A7791.

There is also feedback fron Cao Minh Hiep[1] which reports the
same issue in (http://comments.gmane.org/gmane.linux.network/316285)
showing this fixes issues with losing UDP datagrams under iperf.

Tested-by: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Signed-off-by: Ben Dooks <ben.dooks@...ethink.co.uk>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Acked-by: Simon Horman <horms+renesas@...ge.net.au>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/ethernet/renesas/sh_eth.c |   11 ++---------
 drivers/net/ethernet/renesas/sh_eth.h |    2 --
 2 files changed, 2 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -539,7 +539,6 @@ static struct sh_eth_cpu_data sh7757_dat
 	.register_type	= SH_ETH_REG_FAST_SH4,
 
 	.eesipr_value	= DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
-	.rmcr_value	= RMCR_RNC,
 
 	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
 	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
@@ -617,7 +616,6 @@ static struct sh_eth_cpu_data sh7757_dat
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000072f,
-	.rmcr_value	= RMCR_RNC,
 
 	.irq_flags	= IRQF_SHARED,
 	.apr		= 1,
@@ -745,7 +743,6 @@ static struct sh_eth_cpu_data r8a7740_da
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000070f,
-	.rmcr_value	= RMCR_RNC,
 
 	.apr		= 1,
 	.mpr		= 1,
@@ -777,7 +774,6 @@ static struct sh_eth_cpu_data r7s72100_d
 			  EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
 			  EESR_TDE | EESR_ECI,
 	.fdr_value	= 0x0000070f,
-	.rmcr_value	= RMCR_RNC,
 
 	.no_psr		= 1,
 	.apr		= 1,
@@ -826,9 +822,6 @@ static void sh_eth_set_default_cpu_data(
 	if (!cd->fdr_value)
 		cd->fdr_value = DEFAULT_FDR_INIT;
 
-	if (!cd->rmcr_value)
-		cd->rmcr_value = DEFAULT_RMCR_VALUE;
-
 	if (!cd->tx_check)
 		cd->tx_check = DEFAULT_TX_CHECK;
 
@@ -1281,8 +1274,8 @@ static int sh_eth_dev_init(struct net_de
 	sh_eth_write(ndev, mdp->cd->fdr_value, FDR);
 	sh_eth_write(ndev, 0, TFTR);
 
-	/* Frame recv control */
-	sh_eth_write(ndev, mdp->cd->rmcr_value, RMCR);
+	/* Frame recv control (enable multiple-packets per rx irq) */
+	sh_eth_write(ndev, RMCR_RNC, RMCR);
 
 	sh_eth_write(ndev, DESC_I_RINT8 | DESC_I_RINT5 | DESC_I_TINT2, TRSCER);
 
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -320,7 +320,6 @@ enum TD_STS_BIT {
 enum RMCR_BIT {
 	RMCR_RNC = 0x00000001,
 };
-#define DEFAULT_RMCR_VALUE	0x00000000
 
 /* ECMR */
 enum FELIC_MODE_BIT {
@@ -467,7 +466,6 @@ struct sh_eth_cpu_data {
 	unsigned long fdr_value;
 	unsigned long fcftr_value;
 	unsigned long rpadir_value;
-	unsigned long rmcr_value;
 
 	/* interrupt checking mask */
 	unsigned long tx_check;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/