[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1403649878-28242-2-git-send-email-boris.brezillon@free-electrons.com>
Date: Wed, 25 Jun 2014 00:44:37 +0200
From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Andrew Victor <linux@...im.org.za>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Boris BREZILLON <boris.brezillon@...e-electrons.com>
Subject: [PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards
Add ethernet-phy node to specify phy address (on the MDIO bus) and phy
interrupt (connected to pin PB25).
Define board specific delays to apply to RGMII signals.
Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
---
arch/arm/boot/dts/sama5d3xcm.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index b0b1331..2185ad8 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -34,6 +34,22 @@
macb0: ethernet@...28000 {
phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ reg = <1>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <12000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <12000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
};
pmc: pmc@...ffc00 {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists