linux-kernel - Re: [PATCH 2/4] usb: host: xhci-plat: Add support to get PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAFp+6iH_rxNpHZyFH6k5Got6YJ_RQMsm=95=pkRPitsxopsosA@mail.gmail.com>
Date:	Wed, 25 Jun 2014 11:19:55 +0530
From:	Vivek Gautam <gautam.vivek@...sung.com>
To:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Cc:	Julius Werner <jwerner@...omium.org>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"linux-samsung-soc@...r.kernel.org" 
	<linux-samsung-soc@...r.kernel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	kishon <kishon@...com>, Mathias Nyman <mathias.nyman@...el.com>,
	LKML <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	Kukjin Kim <kgene.kim@...sung.com>
Subject: Re: [PATCH 2/4] usb: host: xhci-plat: Add support to get PHYs

HI Sergei,


On Wed, Jun 25, 2014 at 4:04 AM, Sergei Shtylyov
<sergei.shtylyov@...entembedded.com> wrote:
> Hello.
>
>
> On 06/10/2014 12:22 AM, Julius Werner wrote:
>
>>> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
>>> index 9ffecd5..453d89e 100644
>>> --- a/drivers/usb/host/xhci.h
>>> +++ b/drivers/usb/host/xhci.h
>>> @@ -1582,6 +1582,9 @@ struct xhci_hcd {
>>>          u32                     port_status_u0;
>>>   /* Compliance Mode Timer Triggered every 2 seconds */
>>>   #define COMP_MODE_RCVRY_MSECS 2000
>>> +       /* phys for the controller */
>>> +       struct phy              *phy2_gen;
>>> +       struct phy              *phy3_gen;
>>>   };
>
>
>> I don't think adding new variables here and restricting most of this
>> logic to xhci-plat.c (in the next patch) is the best way to do it.
>
>
>    Indeed.
>
>
>> There's no conceptual reason why other host controllers (e.g. xhci-pci
>> or even EHCI) could not have a similar need to tune their PHY after
>> reset. PHYs are universal to all host controllers.
>
>
>> There is already a 'phy' member in struct usb_hcd which I think is
>> mostly unused right now. I think it would be much less
>> confusing/redundant to reuse that member for this purpose (you could
>> still set it up from xhci_plat_probe(), and then call it from
>> hcd_bus_resume() or something like that).
>
>
>    That member has type 'struct usb_phy *' while here we have 'struct phy *'
> -- feel the difference.
>    I have already tried adding 'struct phy *gen_phy' to 'struct usb_hcd',
> however Greg wasn't eager to pick that up so far. Here's the last posting of
> my patch:
>
> http://marc.info/?l=linux-usb&m=140145917506582

Thanks for pointing to the patch, i have also been tracking this patch.
I will try to rework using this patch and post the relevant patches.



-- 
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/