| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1403713327-27976-3-git-send-email-klebers@linux.vnet.ibm.com>
Date: Wed, 25 Jun 2014 13:22:05 -0300
From: Kleber Sacilotto de Souza <klebers@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
Cc: haver@...ux.vnet.ibm.com, gregkh@...uxfoundation.org,
Kleber Sacilotto de Souza <klebers@...ux.vnet.ibm.com>
Subject: [PATCH 2/4] GenWQE: Add support for EEH error recovery
This patch implements the callbacks and functions necessary to have EEH
recovery support.
It adds a config option to enable or disable explicit calls to trigger
platform specific mechanisms on error recovery paths. This option is
enabled by default only on PPC64 systems and can be overritten via
debugfs. If this option is enabled, on the error recovery path the
driver will call pci_channel_offline() to check for error condition and
issue non-raw MMIO reads to trigger early EEH detection in case of
hardware failures. This is necessary since the driver MMIO helper
funtions use raw accessors.
Signed-off-by: Kleber Sacilotto de Souza <klebers@...ux.vnet.ibm.com>
---
drivers/misc/genwqe/Kconfig | 6 +++
drivers/misc/genwqe/card_base.c | 79 ++++++++++++++++++++++++++++++------
drivers/misc/genwqe/card_base.h | 2 +
drivers/misc/genwqe/card_ddcb.c | 24 +++++++++--
drivers/misc/genwqe/card_debugfs.c | 7 +++
drivers/misc/genwqe/card_dev.c | 5 ++
drivers/misc/genwqe/card_utils.c | 10 +++++
7 files changed, 115 insertions(+), 18 deletions(-)
diff --git a/drivers/misc/genwqe/Kconfig b/drivers/misc/genwqe/Kconfig
index 6069d8c..4c0a033 100644
--- a/drivers/misc/genwqe/Kconfig
+++ b/drivers/misc/genwqe/Kconfig
@@ -11,3 +11,9 @@ menuconfig GENWQE
Enables PCIe card driver for IBM GenWQE accelerators.
The user-space interface is described in
include/linux/genwqe/genwqe_card.h.
+
+config GENWQE_PLATFORM_ERROR_RECOVERY
+ int "Use platform recovery procedures (0=off, 1=on)"
+ depends on GENWQE
+ default 1 if PPC64
+ default 0
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index e6cc3e1..87ebaba 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -140,6 +140,12 @@ static struct genwqe_dev *genwqe_dev_alloc(void)
cd->class_genwqe = class_genwqe;
cd->debugfs_genwqe = debugfs_genwqe;
+ /*
+ * This comes from kernel config option and can be overritten via
+ * debugfs.
+ */
+ cd->use_platform_recovery = CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY;
+
init_waitqueue_head(&cd->queue_waitq);
spin_lock_init(&cd->file_lock);
@@ -943,6 +949,19 @@ static int genwqe_health_thread(void *data)
return 0;
fatal_error:
+ if (cd->use_platform_recovery) {
+ /*
+ * Since we use raw accessors, EEH errors won't be detected
+ * by the platform until we do a non-raw MMIO or config space
+ * read
+ */
+ readq(cd->mmio + IO_SLC_CFGREG_GFIR);
+
+ /* We do nothing if the card is going over PCI recovery */
+ if (pci_channel_offline(pci_dev))
+ return -EIO;
+ }
+
dev_err(&pci_dev->dev,
"[%s] card unusable. Please trigger unbind!\n", __func__);
@@ -1048,6 +1067,9 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
pci_set_master(pci_dev);
pci_enable_pcie_error_reporting(pci_dev);
+ /* EEH recovery requires PCIe fundamental reset */
+ pci_dev->needs_freset = 1;
+
/* request complete BAR-0 space (length = 0) */
cd->mmio_len = pci_resource_len(pci_dev, 0);
cd->mmio = pci_iomap(pci_dev, 0, 0);
@@ -1186,23 +1208,40 @@ static pci_ers_result_t genwqe_err_error_detected(struct pci_dev *pci_dev,
dev_err(&pci_dev->dev, "[%s] state=%d\n", __func__, state);
- if (pci_dev == NULL)
- return PCI_ERS_RESULT_NEED_RESET;
-
cd = dev_get_drvdata(&pci_dev->dev);
if (cd == NULL)
- return PCI_ERS_RESULT_NEED_RESET;
+ return PCI_ERS_RESULT_DISCONNECT;
- switch (state) {
- case pci_channel_io_normal:
- return PCI_ERS_RESULT_CAN_RECOVER;
- case pci_channel_io_frozen:
- return PCI_ERS_RESULT_NEED_RESET;
- case pci_channel_io_perm_failure:
+ /* Stop the card */
+ genwqe_health_check_stop(cd);
+ genwqe_stop(cd);
+
+ /*
+ * On permanent failure, the PCI code will call device remove
+ * after the return of this function.
+ * genwqe_stop() can be called twice.
+ */
+ if (state == pci_channel_io_perm_failure) {
return PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ genwqe_pci_remove(cd);
+ return PCI_ERS_RESULT_NEED_RESET;
}
+}
+
+static pci_ers_result_t genwqe_err_slot_reset(struct pci_dev *pci_dev)
+{
+ int rc;
+ struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);
- return PCI_ERS_RESULT_NEED_RESET;
+ rc = genwqe_pci_setup(cd);
+ if (!rc) {
+ return PCI_ERS_RESULT_RECOVERED;
+ } else {
+ dev_err(&pci_dev->dev,
+ "err: problems with PCI setup (err=%d)\n", rc);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
}
static pci_ers_result_t genwqe_err_result_none(struct pci_dev *dev)
@@ -1210,8 +1249,22 @@ static pci_ers_result_t genwqe_err_result_none(struct pci_dev *dev)
return PCI_ERS_RESULT_NONE;
}
-static void genwqe_err_resume(struct pci_dev *dev)
+static void genwqe_err_resume(struct pci_dev *pci_dev)
{
+ int rc;
+ struct genwqe_dev *cd = dev_get_drvdata(&pci_dev->dev);
+
+ rc = genwqe_start(cd);
+ if (!rc) {
+ rc = genwqe_health_check_start(cd);
+ if (rc)
+ dev_err(&pci_dev->dev,
+ "err: cannot start health checking! (err=%d)\n",
+ rc);
+ } else {
+ dev_err(&pci_dev->dev,
+ "err: cannot start card services! (err=%d)\n", rc);
+ }
}
static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs)
@@ -1234,7 +1287,7 @@ static struct pci_error_handlers genwqe_err_handler = {
.error_detected = genwqe_err_error_detected,
.mmio_enabled = genwqe_err_result_none,
.link_reset = genwqe_err_result_none,
- .slot_reset = genwqe_err_result_none,
+ .slot_reset = genwqe_err_slot_reset,
.resume = genwqe_err_resume,
};
diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h
index 0e608a2..67abd8c 100644
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -291,6 +291,8 @@ struct genwqe_dev {
struct task_struct *health_thread;
wait_queue_head_t health_waitq;
+ int use_platform_recovery; /* use platform recovery mechanisms */
+
/* char device */
dev_t devnum_genwqe; /* major/minor num card */
struct class *class_genwqe; /* reference to class object */
diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c
index c8046db..f0de615 100644
--- a/drivers/misc/genwqe/card_ddcb.c
+++ b/drivers/misc/genwqe/card_ddcb.c
@@ -1118,7 +1118,21 @@ static irqreturn_t genwqe_pf_isr(int irq, void *dev_id)
* safer, but slower for the good-case ... See above.
*/
gfir = __genwqe_readq(cd, IO_SLC_CFGREG_GFIR);
- if ((gfir & GFIR_ERR_TRIGGER) != 0x0) {
+ if (((gfir & GFIR_ERR_TRIGGER) != 0x0) &&
+ !pci_channel_offline(pci_dev)) {
+
+ if (cd->use_platform_recovery) {
+ /*
+ * Since we use raw accessors, EEH errors won't be
+ * detected by the platform until we do a non-raw
+ * MMIO or config space read
+ */
+ readq(cd->mmio + IO_SLC_CFGREG_GFIR);
+
+ /* Don't do anything if the PCI channel is frozen */
+ if (pci_channel_offline(pci_dev))
+ goto exit;
+ }
wake_up_interruptible(&cd->health_waitq);
@@ -1126,12 +1140,12 @@ static irqreturn_t genwqe_pf_isr(int irq, void *dev_id)
* By default GFIRs causes recovery actions. This
* count is just for debug when recovery is masked.
*/
- printk_ratelimited(KERN_ERR
- "%s %s: [%s] GFIR=%016llx\n",
- GENWQE_DEVNAME, dev_name(&pci_dev->dev),
- __func__, gfir);
+ dev_err_ratelimited(&pci_dev->dev,
+ "[%s] GFIR=%016llx\n",
+ __func__, gfir);
}
+ exit:
return IRQ_HANDLED;
}
diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c
index 0a33ade..c9b4d6d 100644
--- a/drivers/misc/genwqe/card_debugfs.c
+++ b/drivers/misc/genwqe/card_debugfs.c
@@ -485,6 +485,13 @@ int genwqe_init_debugfs(struct genwqe_dev *cd)
goto err1;
}
+ file = debugfs_create_u32("use_platform_recovery", 0666, root,
+ &cd->use_platform_recovery);
+ if (!file) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
cd->debugfs_root = root;
return 0;
err1:
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
index 1d2f163..aae4255 100644
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -1048,10 +1048,15 @@ static long genwqe_ioctl(struct file *filp, unsigned int cmd,
int rc = 0;
struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data;
struct genwqe_dev *cd = cfile->cd;
+ struct pci_dev *pci_dev = cd->pci_dev;
struct genwqe_reg_io __user *io;
u64 val;
u32 reg_offs;
+ /* Return -EIO if card hit EEH */
+ if (pci_channel_offline(pci_dev))
+ return -EIO;
+
if (_IOC_TYPE(cmd) != GENWQE_IOC_CODE)
return -EINVAL;
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index 62cc6bb..4a50058 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -53,12 +53,17 @@
*/
int __genwqe_writeq(struct genwqe_dev *cd, u64 byte_offs, u64 val)
{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
return -EIO;
if (cd->mmio == NULL)
return -EIO;
+ if (pci_channel_offline(pci_dev))
+ return -EIO;
+
__raw_writeq((__force u64)cpu_to_be64(val), cd->mmio + byte_offs);
return 0;
}
@@ -99,12 +104,17 @@ u64 __genwqe_readq(struct genwqe_dev *cd, u64 byte_offs)
*/
int __genwqe_writel(struct genwqe_dev *cd, u64 byte_offs, u32 val)
{
+ struct pci_dev *pci_dev = cd->pci_dev;
+
if (cd->err_inject & GENWQE_INJECT_HARDWARE_FAILURE)
return -EIO;
if (cd->mmio == NULL)
return -EIO;
+ if (pci_channel_offline(pci_dev))
+ return -EIO;
+
__raw_writel((__force u32)cpu_to_be32(val), cd->mmio + byte_offs);
return 0;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists