| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fa656d2d-a2a8-4b8d-a29b-e89e4bfced3e@BL2FFO11FD034.protection.gbl>
Date: Fri, 27 Jun 2014 16:53:53 +0530
From: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@...inx.com>
To: <robh+dt@...nel.org>, <Peter.Chen@...escale.com>,
<gregkh@...uxfoundation.org>, <galak@...eaurora.org>,
<rdunlap@...radead.org>, <michal.simek@...inx.com>
CC: <devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <kpc528@...il.com>,
<kalluripunnaiahchoudary@...il.com>,
Punnaiah Choudary Kalluri <punnaia@...inx.com>
Subject: [PATCH v2 2/2] usb: chipidea: Add support for zynq usb host and device controller
Zynq soc uses Chipidea/Synopsys usb IP core(CI13612). This patch adds
necessary glue to allow the chipidea driver to work on zynq soc.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
---
Changes in v2:
- modified the commit message for better readability
- fixed the dev_err message
---
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci_hdrc_zynq.c | 115 +++++++++++++++++++++++++++++++++++
2 files changed, 116 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/chipidea/ci_hdrc_zynq.c
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 2f099c7..b0d6b6f 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -12,6 +12,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o
obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o
+obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zynq.o
# PCI doesn't provide stubs, need to check
ifneq ($(CONFIG_PCI),)
diff --git a/drivers/usb/chipidea/ci_hdrc_zynq.c b/drivers/usb/chipidea/ci_hdrc_zynq.c
new file mode 100644
index 0000000..5ef2717
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_zynq.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+
+#define ZYNQ_USB_DMA_MASK 0xFFFFFFF0
+
+struct ci_hdrc_zynq_data {
+ struct platform_device *ci_pdev;
+ struct clk *clk;
+};
+
+static struct ci_hdrc_platform_data pdata = {
+ .name = "ci_hdrc_zynq",
+ .capoffset = DEF_CAPOFFSET,
+ .flags = CI_HDRC_REQUIRE_TRANSCEIVER
+};
+
+static int ci_hdrc_zynq_probe(struct platform_device *pdev)
+{
+ struct ci_hdrc_zynq_data *data;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "Failed to allocate ci_hdrc_zynq data!\n");
+ return -ENOMEM;
+ }
+
+ data->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->clk)) {
+ dev_err(&pdev->dev,
+ "Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
+ return PTR_ERR(data->clk);
+ }
+
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to prepare or enable clock, err=%d\n", ret);
+ return ret;
+ }
+
+ ret = dma_coerce_mask_and_coherent(&pdev->dev, ZYNQ_USB_DMA_MASK);
+ if (ret)
+ goto err_clk;
+
+ data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
+ pdev->resource, pdev->num_resources,
+ &pdata);
+ if (IS_ERR(data->ci_pdev)) {
+ ret = PTR_ERR(data->ci_pdev);
+ dev_err(&pdev->dev,
+ "Can't register ci_hdrc platform device, err=%d\n",
+ ret);
+ goto err_clk;
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ pm_runtime_no_callbacks(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ return 0;
+
+err_clk:
+ clk_disable_unprepare(data->clk);
+ return ret;
+}
+
+static int ci_hdrc_zynq_remove(struct platform_device *pdev)
+{
+ struct ci_hdrc_zynq_data *data = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+ ci_hdrc_remove_device(data->ci_pdev);
+ clk_disable_unprepare(data->clk);
+
+ return 0;
+}
+
+static const struct of_device_id ci_hdrc_zynq_dt_ids[] = {
+ { .compatible = "xlnx,zynq-usb-2.20a" },
+ {},
+};
+
+static struct platform_driver ci_hdrc_zynq_driver = {
+ .probe = ci_hdrc_zynq_probe,
+ .remove = ci_hdrc_zynq_remove,
+ .driver = {
+ .name = "zynq_usb",
+ .owner = THIS_MODULE,
+ .of_match_table = ci_hdrc_zynq_dt_ids,
+ },
+};
+
+module_platform_driver(ci_hdrc_zynq_driver);
+
+MODULE_ALIAS("platform:zynq_usb");
+MODULE_DESCRIPTION("CI HDRC ZYNQ USB binding");
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_LICENSE("GPL v2");
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists