early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.16.0-rc2-00003-g3b3fb61 (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Sun Jun 29 09:43:54 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa0-06261808/linux-devel:devel-hourly-2014062617:3b3fb61976509ef8f7c0c05adba0b61cea6b05db:bisect-linux0/.vmlinuz-3b3fb61976509ef8f7c0c05adba0b61cea6b05db-20140629095255-19-lkp-wsx01 branch=linux-devel/devel-hourly-2014062617 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x04bc1000, 0x04bc1fff] PGTABLE [ 0.000000] BRK [0x04bc2000, 0x04bc2fff] PGTABLE [ 0.000000] BRK [0x04bc3000, 0x04bc3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff] [ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff] [ 0.000000] [mem 0x10000000-0x139fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x04bc4000, 0x04bc4fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13ce6000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0D00 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FFFC2A 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FFF1C0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FFE040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FFE000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FFF234 00093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FFFB72 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FFFBF2 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13c66001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880013800000 s79488 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1380cd40 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80519 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa0-06261808/linux-devel:devel-hourly-2014062617:3b3fb61976509ef8f7c0c05adba0b61cea6b05db:bisect-linux0/.vmlinuz-3b3fb61976509ef8f7c0c05adba0b61cea6b05db-20140629095255-19-lkp-wsx01 branch=linux-devel/devel-hourly-2014062617 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Memory: 254604K/327280K available (19508K kernel code, 10935K rwdata, 10220K rodata, 1412K init, 19004K bss, 72676K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Linux version 3.16.0-rc2-00003-g3b3fb61 (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP Sun Jun 29 09:43:54 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa0-06261808/linux-devel:devel-hourly-2014062617:3b3fb61976509ef8f7c0c05adba0b61cea6b05db:bisect-linux0/.vmlinuz-3b3fb61976509ef8f7c0c05adba0b61cea6b05db-20140629095255-19-lkp-wsx01 branch=linux-devel/devel-hourly-2014062617 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x04bc1000, 0x04bc1fff] PGTABLE [ 0.000000] BRK [0x04bc2000, 0x04bc2fff] PGTABLE [ 0.000000] BRK [0x04bc3000, 0x04bc3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff] [ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff] [ 0.000000] [mem 0x10000000-0x139fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x04bc4000, 0x04bc4fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x13ce6000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0D00 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FFFC2A 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FFF1C0 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FFE040 001180 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FFE000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FFF234 00093E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FFFB72 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FFFBF2 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13c66001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57d000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57c000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880013800000 s79488 r8192 d22912 u1048576 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1380cd40 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80519 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa0-06261808/linux-devel:devel-hourly-2014062617:3b3fb61976509ef8f7c0c05adba0b61cea6b05db:bisect-linux0/.vmlinuz-3b3fb61976509ef8f7c0c05adba0b61cea6b05db-20140629095255-19-lkp-wsx01 branch=linux-devel/devel-hourly-2014062617 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Memory: 254604K/327280K available (19508K kernel code, 10935K rwdata, 10220K rodata, 1412K init, 19004K bss, 72676K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 8127 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2393.998 MHz processor [ 0.020000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=23939980) [ 0.020000] pid_max: default: 32768 minimum: 301 [ 0.020000] ACPI: Core revision 20140424 [ 0.024677] ACPI: All ACPI Tables successfully acquired [ 0.026206] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.027566] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.030388] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.030388] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.030388] tlb_flushall_shift: 6 [ 0.035536] Freeing SMP alternatives memory: 28K (ffffffff8392a000 - ffffffff83931000) [ 0.040786] Getting VERSION: 1050014 [ 0.041706] Getting VERSION: 1050014 [ 0.042599] Getting ID: 0 [ 0.043381] Getting ID: ff000000 [ 0.044229] Getting LVT0: 8700 [ 0.045061] Getting LVT1: 8400 [ 0.045955] enabled ExtINT on CPU#0 [ 0.048596] ENABLING IO-APIC IRQs [ 0.049769] init IO_APIC IRQs [ 0.050015] apic 0 pin 0 not connected [ 0.050988] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.052828] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.054695] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.056514] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.058663] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.060044] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.062640] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.065125] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.067633] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.070041] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.072728] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.075500] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.080044] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.082828] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.085799] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.088111] apic 0 pin 16 not connected [ 0.089048] apic 0 pin 17 not connected [ 0.090009] apic 0 pin 18 not connected [ 0.090950] apic 0 pin 19 not connected [ 0.091924] apic 0 pin 20 not connected [ 0.093381] apic 0 pin 21 not connected [ 0.094826] apic 0 pin 22 not connected [ 0.096262] apic 0 pin 23 not connected [ 0.097872] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100010] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.103046] Using local APIC timer interrupts. [ 0.103046] calibrating APIC timer ... [ 0.110000] ... lapic delta = 6250102 [ 0.110000] ... PM-Timer delta = 357931 [ 0.110000] ... PM-Timer result ok [ 0.110000] ..... delta 6250102 [ 0.110000] ..... mult: 268439836 [ 0.110000] ..... calibration result: 10000163 [ 0.110000] ..... CPU clock speed is 2393.8053 MHz. [ 0.110000] ..... host bus clock speed is 1000.0163 MHz. [ 0.110168] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.115326] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.117994] x86: Booting SMP configuration: [ 0.119606] .... node #0, CPUs: #1 [ 0.020000] kvm-clock: cpu 1, msr 0:13c66041, secondary cpu clock [ 0.020000] masked ExtINT on CPU#1 [ 0.140162] x86: Booted up 1 node, 2 CPUs [ 0.140131] KVM setup async PF for cpu 1 [ 0.140142] kvm-stealtime: cpu 1, msr 1390cd40 [ 0.143721] ---------------- [ 0.144499] | NMI testsuite: [ 0.145280] -------------------- [ 0.146111] remote IPI: ok | [ 0.151042] local IPI: ok | [ 0.170041] -------------------- [ 0.171361] Good, all 2 testcases passed! | [ 0.172995] --------------------------------- [ 0.174568] smpboot: Total of 2 processors activated (9575.99 BogoMIPS) [ 0.193309] gcov: version magic: 0x3430382a [ 0.196993] xor: measuring software checksum speed [ 0.300019] prefetch64-sse: 8529.200 MB/sec [ 0.400017] generic_sse: 7462.000 MB/sec [ 0.401500] xor: using function: prefetch64-sse (8529.200 MB/sec) [ 0.403343] prandom: seed boundary self test passed [ 0.405230] prandom: 100 self tests passed [ 0.406213] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.407984] NET: Registered protocol family 16 [ 0.411041] cpuidle: using governor menu [ 0.413089] ACPI: bus type PCI registered [ 0.414317] dca service started, version 1.12.1 [ 0.415443] PCI: Using configuration type 1 for base access [ 0.607243] raid6: sse2x1 1281 MB/s [ 0.777248] raid6: sse2x2 1967 MB/s [ 0.947326] raid6: sse2x4 1735 MB/s [ 0.949037] raid6: using algorithm sse2x2 (1967 MB/s) [ 0.950015] raid6: using intx1 recovery algorithm [ 0.952036] ACPI: Added _OSI(Module Device) [ 0.953073] ACPI: Added _OSI(Processor Device) [ 0.954143] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.955230] ACPI: Added _OSI(Processor Aggregator Device) [ 0.972391] ACPI: Interpreter enabled [ 0.973397] ACPI: (supports S0 S5) [ 0.974414] ACPI: Using IOAPIC for interrupt routing [ 0.976407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.997373] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.998730] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments] [ 1.000099] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.002119] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.006326] PCI host bridge to bus 0000:00 [ 1.007803] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.009516] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.010015] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 1.011326] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 1.012642] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 1.014293] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 1.015597] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.017041] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 1.018520] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.021237] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.023437] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.028333] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 1.031100] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.032548] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.033874] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.035727] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.037613] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.040099] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 1.041826] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 1.045058] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.048139] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 1.050676] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 1.059100] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 1.060709] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 1.062991] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 1.065327] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 1.073006] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 1.074932] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 1.076784] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 1.082310] pci_bus 0000:00: on NUMA node 0 [ 1.085025] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.087112] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.089189] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.091309] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.093166] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.095868] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.097641] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.099510] vgaarb: loaded [ 1.100011] vgaarb: bridge control possible 0000:00:02.0 [ 1.101295] SCSI subsystem initialized [ 1.101691] libata version 3.00 loaded. [ 1.101691] ACPI: bus type USB registered [ 1.102390] usbcore: registered new interface driver usbfs [ 1.103652] usbcore: registered new interface driver hub [ 1.110065] usbcore: registered new device driver usb [ 1.110142] pps_core: LinuxPPS API ver. 1 registered [ 1.111407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.118583] PTP clock support registered [ 1.120201] wmi: Mapper loaded [ 1.121328] PCI: Using ACPI for IRQ routing [ 1.122359] PCI: pci_cache_line_size set to 64 bytes [ 1.123621] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.124907] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 1.126855] irda_init() [ 1.127788] NET: Registered protocol family 23 [ 1.130012] Switched to clocksource kvm-clock [ 1.131701] Warning: could not register all branches stats [ 1.132929] Warning: could not register annotated branches stats [ 1.173510] pnp: PnP ACPI init [ 1.174520] ACPI: bus type PNP registered [ 1.175675] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.177714] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.179233] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.181596] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.183626] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.186504] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.188633] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.190585] pnp 00:03: [dma 2] [ 1.192031] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.194328] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.196422] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.198827] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.202081] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.205898] pnp: PnP ACPI: found 6 devices [ 1.207491] ACPI: bus type PNP unregistered [ 1.221176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.222425] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 1.223677] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 1.224928] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 1.226140] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 1.227358] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 1.228788] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 1.230257] NET: Registered protocol family 1 [ 1.231417] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.232726] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.234014] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.235371] pci 0000:00:02.0: Boot video device [ 1.236504] PCI: CLS 0 bytes, default 64 [ 1.238077] Unpacking initramfs... [ 1.387485] Freeing initrd memory: 3112K (ffff880013ce6000 - ffff880013ff0000) [ 1.392351] cryptomgr_test (34) used greatest stack depth: 14888 bytes left [ 1.396538] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable. [ 1.398508] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 1.400553] spin_lock-torture:--- Start of test: nwriters_stress=4 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 1.404961] spin_lock-torture: Creating torture_shuffle task [ 1.406832] spin_lock-torture: Creating torture_stutter task [ 1.406843] spin_lock-torture: torture_shuffle task started [ 1.410379] spin_lock-torture: Creating lock_torture_writer task [ 1.410405] spin_lock-torture: torture_stutter task started [ 1.413847] spin_lock-torture: Creating lock_torture_writer task [ 1.413875] spin_lock-torture: lock_torture_writer task started [ 1.417335] spin_lock-torture: Creating lock_torture_writer task [ 1.417361] spin_lock-torture: lock_torture_writer task started [ 1.420945] spin_lock-torture: Creating lock_torture_writer task [ 1.420962] spin_lock-torture: lock_torture_writer task started [ 1.424431] spin_lock-torture: Creating lock_torture_stats task [ 1.424446] spin_lock-torture: lock_torture_writer task started [ 1.428210] spin_lock-torture: lock_torture_stats task started [ 1.429614] futex hash table entries: 512 (order: 4, 65536 bytes) [ 1.431711] Initialise system trusted keyring [ 2.392036] tsc: Refined TSC clocksource calibration: 2393.992 MHz [ 2.702747] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.723726] VFS: Disk quotas dquot_6.5.2 [ 2.726657] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.731339] SGI XFS with ACLs, security attributes, large block/inode numbers, debug enabled [ 2.744374] gfs2: GFS2 installed [ 2.746294] cryptomgr_test (60) used greatest stack depth: 14768 bytes left [ 2.749980] NET: Registered protocol family 38 [ 2.751894] Key type asymmetric registered [ 2.753627] Asymmetric key parser 'x509' registered [ 2.756019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.759061] io scheduler noop registered [ 2.760775] io scheduler deadline registered (default) [ 2.762728] test_string_helpers: Running tests... [ 2.806392] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 2.808160] crc32: self tests passed, processed 225944 bytes in 27693485 nsec [ 2.829959] crc32c: CRC_LE_BITS = 1 [ 2.831448] crc32c: self tests passed, processed 225944 bytes in 12745522 nsec [ 4.394970] crc32_combine: 8373 self tests passed [ 6.035738] crc32c_combine: 8373 self tests passed [ 6.038720] rbtree testing -> 42940 cycles [ 8.030685] augmented rbtree testing -> 62345 cycles [ 10.902095] ipmi message handler version 39.2 [ 10.903833] IPMI System Interface driver. [ 10.905760] ipmi_si: Unable to find any System Interface(s) [ 10.907854] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 10.911098] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 10.946612] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 10.970917] kworker/u4:0 (87) used greatest stack depth: 14256 bytes left [ 10.971680] lp: driver loaded but no devices found [ 10.971852] Non-volatile memory driver v1.3 [ 10.976445] ppdev: user-space parallel port driver [ 10.978149] smapi::smapi_init, ERROR invalid usSmapiID [ 10.980996] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 10.984026] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 10.986611] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 10.988627] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 10.991608] Hangcheck: Using getrawmonotonic(). [ 10.993391] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 10.995738] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 10.998673] Guest personality initialized and is inactive [ 11.000666] VMCI host device registered (name=vmci, major=10, minor=62) [ 11.002625] Initialized host personality [ 11.004684] usbcore: registered new interface driver viperboard [ 11.006511] Uniform Multi-Platform E-IDE driver [ 11.008772] Loading iSCSI transport class v2.0-870. [ 11.035023] hp_sw: device handler registered [ 11.036562] alua: device handler registered [ 11.039053] Adaptec aacraid driver 1.2-0[30300]-ms [ 11.040953] scsi: Detection failed (no card) [ 11.042754] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 [ 11.044853] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 11.046998] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 11.049789] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 11.051867] iscsi: registered transport (be2iscsi) [ 11.053492] In beiscsi_module_init, tt=ffffffff83043c20 [ 11.055420] esas2r: driver will not be loaded because no ATTO esas2r devices were found [ 11.063174] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 11.074666] mtdoops: mtd device (mtddev=name/number) must be supplied [ 11.078632] libphy: Fixed MDIO Bus: probed [ 11.080896] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014) [ 11.084100] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.60 [ 11.086745] tlan: ThunderLAN driver v1.17 [ 11.088223] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 11.090103] w83977af_init() [ 11.092648] w83977af_open() [ 11.093798] w83977af_probe() [ 11.095079] w83977af_probe(), Wrong chip version [ 11.095978] w83977af_probe() [ 11.097242] w83977af_probe(), Wrong chip version [ 11.098065] usbcore: registered new interface driver mcs7780 [ 11.099921] PPP generic driver version 2.4.2 [ 11.101119] PPP MPPE Compression module registered [ 11.102571] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 11.104772] usbcore: registered new interface driver ipheth [ 11.107506] usbcore: registered new interface driver hwa-rc [ 11.109404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.111502] ehci-pci: EHCI PCI platform driver [ 11.113249] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 11.115450] usbcore: registered new interface driver wusb-cbaf [ 11.117372] usbcore: registered new interface driver cdc_acm [ 11.119176] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.122093] usbcore: registered new interface driver usbtmc [ 11.123920] usbcore: registered new interface driver microtekX6 [ 11.126050] usbcore: registered new interface driver appledisplay [ 11.127991] usbcore: registered new interface driver emi62 - firmware loader [ 11.130217] usbcore: registered new interface driver usblcd [ 11.132060] usbcore: registered new interface driver usbtest [ 11.133910] usbcore: registered new interface driver uss720 [ 11.135653] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 11.137630] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 11.139350] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 11.141411] uss720: If you just want to connect to a printer, use usblp instead [ 11.150798] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 11.155032] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.156662] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.169089] parkbd: no such parport [ 11.170897] usbcore: registered new interface driver appletouch [ 11.173039] usbcore: registered new interface driver bcm5974 [ 11.175945] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 11.187542] mk712: device not present [ 11.189086] usbcore: registered new interface driver usbtouchscreen [ 11.191700] cm109: Keymap for Komunikate KIP1000 phone loaded [ 11.193716] usbcore: registered new interface driver cm109 [ 11.195618] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad [ 11.197685] usbcore: registered new interface driver ims_pcu [ 11.200677] pps pps0: new PPS source ktimer [ 11.202235] pps pps0: ktimer PPS source registered [ 11.203872] pps_ldisc: PPS line discipline registered [ 11.206981] alim7101_wdt: Steve Hill [ 11.208804] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 11.213627] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 11.217254] wafer5823wdt: initialized. timeout=60 sec (nowayout=0) [ 11.219064] sc1200wdt: build 20020303 [ 11.220420] sc1200wdt: io parameter must be specified [ 11.222411] pc87413_wdt: Version 1.1 at io 0x2E [ 11.224175] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 11.226560] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 11.235120] usbcore: registered new interface driver tranzport [ 11.237385] usbcore: registered new interface driver alphatrack [ 11.239949] input: Speakup as /devices/virtual/input/input3 [ 11.242323] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 11.244878] speakup 3.1.6: initialized [ 11.246496] synth name on entry is: (null) [ 11.248250] usbcore: registered new interface driver gdm_wimax [ 11.262909] dgnc: dgnc-1.3-16, Digi International Part Number 40002369_F [ 11.265154] dgnc: For the tools package or updated drivers please visit http://www.digi.com [ 11.268784] FPGA DOWNLOAD ---> [ 11.270212] FPGA image file name: xlinx_fpga_firmware.bit [ 11.272515] GPIO INIT FAIL!! [ 11.274167] dell_wmi_aio: No known WMI GUID found [ 11.275961] Initializing HPQ6001 module [ 11.277829] Mirror/redirect action on [ 11.279342] Simple TC action Loaded [ 11.281072] netem: version 1.3 [ 11.282612] NET: Registered protocol family 17 [ 11.284352] NET: Registered protocol family 5 [ 11.286689] IrCOMM protocol (Dag Brattli) [ 11.292072] 9pnet: Installing 9P2000 support [ 11.293728] Key type dns_resolver registered [ 11.295600] batman_adv: B.A.T.M.A.N. advanced 2014.3.0 (compatibility version 15) loaded [ 11.298386] mpls_gso: MPLS GSO support [ 11.300367] [ 11.300367] printing PIC contents [ 11.302612] ... PIC IMR: ffff [ 11.303957] ... PIC IRR: 1013 [ 11.305249] ... PIC ISR: 0000 [ 11.306561] ... PIC ELCR: 0c00 [ 11.307892] printing local APIC contents on CPU#0/0: [ 11.309609] ... APIC ID: 00000000 (0) [ 11.311103] ... APIC VERSION: 01050014 [ 11.312614] ... APIC TASKPRI: 00000000 (00) [ 11.314351] ... APIC PROCPRI: 00000000 [ 11.315948] ... APIC LDR: 01000000 [ 11.317259] ... APIC DFR: ffffffff [ 11.317878] ... APIC SPIV: 000001ff [ 11.317878] ... APIC ISR field: [ 11.317878] 0000000000000000000000000000000000000000000000000000000000000000 [ 11.317878] ... APIC TMR field: [ 11.317878] 0000000002000000000000000000000000000000000000000000000000000000 [ 11.317878] ... APIC IRR field: [ 11.317878] 0000000000000000000000000000000000000000000000000000000000008000 [ 11.317878] ... APIC ESR: 00000000 [ 11.317878] ... APIC ICR: 000008fd [ 11.317878] ... APIC ICR2: 02000000 [ 11.317878] ... APIC LVTT: 000000ef [ 11.317878] ... APIC LVTPC: 00010000 [ 11.317878] ... APIC LVT0: 00010700 [ 11.317878] ... APIC LVT1: 00000400 [ 11.317878] ... APIC LVTERR: 000000fe [ 11.317878] ... APIC TMICT: 0009808b [ 11.317878] ... APIC TMCCT: 00000000 [ 11.317878] ... APIC TDCR: 00000003 [ 11.317878] [ 11.350929] number of MP IRQ sources: 15. [ 11.352383] number of IO-APIC #0 registers: 24. [ 11.353942] testing the IO APIC....................... [ 11.355747] IO APIC #0...... [ 11.356979] .... register #00: 00000000 [ 11.358368] ....... : physical APIC id: 00 [ 11.359952] ....... : Delivery Type: 0 [ 11.361546] ....... : LTS : 0 [ 11.362976] .... register #01: 00170011 [ 11.364451] ....... : max redirection entries: 17 [ 11.366265] ....... : PRQ implemented: 0 [ 11.367828] ....... : IO APIC version: 11 [ 11.369292] .... register #02: 00000000 [ 11.370857] ....... : arbitration: 00 [ 11.372341] .... IRQ redirection table: [ 11.373779] 1 0 0 0 0 0 0 00 [ 11.375359] 0 0 0 0 0 1 1 31 [ 11.376963] 0 0 0 0 0 1 1 30 [ 11.378597] 0 0 0 0 0 1 1 33 [ 11.380285] 1 0 0 0 0 1 1 34 [ 11.382018] 1 1 0 0 0 1 1 35 [ 11.383617] 0 0 0 0 0 1 1 36 [ 11.385190] 0 0 0 0 0 1 1 37 [ 11.386789] 0 0 0 0 0 1 1 38 [ 11.388373] 0 1 0 0 0 1 1 39 [ 11.390146] 1 1 0 0 0 1 1 3A [ 11.391824] 1 1 0 0 0 1 1 3B [ 11.393421] 0 0 0 0 0 1 1 3C [ 11.395013] 0 0 0 0 0 1 1 3D [ 11.396636] 0 0 0 0 0 1 1 3E [ 11.398221] 0 0 0 0 0 1 1 3F [ 11.399822] 1 0 0 0 0 0 0 00 [ 11.401579] 1 0 0 0 0 0 0 00 [ 11.403032] 1 0 0 0 0 0 0 00 [ 11.404671] 1 0 0 0 0 0 0 00 [ 11.406281] 1 0 0 0 0 0 0 00 [ 11.407868] 1 0 0 0 0 0 0 00 [ 11.409420] 1 0 0 0 0 0 0 00 [ 11.411200] 1 0 0 0 0 0 0 00 [ 11.412798] IRQ to pin mappings: [ 11.414103] IRQ0 -> 0:2 [ 11.415510] IRQ1 -> 0:1 [ 11.416911] IRQ3 -> 0:3 [ 11.418304] IRQ4 -> 0:4 [ 11.419822] IRQ5 -> 0:5 [ 11.421452] IRQ6 -> 0:6 [ 11.422847] IRQ7 -> 0:7 [ 11.424356] IRQ8 -> 0:8 [ 11.425884] IRQ9 -> 0:9 [ 11.427306] IRQ10 -> 0:10 [ 11.428761] IRQ11 -> 0:11 [ 11.430266] IRQ12 -> 0:12 [ 11.431822] IRQ13 -> 0:13 [ 11.433272] IRQ14 -> 0:14 [ 11.434760] IRQ15 -> 0:15 [ 11.436190] .................................... done. [ 11.439073] Loading compiled-in X.509 certificates [ 11.444541] Loaded X.509 cert 'Magrathea: Glacier signing key: 90a762e8db947539e440b925bc25b6bb854446b4' [ 11.463225] Btrfs loaded, integrity-checker=on [ 11.480799] Freeing unused kernel memory: 1412K (ffffffff837c9000 - ffffffff8392a000) [ 11.495009] mount (116) used greatest stack depth: 13720 bytes left [ 11.505157] S00fbsetup (118) used greatest stack depth: 13640 bytes left [ 11.606071] S03udev (125) used greatest stack depth: 13632 bytes left [ 11.637292] gfs2: path_lookup on rootfs returned error -2 [ 11.641397] mount (143) used greatest stack depth: 13392 bytes left [ 12.043811] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 61.420099] spin_lock-torture: Writes: Total: 4 Max/Min: 0/0 Fail: 0 [ 81.194543] Unregister pv shared memory for cpu 1 [ 81.196067] Unregister pv shared memory for cpu 0 [ 81.197674] spin_lock-torture: Unscheduled system shutdown detected [ 81.200104] torture thread torture_shuffle parking due to system shutdown BUG: kernel boot crashed Elapsed time: 90 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-hsxa0-06261808/linux-devel:devel-hourly-2014062617:3b3fb61976509ef8f7c0c05adba0b61cea6b05db:bisect-linux0/.vmlinuz-3b3fb61976509ef8f7c0c05adba0b61cea6b05db-20140629095255-19-lkp-wsx01 branch=linux-devel/devel-hourly-2014062617 BOOT_IMAGE=/kernel/x86_64-randconfig-hsxa0-06261808/3b3fb61976509ef8f7c0c05adba0b61cea6b05db/vmlinuz-3.16.0-rc2-00003-g3b3fb61 drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-lkp-wsx01-130 -serial file:/dev/shm/kboot/serial-yocto-lkp-wsx01-130 -daemonize -display none -monitor null