linux-kernel - [PATCH v2 07/14] AT91: PIT: Use consistent exit path in probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue,  1 Jul 2014 11:33:20 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	linux@...im.org.za, Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:	Boris Brezillon <boris@...e-electrons.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Thomas Petazzoni <thomas@...e-electrons.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH v2 07/14] AT91: PIT: Use consistent exit path in probe

The current probe code is, whenever it fails to retrieve a resource, either
panicing, silently returning, or returning and displaying an error.

Make the code consistent by always panicing whenever it fails to grab any
resource.

Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
 arch/arm/mach-at91/at91sam926x_time.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index f6c44539af6e..641e860e83e7 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -208,7 +208,7 @@ static void __init at91sam926x_pit_common_init(void)
 	/* Set up irq handler */
 	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
 	if (ret)
-		pr_crit("AT91: PIT: Unable to setup IRQ\n");
+		panic("AT91: PIT: Unable to setup IRQ\n");
 
 	/* Set up and register clockevents */
 	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
@@ -222,7 +222,7 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
 
 	pit_base_addr = of_iomap(node, 0);
 	if (!pit_base_addr)
-		return;
+		panic("AT91: PIT: Could not map PIT address\n");
 
 	mck = of_clk_get(node, 0);
 	if (IS_ERR(mck))
@@ -234,18 +234,12 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
 
 	/* Get the interrupts property */
 	irq = irq_of_parse_and_map(node, 0);
-	if (!irq) {
-		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
-		goto clk_err;
-	}
+	if (!irq)
+		panic("AT91: PIT: Unable to get IRQ from DT\n");
 
 	at91sam926x_pit_irq.irq = irq;
 
 	at91sam926x_pit_common_init();
-
-clk_err:
-	clk_put(mck);
-	iounmap(pit_base_addr);
 }
 CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
 		       at91sam926x_pit_dt_init);
@@ -256,7 +250,7 @@ void __init at91sam926x_pit_init(void)
 	if (IS_ERR(mck))
 		panic("AT91: PIT: Unable to get mck clk\n");
 
-	at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
+	at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS;
 
 	at91sam926x_pit_common_init();
 }
-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/