| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAG374jAEBhKsjqhp+csbzPq3nzBXjfp-etZTC+46hN_wBZXSsw@mail.gmail.com>
Date: Tue, 1 Jul 2014 14:11:26 +0200
From: Gabriel Fernandez <gabriel.fernandez@...aro.org>
To: Mark Rutland <mark.rutland@....com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@...com>,
"mturquette@...aro.org" <mturquette@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Pawel Moll <Pawel.Moll@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"kernel@...inux.com" <kernel@...inux.com>,
Lee Jones <lee.jones@...aro.org>
Subject: Re: [PATCH v2 01/14] clk: st: Update ST clock binding documentation
Hi Mark,
yes i agree.
Thanks.
Gabriel
On 30 June 2014 11:23, Mark Rutland <mark.rutland@....com> wrote:
> On Fri, Jun 27, 2014 at 02:24:58PM +0100, Gabriel FERNANDEZ wrote:
>> This patch adds new compatibilities to support STiH407 SoC.
>
> This doesn't seem to match the patch, which seems to relabel nodes,
> rename nodes, change clock-output-names, _and_ adds some new compatible
> strings.
>
> Therefore this commit message is completely inappropriate for the patch.
> It doesn't match the diff and it doesn't tell me why you are making the
> changes below.
>
> NAK until that is fixed.
>
> Mark.
>
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...aro.org>
>> Acked-by: Peter Griffin <peter.griffin@...aro.org>
>> ---
>> .../bindings/clock/st/st,clkgen-divmux.txt | 28 +++++------
>> .../devicetree/bindings/clock/st/st,clkgen-mux.txt | 6 +--
>> .../devicetree/bindings/clock/st/st,clkgen-pll.txt | 17 ++++---
>> .../bindings/clock/st/st,clkgen-prediv.txt | 8 ++--
>> .../devicetree/bindings/clock/st/st,clkgen-vcc.txt | 34 ++++++++------
>> .../devicetree/bindings/clock/st/st,clkgen.txt | 54 +++++++++++++---------
>> .../devicetree/bindings/clock/st/st,quadfs.txt | 15 +++---
>> 7 files changed, 94 insertions(+), 68 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
>> index ae56315..6247652 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
>> @@ -24,26 +24,26 @@ Required properties:
>>
>> Example:
>>
>> - clockgenA@...45000 {
>> + clockgen-a@...45000 {
>> reg = <0xfd345000 0xb50>;
>>
>> - CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
>> + clk_m_a1_div1: clk-m-a1-div1 {
>> #clock-cells = <1>;
>> compatible = "st,clkgena-divmux-c32-odf1",
>> "st,clkgena-divmux";
>>
>> - clocks = <&CLK_M_A1_OSC_PREDIV>,
>> - <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
>> - <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
>> -
>> - clock-output-names = "CLK_M_RX_ICN_TS",
>> - "CLK_M_RX_ICN_VDP_0",
>> - "", /* Unused */
>> - "CLK_M_PRV_T1_BUS",
>> - "CLK_M_ICN_REG_12",
>> - "CLK_M_ICN_REG_10",
>> - "", /* Unused */
>> - "CLK_M_ICN_ST231";
>> + clocks = <&clk_m_a1_osc_prediv>,
>> + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
>> + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
>> +
>> + clock-output-names = "clk-m-rx-icn-ts",
>> + "clk-m-rx-icn-vdp-0",
>> + "", /* unused */
>> + "clk-m-prv-t1-bus",
>> + "clk-m-icn-reg-12",
>> + "clk-m-icn-reg-10",
>> + "", /* unused */
>> + "clk-m-icn-st231";
>> };
>> };
>>
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>> index 943e080..f1fa91c 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
>> @@ -17,7 +17,7 @@ Required properties:
>> "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"
>> "st,stih415-clkgen-a9-mux", "st,clkgen-mux"
>> "st,stih416-clkgen-a9-mux", "st,clkgen-mux"
>> -
>> + "st,stih407-clkgen-a9-mux", "st,clkgen-mux"
>>
>> - #clock-cells : from common clock binding; shall be set to 0.
>>
>> @@ -27,10 +27,10 @@ Required properties:
>>
>> Example:
>>
>> - CLK_M_HVA: CLK_M_HVA {
>> + clk_m_hva: clk-m-hva@...90868 {
>> #clock-cells = <0>;
>> compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
>> reg = <0xfd690868 4>;
>>
>> - clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
>> + clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
>> };
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>> index 81eb385..efb51cf 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
>> @@ -19,11 +19,14 @@ Required properties:
>> "st,stih415-plls-c32-ddr", "st,clkgen-plls-c32"
>> "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"
>> "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"
>> + "st,stih407-plls-c32-a0", "st,clkgen-plls-c32"
>> + "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
>> + "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"
>> + "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"
>>
>> "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
>> "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"
>>
>> -
>> - #clock-cells : From common clock binding; shall be set to 1.
>>
>> - clocks : From common clock binding
>> @@ -32,17 +35,17 @@ Required properties:
>>
>> Example:
>>
>> - clockgenA@...62000 {
>> + clockgen-a@...62000 {
>> reg = <0xfee62000 0xb48>;
>>
>> - CLK_S_A0_PLL: CLK_S_A0_PLL {
>> + clk_s_a0_pll: clk-s-a0-pll {
>> #clock-cells = <1>;
>> compatible = "st,clkgena-plls-c65";
>>
>> - clocks = <&CLK_SYSIN>;
>> + clocks = <&clk_sysin>;
>>
>> - clock-output-names = "CLK_S_A0_PLL0_HS",
>> - "CLK_S_A0_PLL0_LS",
>> - "CLK_S_A0_PLL1";
>> + clock-output-names = "clk-s-a0-pll0-hs",
>> + "clk-s-a0-pll0-ls",
>> + "clk-s-a0-pll1";
>> };
>> };
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
>> index 566c9d7..604766c 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
>> @@ -20,17 +20,17 @@ Required properties:
>>
>> Example:
>>
>> - clockgenA@...45000 {
>> + clockgen-a@...45000 {
>> reg = <0xfd345000 0xb50>;
>>
>> - CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
>> + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
>> #clock-cells = <0>;
>> compatible = "st,clkgena-prediv-c32",
>> "st,clkgena-prediv";
>>
>> - clocks = <&CLK_SYSIN>;
>> + clocks = <&clk_sysin>;
>>
>> - clock-output-names = "CLK_M_A2_OSC_PREDIV";
>> + clock-output-names = "clk-m-a2-osc-prediv";
>> };
>> };
>>
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
>> index 4e3ff28..109b3ed 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
>> @@ -32,22 +32,30 @@ Required properties:
>>
>> Example:
>>
>> - CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
>> + clockgen_c_vcc: clockgen-c-vcc@...e8308ac {
>> #clock-cells = <1>;
>> compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
>> reg = <0xfe8308ac 12>;
>>
>> - clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
>> - <&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
>> -
>> - clock-output-names =
>> - "CLK_S_PIX_HDMI", "CLK_S_PIX_DVO",
>> - "CLK_S_OUT_DVO", "CLK_S_PIX_HD",
>> - "CLK_S_HDDAC", "CLK_S_DENC",
>> - "CLK_S_SDDAC", "CLK_S_PIX_MAIN",
>> - "CLK_S_PIX_AUX", "CLK_S_STFE_FRC_0",
>> - "CLK_S_REF_MCRU", "CLK_S_SLAVE_MCRU",
>> - "CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
>> - "CLK_S_THSENS";
>> + clocks = <&clk_s_vcc_hd>,
>> + <&clockgen_c 1>,
>> + <&clk_s_tmds_fromphy>,
>> + <&clockgen_c 2>;
>> +
>> + clock-output-names = "clk-s-pix-hdmi",
>> + "clk-s-pix-dvo",
>> + "clk-s-out-dvo",
>> + "clk-s-pix-hd",
>> + "clk-s-hddac",
>> + "clk-s-denc",
>> + "clk-s-sddac",
>> + "clk-s-pix-main",
>> + "clk-s-pix-aux",
>> + "clk-s-stfe-frc-0",
>> + "clk-s-ref-mcru",
>> + "clk-s-slave-mcru",
>> + "clk-s-tmds-hdmi",
>> + "clk-s-hdmi-reject-pll",
>> + "clk-s-thsens";
>> };
>>
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
>> index 49ec5ae..427bad8 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
>> @@ -24,60 +24,72 @@ address is common of all subnode.
>> quadfs_node {
>> ...
>> };
>> +
>> + mux_node {
>> + ...
>> + };
>> +
>> + vcc_node {
>> + ...
>> + };
>> ...
>> };
>>
>> This binding uses the common clock binding[1].
>> -Each subnode should use the binding discribe in [2]..[4]
>> +Each subnode should use the binding discribe in [2]..[7]
>>
>> [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> -[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
>> -[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
>> -[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
>> +[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
>> +[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
>> +[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
>> +[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
>> +[6] Documentation/devicetree/bindings/clock/st,vcc.txt
>> +[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
>> +
>>
>> Required properties:
>> - reg : A Base address and length of the register set.
>>
>> Example:
>>
>> - clockgenA@...62000 {
>> + clockgen-a@...62000 {
>>
>> reg = <0xfee62000 0xb48>;
>>
>> - CLK_S_A0_PLL: CLK_S_A0_PLL {
>> + clk_s_a0_pll: clk-s-a0-pll {
>> #clock-cells = <1>;
>> compatible = "st,clkgena-plls-c65";
>>
>> - clocks = <&CLK_SYSIN>;
>> + clocks = <&clk-sysin>;
>>
>> - clock-output-names = "CLK_S_A0_PLL0_HS",
>> - "CLK_S_A0_PLL0_LS",
>> - "CLK_S_A0_PLL1";
>> + clock-output-names = "clk-s-a0-pll0-hs",
>> + "clk-s-a0-pll0-ls",
>> + "clk-s-a0-pll1";
>> };
>>
>> - CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
>> + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
>> #clock-cells = <0>;
>> compatible = "st,clkgena-prediv-c65",
>> "st,clkgena-prediv";
>>
>> - clocks = <&CLK_SYSIN>;
>> + clocks = <&clk_sysin>;
>>
>> - clock-output-names = "CLK_S_A0_OSC_PREDIV";
>> + clock-output-names = "clk-s-a0-osc-prediv";
>> };
>>
>> - CLK_S_A0_HS: CLK_S_A0_HS {
>> + clk_s_a0_hs: clk-s-a0-hs {
>> #clock-cells = <1>;
>> compatible = "st,clkgena-divmux-c65-hs",
>> "st,clkgena-divmux";
>>
>> - clocks = <&CLK_S_A0_OSC_PREDIV>,
>> - <&CLK_S_A0_PLL 0>, /* PLL0 HS */
>> - <&CLK_S_A0_PLL 2>; /* PLL1 */
>> + clocks = <&clk-s_a0_osc_prediv>,
>> + <&clk-s_a0_pll 0>, /* pll0 hs */
>> + <&clk-s_a0_pll 2>; /* pll1 */
>>
>> - clock-output-names = "CLK_S_FDMA_0",
>> - "CLK_S_FDMA_1",
>> - ""; /* CLK_S_JIT_SENSE */
>> - /* Fourth output unused */
>> + clock-output-names = "clk-s-fdma-0",
>> + "clk-s-fdma-1",
>> + ""; /* clk-s-jit-sense */
>> + /* fourth output unused */
>> };
>> };
>>
>> diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
>> index ec86d62..cedeb9c 100644
>> --- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
>> +++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
>> @@ -15,6 +15,9 @@ Required properties:
>> "st,stih416-quadfs432", "st,quadfs"
>> "st,stih416-quadfs660-E", "st,quadfs"
>> "st,stih416-quadfs660-F", "st,quadfs"
>> + "st,stih407-quadfs660-C", "st,quadfs"
>> + "st,stih407-quadfs660-D", "st,quadfs"
>> +
>>
>> - #clock-cells : from common clock binding; shall be set to 1.
>>
>> @@ -32,14 +35,14 @@ Required properties:
>>
>> Example:
>>
>> - CLOCKGEN_E: CLOCKGEN_E {
>> + clockgen_e: clockgen-e@...208bc {
>> #clock-cells = <1>;
>> compatible = "st,stih416-quadfs660-E", "st,quadfs";
>> reg = <0xfd3208bc 0xB0>;
>>
>> - clocks = <&CLK_SYSIN>;
>> - clock-output-names = "CLK_M_PIX_MDTP_0",
>> - "CLK_M_PIX_MDTP_1",
>> - "CLK_M_PIX_MDTP_2",
>> - "CLK_M_MPELPC";
>> + clocks = <&clk_sysin>;
>> + clock-output-names = "clk-m-pix-mdtp-0",
>> + "clk-m-pix-mdtp-1",
>> + "clk-m-pix-mdtp-2",
>> + "clk-m-mpelpc";
>> };
>> --
>> 1.9.1
>>
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists