| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Jul 2014 15:39:23 +0800 From: Wanpeng Li <wanpeng.li@...ux.intel.com> To: Jan Kiszka <jan.kiszka@...mens.com> Cc: Bandan Das <bsd@...hat.com>, Paolo Bonzini <pbonzini@...hat.com>, Gleb Natapov <gleb@...nel.org>, Hu Robert <robert.hu@...el.com>, kvm@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH] KVM: nVMX: Fix IRQs inject to L2 which belong to L1 since race On Fri, Jul 04, 2014 at 09:19:54AM +0200, Jan Kiszka wrote: >On 2014-07-04 08:08, Wanpeng Li wrote: >> On Fri, Jul 04, 2014 at 07:43:14AM +0200, Jan Kiszka wrote: >>> On 2014-07-04 04:52, Wanpeng Li wrote: >>>> On Thu, Jul 03, 2014 at 01:27:05PM -0400, Bandan Das wrote: >>>> [...] >>>>> # modprobe kvm_intel ept=0 nested=1 enable_shadow_vmcs=0 >>>>> >>>>> The Host CPU - Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz >>>>> qemu cmd to run L1 - >>>>> # qemu-system-x86_64 -drive file=level1.img,if=virtio,id=disk0,format=raw,cache=none,werror=stop,rerror=stop,aio=threads -drive file=level2.img,if=virtio,id=disk1,format=raw,cache=none,werror=stop,rerror=stop,aio=threads -vnc :2 --enable-kvm -monitor stdio -m 4G -net nic,macaddr=00:23:32:45:89:10 -net tap,ifname=tap0,script=/etc/qemu-ifup,downscript=no -smp 4 -cpu Nehalem,+vmx -serial pty >>>>> >>>>> qemu cmd to run L2 - >>>>> # sudo qemu-system-x86_64 -hda VM/level2.img -vnc :0 --enable-kvm -monitor stdio -m 2G -smp 2 -cpu Nehalem -redir tcp:5555::22 >>>>> >>>>> Additionally, >>>>> L0 is FC19 with 3.16-rc3 >>>>> L1 and L2 are Ubuntu 14.04 with 3.13.0-24-generic >>>>> >>>>> Then start a kernel compilation inside L2 with "make -j3" >>>>> >>>>> There's no call trace on L0, both L0 and L1 are hung (or rather really slow) and >>>>> L1 serial spews out CPU softlock up errors. Enabling panic on softlockup on L1 will give >>>>> a trace with smp_call_function_many() I think the corresponding code in kernel/smp.c that >>>>> triggers this is >>>>> >>>>> WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled() >>>>> && !oops_in_progress && !early_boot_irqs_disabled); >>>>> >>>>> I know in most cases this is usually harmless, but in this specific case, >>>>> it seems it's stuck here forever. >>>>> >>>>> Sorry, I don't have a L1 call trace handy atm, I can post that if you are interested. >>>>> >>>>> Note that this can take as much as 30 to 40 minutes to appear but once it does, >>>>> you will know because both L1 and L2 will be stuck with the serial messages as I mentioned >>>>> before. From my side, let me try this on another system to rule out any machine specific >>>>> weirdness going on.. >>>>> >>>> >>>> Thanks for your pointing out. >>>> >>>>> Please let me know if you need any further information. >>>>> >>>> >>>> I just run kvm-unit-tests w/ vmx.flat and eventinj.flat. >>>> >>>> >>>> w/ vmx.flat and w/o my patch applied >>>> >>>> [...] >>>> >>>> Test suite : interrupt >>>> FAIL: direct interrupt while running guest >>>> PASS: intercepted interrupt while running guest >>>> FAIL: direct interrupt + hlt >>>> FAIL: intercepted interrupt + hlt >>>> FAIL: direct interrupt + activity state hlt >>>> FAIL: intercepted interrupt + activity state hlt >>>> PASS: running a guest with interrupt acknowledgement set >>>> SUMMARY: 69 tests, 6 failures >>>> >>>> w/ vmx.flat and w/ my patch applied >>>> >>>> [...] >>>> >>>> Test suite : interrupt >>>> PASS: direct interrupt while running guest >>>> PASS: intercepted interrupt while running guest >>>> PASS: direct interrupt + hlt >>>> FAIL: intercepted interrupt + hlt >>>> PASS: direct interrupt + activity state hlt >>>> PASS: intercepted interrupt + activity state hlt >>>> PASS: running a guest with interrupt acknowledgement set >>>> >>>> SUMMARY: 69 tests, 2 failures >>> >>> Which version (hash) of kvm-unit-tests are you using? All tests up to >>> 307621765a are running fine here, but since a0e30e712d not much is >>> completing successfully anymore: >>> >> >> I just git pull my kvm-unit-tests to latest, the last commit is daeec9795d. >> >>> enabling apic >>> paging enabled >>> cr0 = 80010011 >>> cr3 = 7fff000 >>> cr4 = 20 >>> PASS: test vmxon with FEATURE_CONTROL cleared >>> PASS: test vmxon without FEATURE_CONTROL lock >>> PASS: test enable VMX in FEATURE_CONTROL >>> PASS: test FEATURE_CONTROL lock bit >>> PASS: test vmxon >>> FAIL: test vmptrld >>> PASS: test vmclear >>> init_vmcs : make_vmcs_current error >>> FAIL: test vmptrst >>> init_vmcs : make_vmcs_current error >>> vmx_run : vmlaunch failed. >>> FAIL: test vmlaunch >>> FAIL: test vmlaunch >>> >>> SUMMARY: 10 tests, 4 unexpected failures >> >> >> /opt/qemu/bin/qemu-system-x86_64 -enable-kvm -device pc-testdev -serial stdio >> -device isa-debug-exit,iobase=0xf4,iosize=0x4 -kernel ./x86/vmx.flat -cpu host >> >> Test suite : interrupt >> PASS: direct interrupt while running guest >> PASS: intercepted interrupt while running guest >> PASS: direct interrupt + hlt >> FAIL: intercepted interrupt + hlt >> PASS: direct interrupt + activity state hlt >> PASS: intercepted interrupt + activity state hlt >> PASS: running a guest with interrupt acknowledgement set >> >> SUMMARY: 69 tests, 2 failures > >Somehow I'm missing the other 31 vmx test we have now... Could you post >the full log? Please also post the output of qemu/scripts/kvm/vmxcap on >your test host to compare with what I have here. They are in attachment. Regards, Wanpeng Li > >Thanks, >Jan > >-- >Siemens AG, Corporate Technology, CT RTC ITP SES-DE >Corporate Competence Center Embedded Linux View attachment "vmxcap" of type "text/plain" (4533 bytes) View attachment "vmx.flat.dump" of type "text/plain" (2386 bytes)
Powered by blists - more mailing lists