lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1404505467-26526-13-git-send-email-javier.martinez@collabora.co.uk>
Date:	Fri,  4 Jul 2014 22:24:15 +0200
From:	Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To:	Lee Jones <lee.jones@...aro.org>
Cc:	Mark Brown <broonie@...nel.org>,
	Mike Turquette <mturquette@...aro.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Alessandro Zummo <a.zummo@...ertech.it>,
	Kukjin Kim <kgene.kim@...sung.com>,
	Doug Anderson <dianders@...omium.org>,
	Olof Johansson <olof@...om.net>,
	Tomeu Vizoso <tomeu.vizoso@...labora.com>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	Yadwinder Singh Brar <yadi.brar01@...il.com>,
	Tushar Behera <trblinux@...il.com>,
	Andreas Farber <afaerber@...e.de>,
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Subject: [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks

Maxim Integrated Power Management ICs are very similar with
regard to their clock outputs. Most of the clock drivers for
these chips are duplicating code and are simpler enough that
can be converted to use a generic driver to consolidate code
and avoid duplication.

Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
--

Changes since v6: None

Changes since v5:
 - Fix generic driver changes merged into max77802 clock patch by mistake.
   Suggested by Yadwinder Singh Brar.
 - Register clock lookups using clk_register_clkdev() instead of doing manually.
 - Use the managed devm_clk_register() function and remove clk un-registration.
 - Add "clock-output-names" property support. Suggested by Yadwinder Singh Brar.
 - Return the rate unconditionally in recalc_rate. Suggested by Mike Turquette.

Changes since v4: None

Changes since v3:
 - Don't change clock-names property to make clear that it's
   the consumer clock name and should not match the producer clock.
   Suggested by Doug Anderson.
---
 drivers/clk/Kconfig       |   3 +
 drivers/clk/Makefile      |   1 +
 drivers/clk/clk-max-gen.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/clk-max-gen.h |  32 ++++++++
 4 files changed, 228 insertions(+)
 create mode 100644 drivers/clk/clk-max-gen.c
 create mode 100644 drivers/clk/clk-max-gen.h

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9f9c5ae..73f78e8 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -32,6 +32,9 @@ config COMMON_CLK_WM831X
 
 source "drivers/clk/versatile/Kconfig"
 
+config COMMON_CLK_MAX_GEN
+        bool
+
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77686 MFD"
 	depends on MFD_MAX77686
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 567f102..6c1aff6 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_MACH_LOONGSON1)		+= clk-ls1x.o
+obj-$(CONFIG_COMMON_CLK_MAX_GEN)	+= clk-max-gen.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
diff --git a/drivers/clk/clk-max-gen.c b/drivers/clk/clk-max-gen.c
new file mode 100644
index 0000000..6505049
--- /dev/null
+++ b/drivers/clk/clk-max-gen.c
@@ -0,0 +1,192 @@
+/*
+ * clk-max-gen.c - Generic clock driver for Maxim PMICs clocks
+ *
+ * Copyright (C) 2014 Google, Inc
+ *
+ * Copyright (C) 2012 Samsung Electornics
+ * Jonghwa Lee <jonghwa3.lee@...sung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver is based on clk-max77686.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/export.h>
+
+struct max_gen_clk {
+	struct regmap *regmap;
+	u32 mask;
+	u32 reg;
+	struct clk_hw hw;
+};
+
+static struct max_gen_clk *to_max_gen_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct max_gen_clk, hw);
+}
+
+static int max_gen_clk_prepare(struct clk_hw *hw)
+{
+	struct max_gen_clk *max_gen = to_max_gen_clk(hw);
+
+	return regmap_update_bits(max_gen->regmap, max_gen->reg,
+				  max_gen->mask, max_gen->mask);
+}
+
+static void max_gen_clk_unprepare(struct clk_hw *hw)
+{
+	struct max_gen_clk *max_gen = to_max_gen_clk(hw);
+
+	regmap_update_bits(max_gen->regmap, max_gen->reg,
+			   max_gen->mask, ~max_gen->mask);
+}
+
+static int max_gen_clk_is_prepared(struct clk_hw *hw)
+{
+	struct max_gen_clk *max_gen = to_max_gen_clk(hw);
+	int ret;
+	u32 val;
+
+	ret = regmap_read(max_gen->regmap, max_gen->reg, &val);
+
+	if (ret < 0)
+		return -EINVAL;
+
+	return val & max_gen->mask;
+}
+
+static unsigned long max_gen_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	return 32768;
+}
+
+struct clk_ops max_gen_clk_ops = {
+	.prepare	= max_gen_clk_prepare,
+	.unprepare	= max_gen_clk_unprepare,
+	.is_prepared	= max_gen_clk_is_prepared,
+	.recalc_rate	= max_gen_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(max_gen_clk_ops);
+
+static struct clk *max_gen_clk_register(struct device *dev,
+					struct max_gen_clk *max_gen)
+{
+	struct clk *clk;
+	struct clk_hw *hw = &max_gen->hw;
+	int ret;
+
+	clk = devm_clk_register(dev, hw);
+	if (IS_ERR(clk))
+		return clk;
+
+	ret = clk_register_clkdev(clk, hw->init->name, NULL);
+
+	if (ret)
+		return ERR_PTR(ret);
+
+	return clk;
+}
+
+int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap,
+		      u32 reg, struct clk_init_data *clks_init, int num_init)
+{
+	int i, ret;
+	struct max_gen_clk *max_gen_clks;
+	struct clk **clocks;
+	struct device *dev = pdev->dev.parent;
+	const char *clk_name;
+	struct clk_init_data *init;
+
+	clocks = devm_kzalloc(dev, sizeof(struct clk *) * num_init, GFP_KERNEL);
+	if (!clocks)
+		return -ENOMEM;
+
+	max_gen_clks = devm_kzalloc(dev, sizeof(struct max_gen_clk)
+				    * num_init, GFP_KERNEL);
+	if (!max_gen_clks)
+		return -ENOMEM;
+
+	for (i = 0; i < num_init; i++) {
+		max_gen_clks[i].regmap = regmap;
+		max_gen_clks[i].mask = 1 << i;
+		max_gen_clks[i].reg = reg;
+
+		init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL);
+		if (!init)
+			return -ENOMEM;
+
+		if (dev->of_node &&
+		    !of_property_read_string_index(dev->of_node,
+						   "clock-output-names",
+						   i, &clk_name))
+			init->name = clk_name;
+		else
+			init->name = clks_init[i].name;
+
+		init->ops = clks_init[i].ops;
+		init->flags = clks_init[i].flags;
+
+		max_gen_clks[i].hw.init = init;
+
+		clocks[i] = max_gen_clk_register(dev, &max_gen_clks[i]);
+		if (IS_ERR(clocks[i])) {
+			ret = PTR_ERR(clocks[i]);
+			dev_err(dev, "failed to register %s\n",
+				max_gen_clks[i].hw.init->name);
+			return ret;
+		}
+	}
+
+	platform_set_drvdata(pdev, clocks);
+
+	if (dev->of_node) {
+		struct clk_onecell_data *of_data;
+
+		of_data = devm_kzalloc(dev, sizeof(*of_data), GFP_KERNEL);
+		if (!of_data)
+			return -ENOMEM;
+
+		of_data->clks = clocks;
+		of_data->clk_num = num_init;
+		ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
+					  of_data);
+
+		if (ret) {
+			dev_err(dev, "failed to register OF clock provider\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(max_gen_clk_probe);
+
+int max_gen_clk_remove(struct platform_device *pdev, int num_init)
+{
+	struct device *dev = pdev->dev.parent;
+
+	if (dev->of_node)
+		of_clk_del_provider(dev->of_node);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(max_gen_clk_remove);
diff --git a/drivers/clk/clk-max-gen.h b/drivers/clk/clk-max-gen.h
new file mode 100644
index 0000000..997e86f
--- /dev/null
+++ b/drivers/clk/clk-max-gen.h
@@ -0,0 +1,32 @@
+/*
+ * clk-max-gen.h - Generic clock driver for Maxim PMICs clocks
+ *
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CLK_MAX_GEN_H__
+#define __CLK_MAX_GEN_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/clkdev.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+
+int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap,
+		      u32 reg, struct clk_init_data *clks_init, int num_init);
+int max_gen_clk_remove(struct platform_device *pdev, int num_init);
+extern struct clk_ops max_gen_clk_ops;
+
+#endif /* __CLK_MAX_GEN_H__ */
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ