| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <s5htx6wrmjs.wl%tiwai@suse.de> Date: Sat, 05 Jul 2014 14:56:55 +0200 From: Takashi Iwai <tiwai@...e.de> To: Satoru Takeuchi <satoru.takeuchi@...il.com> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Guenter Roeck <linux@...ck-us.net>, linux-kernel@...r.kernel.org, torvalds@...ux-foundation.org, akpm@...ux-foundation.org, shuah.kh@...sung.com, stable@...r.kernel.org Subject: Re: [PATCH 3.14 00/59] 3.14.11-stable review At Sat, 05 Jul 2014 18:21:04 +0900, Satoru Takeuchi wrote: > > Hi Greg, > > Add Takashi Iwai to this thread. > > At Sat, 05 Jul 2014 16:00:41 +0900, > Satoru Takeuchi wrote: > > > > At Fri, 04 Jul 2014 22:45:42 -0700, > > Guenter Roeck wrote: > > > > > > On 07/04/2014 03:18 PM, Greg Kroah-Hartman wrote: > > > > This is the start of the stable review cycle for the 3.14.11 release. > > > > There are 59 patches in this series, all will be posted as a response > > > > to this one. If anyone has any issues with these being applied, please > > > > let me know. > > > > > > > > Responses should be made by Sun Jul 6 22:15:27 UTC 2014. > > > > Anything received after that time might be too late. > > > > > > > > > > Build results: > > > total: 144 pass: 130 skipped: 4 fail: 10 > > > Failed builds: > > > alpha:allmodconfig > > > i386:allyesconfig > > > i386:allmodconfig > > > powerpc:allmodconfig (binutils 2.23) > > > powerpc:allmodconfig (binutils 2.24) > > > sparc64:allmodconfig > > > unicore32:defconfig > > > x86_64:allyesconfig > > > x86_64:allmodconfig > > > xtensa:allmodconfig > > > > > > Qemu test for x86 failed. > > > > > > Build error is the same as seen with 3.14. > > > > > > sound/pci/hda/patch_sigmatel.c: In function 'stac92hd95_fixup_hp_led': > > > sound/pci/hda/patch_sigmatel.c:4143:3: error: implicit declaration of function 'codec_dbg' [-Werror=implicit-function-declaration] > > > > This kernel failed to build with the following error. Probably the root > > cause is the same as Guenter. I'm now bisecting to find the problematic > > patch... > > The following patch caused the boot failure of both this kernel and 3.10.47-rc1. > > alsa-hda-adjust-speaker-hpf-and-add-led-support-for-hp-spectre-13.patch: > =============================================================================== > From 8b3dfdaf0c25a584cb31d04d2574115cf2d422ab Mon Sep 17 00:00:00 2001 > From: Takashi Iwai <tiwai@...e.de> > Date: Tue, 24 Jun 2014 13:55:25 +0200 > Subject: ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13 > > From: Takashi Iwai <tiwai@...e.de> > > commit 8b3dfdaf0c25a584cb31d04d2574115cf2d422ab upstream. > > HP Spectre 13 has the IDT 92HD95 codec, and BIOS seems to set the > default high-pass filter in some "safer" range, which results in the > very soft tone from the built-in speakers in contrast to Windows. > Also, the mute LED control is missing, since 92HD95 codec still has no > HP-specific fixups for GPIO setups. > > This patch adds these missing features: the HPF is adjusted by the > vendor-specific verb, and the LED is set up from a DMI string (but > with the default polarity = 0 assumption due to the incomplete BIOS on > the given machine). > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74841 > Signed-off-by: Takashi Iwai <tiwai@...e.de> > Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org> > ... > =============================================================================== > > This patch uses codec_dbg(), however, this macro is intrdocuded by the > following patch and it's not applied to these stable-tree yet. > > =============================================================================== > ommit 4e76a8833fac8dc1735aa5be7d1b3c92c65e209e > Author: Takashi Iwai <tiwai@...e.de> > Date: Tue Feb 25 12:21:03 2014 +0100 > > ALSA: hda - Replace with standard printk > > Use dev_err() and co for messages from HD-audio controller and codec > drivers. The codec drivers are mostly bound with codec objects, so > some helper macros, codec_err(), codec_info(), etc, are provided. > They merely wrap the corresponding dev_xxx(). > > There are a few places still calling snd_printk() and its variants > as they are called without the codec or device context. > > Signed-off-by: Takashi Iwai <tiwai@...e.de> > ... > =============================================================================== > > Unfortunately I failed to apply this patch to 3.14.11-rc1 with the following > error log. > > =============================================================================== > $ git apply ~/src/test-linux-stable/extra_patch.txt > error: patch failed: sound/pci/hda/hda_intel.c:897 > error: sound/pci/hda/hda_intel.c: patch does not apply > error: sound/pci/hda/hda_sysfs.c: No such file or directory > =============================================================================== > > I'm not sure whether we should drop this patch or should apply extra patches > to remove this build failure. Any idea? Just drop the patch from 3.14 and earlier stable kernels. If anyone wants to use the laptop, they should use 3.15.x or later kernel. The second patch cannot be used for 3.14 at all because it requires the other infrastructure change that was introduced in 3.15. Alternatively, you can replace codec_dbg() with pr_debug() and drop the first argument. thanks, Takashi > > Thanks, > Satoru > > > > > > =============================================================================== > > ... > > home/sat/src/test-linux-stable/linux-stable/sound/pci/hda/patch_sigmatel.c:4143:3: error: implicit declaration of function ‘codec_dbg’ [-Werror=implicit-function-declaration] > > codec_dbg(codec, "mute LED gpio %d polarity %d\n", > > ^ > > LD [M] sound/pci/echoaudio/snd-indigoio.o > > LD [M] sound/pci/echoaudio/snd-indigodj.o > > LD [M] sound/pci/echoaudio/snd-indigoiox.o > > LD [M] sound/pci/echoaudio/snd-indigodjx.o > > CC [M] sound/pci/hda/patch_via.o > > LD sound/pci/ice1712/built-in.o > > CC [M] sound/pci/ice1712/ice1712.o > > cc1: some warnings being treated as errors > > /home/sat/src/test-linux-stable/linux-stable/scripts/Makefile.build:308: recipe for target 'sound/pci/hda/patch_sigmatel.o' failed > > make[4]: *** [sound/pci/hda/patch_sigmatel.o] Error 1 > > ... > > CC drivers/iommu/irq_remapping.o > > /home/sat/src/test-linux-stable/linux-stable/scripts/Makefile.build:455: recipe for target 'sound/pci/hda' failed > > make[3]: *** [sound/pci/hda] Error 2 > > ... > > /home/sat/src/test-linux-stable/linux-stable/scripts/Makefile.build:455: recipe for target 'sound/pci' failed > > make[2]: *** [sound/pci] Error 2 > > /home/sat/src/test-linux-stable/linux-stable/Makefile:841: recipe for target 'sound' failed > > make[1]: *** [sound] Error 2 > > ... > > Makefile:133: recipe for target 'sub-make' failed > > make: *** [sub-make] Error 2 > > FAILED! > > CRITICAL FAILURE... failed build > > ... > > =============================================================================== > > > > - Test Cases: > > - Build this kernel. > > - Boot this kernel. > > - Build the latest mainline kernel with this kernel. > > > > - Test Tool: > > https://github.com/satoru-takeuchi/test-linux-stable > > > > - Test Result (kernel .config, ktest config and test log): > > http://satoru-takeuchi.org/test-linux-stable/results/<version>-<test datetime>.tar.xz > > > > - Build Environment: > > - OS: Debian Jessy x86_64 > > - CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4 > > - memory: 8GB > > > > - Test Target Environment: > > - Debian Jessy x86_64 (KVM guest on the Build Environment) > > - # of vCPU: 2 > > - memory: 2GB > > > > Thanks, > > Satoru > > > > > > > > > > Guenter > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists