[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <001c01cf981b$25138950$6f3a9bf0$@samsung.com>
Date: Sat, 05 Jul 2014 12:04:10 +0530
From: Pankaj Dubey <pankaj.dubey@...sung.com>
To: 'Tomasz Figa' <t.figa@...sung.com>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: kgene.kim@...sung.com, linux@....linux.org.uk,
vikas.sajjan@...sung.com, joshi@...sung.com, naushad@...sung.com,
thomas.ab@...sung.com, chow.kim@...sung.com
Subject: RE: [PATCH v5 2/5] ARM: EXYNOS: Refactored code for using PMU address
via DT
Hi Tomasz,
On Monday, June 30, 2014 Tomasz Figa wrote:
> Hi Pankaj,
>
> This looks much better now, but please see my comments inline.
>
> On 25.06.2014 16:03, Pankaj Dubey wrote:
> > Under "arm/mach-exynos" many files are using PMU register offsets.
> > Since we have added support for accessing PMU base address via DT, now
> > we can remove PMU mapping from exynosX_iodesc. Let's convert all these
> > access using iomapped address.
> > This will help us in removing static mapping of PMU base address as
> > well as help in reducing dependency over machine header files.
> > Thus helping for migration of PMU implementation from machine to
> > driver folder which can be reused for ARM64 bsed SoC.
>
> [snip]
>
> > @@ -152,7 +142,7 @@ static void exynos_restart(enum reboot_mode mode,
> > const char *cmd) {
> > struct device_node *np;
> > u32 val = 0x1;
> > - void __iomem *addr = EXYNOS_SWRESET;
> > + void __iomem *addr = NULL;
>
> Instead of initializing this variable to NULL, pmu_base_addr +
> EXYNOS_SWRESET could be used instead.
OK.
>
> >
> > if (of_machine_is_compatible("samsung,exynos5440")) {
> > u32 status;
> > @@ -165,9 +155,9 @@ static void exynos_restart(enum reboot_mode mode,
> const char *cmd)
> > val = __raw_readl(addr);
> >
> > val = (val & 0xffff0000) | (status & 0xffff);
> > - }
> > -
> > - __raw_writel(val, addr);
> > + __raw_writel(val, addr);
> > + } else
> > + __raw_writel(val, pmu_base_addr + EXYNOS_SWRESET);
>
> The above would allow this code to be left unchanged.
>
> > }
> >
>
> [snip]
>
> > diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> > index f127c0c..519aefe 100644
> > --- a/arch/arm/mach-exynos/pm.c
> > +++ b/arch/arm/mach-exynos/pm.c
> > @@ -37,6 +37,9 @@
> > #include "regs-pmu.h"
> > #include "regs-sys.h"
> >
> > +#define pmu_raw_writel(val, offset) \
> > + __raw_writel(val, pmu_base_addr + offset)
>
> Please make this static inline.
>
OK.
> > +
> > /**
> > * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
> > * @hwirq: Hardware IRQ signal of the GIC @@ -111,7 +114,7 @@ static
> > int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
> > */
> > void exynos_cpu_power_down(int cpu)
> > {
> > - __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > + pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > }
> >
> > /**
> > @@ -122,8 +125,8 @@ void exynos_cpu_power_down(int cpu)
> > */
> > void exynos_cpu_power_up(int cpu)
> > {
> > - __raw_writel(S5P_CORE_LOCAL_PWR_EN,
> > - EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> > + EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > }
> >
> > /**
> > @@ -133,7 +136,7 @@ void exynos_cpu_power_up(int cpu)
> > */
> > int exynos_cpu_power_state(int cpu)
> > {
> > - return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
> > + return (__raw_readl(pmu_base_addr +
> EXYNOS_ARM_CORE_STATUS(cpu)) &
> > S5P_CORE_LOCAL_PWR_EN);
>
> __raw_readl()s could be replaced with pmu_raw_readl()s too.
>
OK, will update all these.
> Best regards,
> Tomasz
Thanks,
Pankaj Dubey
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists