[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 7 Jul 2014 01:29:22 -0700
From: Tony Lindgren <tony@...mide.com>
To: Roger Quadros <rogerq@...com>
Cc: kishon@...com, balbi@...com, nsekhar@...com, nm@...com,
george.cherian@...com, sergei.shtylyov@...entembedded.com,
linux-omap@...r.kernel.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, Rajendra Nayak <rnayak@...com>,
Tero Kristo <t-kristo@...com>
Subject: Re: [PATCH v2 1/6] ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply
always on
* Roger Quadros <rogerq@...com> [140704 02:57]:
> After clarification from the hardware team it was found that
> this 1.8V PHY supply can't be switched OFF when SoC is Active.
>
> Since the PHY IPs don't contain isolation logic built in the design to
> allow the power rail to be switched off, there is a very high risk
> of IP reliability and additional leakage paths which can result in
> additional power consumption.
>
> The only scenario where this rail can be switched off is part of Power on
> reset sequencing, but it needs to be kept always-on during operation.
>
> This patch is required for proper functionality of USB, SATA
> and PCIe on DRA7-evm.
>
> CC: Rajendra Nayak <rnayak@...com>
> CC: Tero Kristo <t-kristo@...com>
> Signed-off-by: Roger Quadros <rogerq@...com>
Best that you queue this with the series:
Acked-by: Tony Lindgren <tony@...mide.com>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 4adc280..8308954 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -240,6 +240,7 @@
> regulator-name = "ldo3";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> regulator-boot-on;
> };
>
> --
> 1.8.3.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists