ubuntu@tegra-ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.33-g71c61a3-dirty (vidyas@vidyas-desktop) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #134 SMP PREEMPT Tue Jul 8 10:20:46 IST 2014 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: laguna, model: NVIDIA Tegra124 Laguna, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found vpr, start=0xf6900000 size=9700000 [ 0.000000] Found tsec, start=0xf4900000 size=2000000<6>[ 0.000000] Found tegra_fbmem: 01f60000@ad012000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: ad012000 - aef71fff [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: eec00000 - efdfffff [ 0.000000] 2nd Framebuffer: efe00000 - f45fffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: f6900000 - ffffffff [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ac000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 453632 [ 0.000000] free_area_init_node: node 0, pgdat c0cbc940, node_mem_map c0e09000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2204 pages used for memmap [ 0.000000] HighMem zone: 259072 pages, LIFO batch:31 [ 0.000000] failed to read /chosen/proc-board/id [ 0.000000] failed to read /chosen/pmu-board/id [ 0.000000] DTS File Name: /home/vidyas/x/l4t-dev-kernel/kernel/arch/arm/boot/dts/tegra124-laguna.dts [ 0.000000] Tegra12: CPU Speedo value 2425, Soc Speedo value 2367, Gpu Speedo value 2194 [ 0.000000] Tegra12: CPU Speedo ID 0, Soc Speedo ID 0, Gpu Speedo ID 0 [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0 [ 0.000000] Tegra Revision: A01 SKU: 0x0 CPU Process: 0 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON [ 0.000000] tegra_clk_shared_bus_user_init: c3bus client tsec left ON [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000 [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000 [ 0.000000] Lowering se maximum rate from 600000000 to 480000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 648000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2014500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1220mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1cc2000 s14976 r8192 d13696 u36864 [ 0.000000] pcpu-alloc: s14976 r8192 d13696 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452112 [ 0.000000] Kernel command line: tegraid=40.1.1.0.0 mem=1862M@2048M memtype=0 vpr=151M@3945M tsec=32M@3913M otf_key=930b4d084d819132a17ee733230d919f ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=4 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,3 console=tty1 sku_override=0 usbcore.old_scheme_first=1 lp0_vec=2064@0xf46ff000 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0167:0x0000:0x02:0x43:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0167:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt gpt_sector=94207 modem_id=0 watchdog=disable android.kerneltype=normal [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1772MB = 1772MB total [ 0.000000] Memory: 1735468k/1735468k available, 171220k reserved, 1036288K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbe800000 - 0xbfe00000 ( 22 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b04848 (11251 kB) [ 0.000000] .init : 0xc0b05000 - 0xc0b83a80 ( 507 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0cd4500 (1346 kB) [ 0.000000] .bss : 0xc0cd4500 - 0xc0d5d884 ( 549 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.003865] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.003935] pid_max: default: 32768 minimum: 301 [ 0.004254] Mount-cache hash table entries: 512 [ 0.026304] Initializing cgroup subsys debug [ 0.026349] Initializing cgroup subsys freezer [ 0.026435] CPU: Testing write buffer coherency: ok [ 0.026531] ftrace: allocating 32372 entries in 64 pages [ 0.068423] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.068467] Setting up static identity map for 0xc07f4460 - 0xc07f44f4 [ 0.072449] ftrace: Allocated trace_printk buffers [ 0.080160] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.083169] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.086219] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.086414] Brought up 4 CPUs [ 0.086478] SMP: Total of 4 processors activated. [ 0.086494] CPU: All CPU(s) started in SVC mode. [ 0.087366] devtmpfs: initialized [ 0.096642] pinctrl core: initialized pinctrl subsystem [ 0.096965] regulator-dummy: no parameters [ 0.097692] NET: Registered protocol family 16 [ 0.100169] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.100578] cpuidle: using governor ladder [ 0.100599] cpuidle: using governor menu [ 0.101909] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.103720] failed to read /chosen/display-board/id [ 0.105875] ardbeg_camera_auxdata: update camera lookup table. [ 0.112884] tegra124-pinctrl 70000868.pinmux: invalid group "spdif_in_pk6" for function "rsvd1" [ 0.115230] tegra124-pinctrl 70000868.pinmux: Probed Tegra pinctrl driver [ 0.115955] GPIO chip tegra-gpio: created GPIO range 0->250 ==> 70000868.pinmux PIN 0->250 [ 0.116006] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.116667] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.124019] Wake16 for irq=34 [ 0.130800] board_info: id:sku:fab:major:minor = 0x0167:0x0000:0x02:0x43:0x00 [ 0.130871] disp1 pclk=154700000 [ 0.130882] disp2 pclk=297000000 [ 0.130893] Selecting UARTD as the debug console [ 0.130940] The debug console clock name is uartd [ 0.131352] ardbeg_modem_init: modem_id = 0 [ 0.133551] Clear bootloader IO dpd settings [ 0.133745] Loading PM359 EMC tables. [ 0.133998] tegra: pll_m is selected as scalable EMC clock source [ 0.134022] tegra: selected pll_m scaling option but no backup source: [ 0.134042] removed not supported entries from the table: [ 0.134065] Lowering emc maximum rate from 1200000000 to 792000000 [ 0.134093] tegra: validated EMC DFS table [ 0.134192] laguna_edp_init: CPU regulator 15000 mA [ 0.375651] laguna_edp_init: GPU regulator 8000 mA [ 0.375688] swapper/0 isomgr_init(): iso emc max clk=792000KHz [ 0.375707] swapper/0 isomgr_init(): max_iso_bw=6336000KB<6>[ 0.376028] ardbeg_touch_init init raydium touch [ 0.376170] Raydium - touch platform_id : 8 [ 0.459944] platform tegradc.0: IOVA linear map 0xeec00000(1200000) [ 0.464172] platform tegradc.0: IOVA linear map 0xefe00000(4800000) [ 0.471798] platform tegradc.0: IOVA linear map 0xad012000(1f60000) [ 0.475074] platform tegradc.0: IOVA linear map 0xf6900000(9700000) [ 0.477310] platform tegradc.1: IOVA linear map 0xeec00000(1200000) [ 0.481534] platform tegradc.1: IOVA linear map 0xefe00000(4800000) [ 0.489186] platform tegradc.1: IOVA linear map 0xad012000(1f60000) [ 0.492481] platform tegradc.1: IOVA linear map 0xf6900000(9700000) [ 0.492723] soctherm THERMTRIP not supported on PMU (BOARD_P359) [ 0.492988] tegra11_soctherm_oc_int_init(): OC interrupts are not enabled [ 0.493217] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.493245] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.493546] MC mapped MMIO address: 0xfde19000 [ 0.493852] mc-err: Started MC error interface! [ 0.504376] bio: create slab at 0 [ 0.506219] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name [ 0.506252] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name [ 0.506281] of_get_named_gpio_flags: can't parse gpios property [ 0.506383] vdd-ac-bat: 8400 mV [ 0.506523] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name [ 0.506554] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name [ 0.506579] of_get_named_gpio_flags: can't parse gpios property [ 0.506675] vdd-3v3-aon: 3300 mV [ 0.506835] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name [ 0.506865] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name [ 0.506893] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name [ 0.506946] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name [ 0.506976] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name [ 0.507003] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name [ 0.507031] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name [ 0.507059] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name [ 0.507087] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name [ 0.507115] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name [ 0.507157] of_get_named_gpio_flags: can't parse gpios property [ 0.507257] reg-3v3-supply: 3300 mV [ 0.508887] vgaarb: loaded [ 0.509543] SCSI subsystem initialized [ 0.509726] libata version 3.00 loaded. [ 0.509913] usbcore: registered new interface driver usbfs [ 0.509998] usbcore: registered new interface driver hub [ 0.510113] usbcore: registered new device driver usb [ 0.510394] of_get_named_gpio_flags exited with status 20 [ 0.510412] of_get_named_gpio_flags exited with status 21 [ 0.511746] gpiochip_find_base: found new base at 1008 [ 0.511843] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca6416 [ 0.512282] of_get_named_gpio_flags exited with status 157 [ 0.512300] of_get_named_gpio_flags exited with status 158 [ 0.512815] of_get_named_gpio_flags exited with status 217 [ 0.512831] of_get_named_gpio_flags exited with status 218 [ 0.513138] of_get_named_gpio_flags exited with status 172 [ 0.513155] of_get_named_gpio_flags exited with status 173 [ 0.513434] of_get_named_gpio_flags exited with status 206 [ 0.513450] of_get_named_gpio_flags exited with status 207 [ 0.514784] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x05 [ 0.514811] as3722 4-0040: Device version 1V1 and platform version 1V2 [ 0.514833] as3722 4-0040: Final OTP version 1V2 [ 0.519039] gpiochip_find_base: found new base at 1000 [ 0.519157] gpiochip_add: registered GPIOs 1000 to 1007 on device: as3722-gpio [ 0.519188] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7 [ 0.519379] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.519435] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.519486] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.519515] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.519543] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.519572] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.519627] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.519656] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.519685] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.519714] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.519742] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.519771] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.519827] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.519856] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.519884] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.519918] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.519947] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name [ 0.519975] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name [ 0.520004] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name [ 0.520055] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520102] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.520154] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520183] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.520211] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.520239] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.520267] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.520294] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.520322] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.520350] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.520379] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.520431] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.520508] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.520537] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.520587] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520635] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520664] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.520715] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520785] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520814] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.520888] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.520918] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.520946] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.521875] vdd-cpu: 650 <--> 1300 mV at 1000 mV at 3500 mA [ 0.523180] vdd-core: 700 <--> 1350 mV at 1150 mV at 3500 mA [ 0.524180] vddio-ddr: at 1350 mV [ 0.524543] as3722-sd3: no parameters [ 0.524865] avdd-pll-pex: 1050 mV [ 0.525870] vdd-1v8: at 1800 mV [ 0.526232] vdd-gpu: applied init 1000000uV constraint [ 0.527072] vdd-gpu: 650 <--> 1200 mV at 1000 mV at 3500 mA [ 0.527466] avdd-pll: at 1050 mV at 300 mA [ 0.528729] vdd-cam: 1800 mV at 150 mA [ 0.529252] avdd-dsi-csi: at 1200 mV at 150 mA [ 0.530166] vdd-rtc: 800 mV at 150 mA [ 0.530711] avdd-cam: 2700 mV at 150 mA [ 0.531255] vdd-1v2-cam: 1200 mV at 150 mA [ 0.531639] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA [ 0.532174] vdd-1v1-cam: 1050 mV at 150 mA [ 0.533087] avdd-spi: 3300 mV at 150 mA [ 0.533634] vdd-2v7-cam: 2700 mV at 150 mA [ 0.534197] vpp-fuse: 1800 mV at 150 mA [ 0.534876] of_get_named_gpio_flags: can't parse gpios property [ 0.534888] of_get_named_gpio_flags: can't parse gpios property [ 0.535413] Linux video capture interface: v2.00 [ 0.536563] Advanced Linux Sound Architecture Driver Initialized. [ 0.537330] of_get_named_gpio_flags exited with status 108 [ 0.537460] usb0-vbus: 5000 mV [ 0.537649] of_get_named_gpio_flags exited with status 109 [ 0.537769] usb1-usb2-vbus: 5000 mV [ 0.537941] of_get_named_gpio_flags exited with status 86 [ 0.538066] vdd-hdmi: 5000 mV [ 0.538221] of_get_named_gpio_flags exited with status 63 [ 0.538349] avdd-hdmi-pll: 3300 mV [ 0.538404] avdd-hdmi-pll: supplied by avdd-pll-pex [ 0.538585] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name [ 0.538626] of_get_named_gpio_flags exited with status 122 [ 0.538730] vdd-lcd-bl: 3300 mV [ 0.538878] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name [ 0.538919] of_get_named_gpio_flags exited with status 58 [ 0.539030] vdd-lcd-bl-en: 5000 mV [ 0.539191] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name [ 0.539219] of_get_named_gpio_flags: can't parse gpios property [ 0.539348] reg-5v0-supply: 5000 mV [ 0.539519] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name [ 0.539551] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name [ 0.539579] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name [ 0.539625] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name [ 0.539654] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name [ 0.539682] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name [ 0.539710] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name [ 0.539738] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name [ 0.539766] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name [ 0.539820] of_get_named_gpio_flags: can't parse gpios property [ 0.539911] reg-1v8-supply: 1800 mV [ 0.540203] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name [ 0.540246] of_get_named_gpio_flags exited with status 1008 [ 0.540752] reg-dcdc-1v2: 1200 mV [ 0.540929] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name [ 0.540973] of_get_named_gpio_flags exited with status 1002 [ 0.541508] as3722-gpio2-supply: 3300 mV [ 0.541713] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name [ 0.541756] of_get_named_gpio_flags exited with status 1004 [ 0.542472] as3722-gpio4-supply: 3300 mV [ 0.542648] of_get_named_gpio_flags exited with status 136 [ 0.542765] sdmmc-en-supply: 3300 mV [ 0.542936] of_get_named_gpio_flags exited with status 1010 [ 0.543426] vdd-cdc-1v2-aud: 1200 mV [ 0.543588] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name [ 0.543620] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name [ 0.543649] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name [ 0.543675] of_get_named_gpio_flags: can't parse gpios property [ 0.543769] reg-aon-1v8: 1800 mV [ 0.543937] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name [ 0.543965] of_get_named_gpio_flags: can't parse gpios property [ 0.544060] reg-aon-1v2: 1200 mV [ 0.547376] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected [ 0.550915] tegra-pwr-detect power-detect.2: started io power detection dynamic control [ 0.550948] tegra-pwr-detect power-detect.2: NO_IO_POWER setting 0x0 package mask 0x1 [ 0.551080] Switching to clocksource arch_sys_counter [ 0.572953] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.573237] nvmap_page_pool_init: Total MB RAM: 1710 [ 0.573260] nvmap_page_pool_init: nvmap page pool size: 54720 pages (213 MB) [ 0.573641] nvmap_background_zero_allocator: PP alloc thread starting. [ 0.573817] iram: dma coherent mem declare 0x40001000,258048 [ 0.574806] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.574917] vpr: dma coherent mem declare 0xf6900000,158334976 [ 0.578624] misc nvmap: created heap vpr base 0xf6900000 size (154624KiB) [ 0.578788] nvmap:inner cache maint threshold=2097152 [ 0.589616] Wake39 for irq=52 [ 0.589727] tegra-otg tegra-otg: otg transceiver registered [ 0.590181] NET: Registered protocol family 2 [ 0.590942] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.591182] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.591390] TCP: Hash tables configured (established 8192 bind 8192) [ 0.591462] TCP: reno registered [ 0.591487] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.591544] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.591853] NET: Registered protocol family 1 [ 0.592314] RPC: Registered named UNIX socket transport module. [ 0.592338] RPC: Registered udp transport module. [ 0.592357] RPC: Registered tcp transport module. [ 0.592376] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.592402] PCI: CLS 0 bytes, default 64 [ 0.592768] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 0.599325] host1x host1x: initialized [ 0.600789] CPU PMU: probing PMU on CPU 0 [ 0.600828] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.601596] tegra_throttle : init passed [ 0.601705] Tegra cpuquiet initialized: disabled [ 0.601861] cpu-tegra: init EDP limit: 2014 MHz [ 0.602394] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.602933] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.603259] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.603930] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.605631] bounce pool size: 64 pages [ 0.607318] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.607668] NTFS driver 2.1.30 [Flags: R/O]. [ 0.607830] fuse init (API version 7.22) [ 0.608090] msgmni has been set to 1397 [ 0.609881] io scheduler noop registered (default) [ 0.610349] of_get_named_gpio_flags exited with status 113 [ 0.610371] of_get_named_gpio_flags exited with status 235 [ 0.610391] of_get_named_gpio_flags exited with status 1016 [ 0.610589] PCIE.C: tegra_pcie_enable_regulators : regulator hvdd_pex [ 0.610696] PCIE.C: tegra_pcie_enable_regulators : regulator pexio [ 0.611486] tegra-pcie 1003000.pcie-controller: acquiring hotplug_detect = 113 [ 0.612300] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 0.644852] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 1.047279] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.449299] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.851327] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.853384] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring [ 1.853580] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.853613] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.853639] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.853668] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.853690] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.853747] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 1.853836] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.854079] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.854324] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.854367] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit] [ 1.854533] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.856203] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.856250] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 1.856280] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.856325] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.856350] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.856379] PCI: enabling device 0000:00:01.0 (0140 -> 0143) [ 1.856423] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 1.856684] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.856710] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.856736] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.856854] aer 0000:00:01.0:pcie02: service driver aer loaded [ 1.856913] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 1.857654] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.857767] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.862380] tsec tsec: initialized [ 1.864262] isp isp.0: initialized [ 1.865291] isp isp.1: initialized [ 1.866943] falcon vic03.0: initialized [ 1.868238] falcon msenc: initialized [ 1.869060] tegradc tegradc.0: DSI: HS clock rate is 464500 [ 1.870535] p,wuxga-10-1 panel dt support not available [ 2.151694] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000 [ 2.240315] tegradc tegradc.0: DSI pad calibration done [ 2.247486] tegradc tegradc.0: probed [ 2.248226] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110 [ 2.270357] Console: switching to colour frame buffer device 240x75 [ 2.291708] tegradc tegradc.0: fb registered [ 2.297685] gpio wake4 for gpio=111 [ 2.298054] tegra-i2c tegra12-i2c.3: no acknowledge from address 0x50 [ 2.299212] tegradc tegradc.1: probed [ 2.300529] tegradc tegradc.1: fb registered [ 2.300643] hdmi_state_machine_worker (tid ebb03580): state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 2.300820] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 2.304292] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 2.305092] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.306539] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 2.342699] hdmi_state_machine_worker (tid ebb03580): state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 2.342703] hdmi_disable_l: audio_switch 0 [ 2.342706] hdmi_disable_l: hpd_switch 0 [ 2.342715] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug) [ 2.356170] hdmi_state_machine_worker (tid ebb03580): state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 2.356174] hdmi_disable_l: audio_switch 0 [ 2.356177] hdmi_disable_l: hpd_switch 0 [ 2.356184] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled) [ 4.625864] console [ttyS0] enabled [ 4.630389] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 4.638509] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 4.646632] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 4.660056] loop: module loaded [ 4.663556] nct1008_nct72 1-004c: success in enabling rail vdd_nct72 [ 4.679209] gpio wake35 for gpio=70 [ 4.682834] nct1008_nct72 1-004c: nct1008_probe: initialized [ 4.689842] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 4.701087] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 4.713847] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 4.721317] tegra-sata tegra-sata.0: version 1.0 [ 4.721351] of_get_named_gpio_flags exited with status 1017 [ 4.722651] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 4.732048] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 4.742089] scsi0 : tegra-sata [ 4.745570] scsi1 : tegra-sata [ 4.748888] ata1: SATA max UDMA/133 irq 55 [ 4.753112] ata2: DUMMY [ 4.757619] tun: Universal TUN/TAP device driver, 1.6 [ 4.762775] tun: (C) 1999-2004 Max Krasnyansky [ 4.769380] PPP generic driver version 2.4.2 [ 4.773931] PPP BSD Compression module registered [ 4.778744] PPP Deflate Compression module registered [ 4.783905] PPP MPPE Compression module registered [ 4.788796] NET: Registered protocol family 24 [ 4.793454] usbcore: registered new interface driver asix [ 4.799082] usbcore: registered new interface driver ax88179_178a [ 4.805418] usbcore: registered new interface driver cdc_ether [ 4.811408] usbcore: registered new interface driver smsc95xx [ 4.817323] usbcore: registered new interface driver cdc_subset [ 4.828434] usbcore: registered new interface driver cdc_ncm [ 4.839227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.851051] tegra USB phy - inst[1] platform info: [ 4.860919] port_otg: no [ 4.868436] has_hostpc: yes [ 4.876212] phy_interface: USB_PHY_INTF_UTMI [ 4.885474] op_mode: TEGRA_USB_OPMODE_HOST [ 4.894534] qc2_voltage: 0 [ 4.902158] hot_plug: disabled [ 4.910096] remote_wakeup: enabled [ 4.919845] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller [ 4.930663] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1 [ 4.943215] Wake40 for irq=53 [ 4.950972] Wake42 for irq=53 [ 4.958729] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000 [ 4.975177] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10 [ 4.985907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.997385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.009350] usb usb1: Product: Tegra EHCI Host Controller [ 5.019496] usb usb1: Manufacturer: Linux 3.10.33-g71c61a3-dirty ehci_hcd [ 5.031129] usb usb1: SerialNumber: tegra-ehci.1 [ 5.041063] hub 1-0:1.0: USB hub found [ 5.049649] hub 1-0:1.0: 1 port detected [ 5.058740] tegra USB phy - inst[2] platform info: [ 5.060207] ata1: SATA link down (SStatus 0 SControl 300) [ 5.078503] port_otg: no [ 5.085736] has_hostpc: yes [ 5.093182] phy_interface: USB_PHY_INTF_UTMI [ 5.102205] op_mode: TEGRA_USB_OPMODE_HOST [ 5.110922] qc2_voltage: 0 [ 5.118157] hot_plug: disabled [ 5.125713] remote_wakeup: enabled [ 5.135006] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller [ 5.145479] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2 [ 5.157669] Wake41 for irq=129 [ 5.165220] Wake43 for irq=129 [ 5.172761] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000 [ 5.188175] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10 [ 5.198506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.209627] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.221199] usb usb2: Product: Tegra EHCI Host Controller [ 5.230877] usb usb2: Manufacturer: Linux 3.10.33-g71c61a3-dirty ehci_hcd [ 5.241978] usb usb2: SerialNumber: tegra-ehci.2 [ 5.251374] hub 2-0:1.0: USB hub found [ 5.259466] hub 2-0:1.0: 1 port detected [ 5.268009] ehci-pci: EHCI PCI platform driver [ 5.276825] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.286321] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 5.299310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.310376] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.321912] usb usb3: Product: xHCI Host Controller [ 5.331001] usb usb3: Manufacturer: Linux 3.10.33-g71c61a3-dirty xhci_hcd [ 5.342021] usb usb3: SerialNumber: 0000:01:00.0 [ 5.351159] xHCI xhci_add_endpoint called for root hub [ 5.351169] xHCI xhci_check_bandwidth called for root hub [ 5.351300] hub 3-0:1.0: USB hub found [ 5.359173] hub 3-0:1.0: 2 ports detected [ 5.367627] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.377015] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4 [ 5.388761] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.399768] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.411236] usb usb4: Product: xHCI Host Controller [ 5.420300] usb usb4: Manufacturer: Linux 3.10.33-g71c61a3-dirty xhci_hcd [ 5.431342] usb usb4: SerialNumber: 0000:01:00.0 [ 5.440525] xHCI xhci_add_endpoint called for root hub [ 5.440534] xHCI xhci_check_bandwidth called for root hub [ 5.440660] hub 4-0:1.0: USB hub found [ 5.448626] hub 4-0:1.0: 2 ports detected [ 5.462529] usbcore: registered new interface driver cdc_acm [ 5.472455] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.484846] usbcore: registered new interface driver cdc_wdm [ 5.494956] usbcore: registered new interface driver usb-storage [ 5.505463] usbcore: registered new interface driver usbserial [ 5.515719] usbcore: registered new interface driver option [ 5.525712] usbserial: USB Serial support registered for GSM modem (1-port) [ 5.537227] usbcore: registered new interface driver pl2303 [ 5.547218] usbserial: USB Serial support registered for pl2303 [ 5.557581] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 5.569720] tegra USB phy - inst[0] platform info: [ 5.579000] port_otg: yes [ 5.586089] has_hostpc: yes [ 5.593356] phy_interface: USB_PHY_INTF_UTMI [ 5.602111] op_mode: TEGRA_USB_OPMODE_DEVICE [ 5.610872] qc2_voltage: 0 [ 5.618035] vbus_pmu_irq: 0 [ 5.625246] charging: enabled [ 5.632562] remote_wakeup: disabled [ 5.643271] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 5.657854] usbcore: registered new interface driver xpad [ 5.670708] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 5.681957] as3722-rtc as3722-rtc.1: RTC interrupt 449 [ 5.694602] i2c /dev entries driver [ 5.705997] i2c i2c-0: Added multiplexed i2c bus 6 [ 5.715557] i2c i2c-0: Added multiplexed i2c bus 7 [ 5.725494] i2c i2c-0: Added multiplexed i2c bus 8 [ 5.734226] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 5.745994] i2c i2c-0: Added multiplexed i2c bus 9 [ 5.755241] pca954x 0-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 5.767616] virtual_init [ 5.776701] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 5.787689] usb 3-1: New USB device found, idVendor=058f, idProduct=6387 [ 5.788044] tegra_dtv_probe: probing dtv. [ 5.807639] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.807759] setup_stream: bufsize = 4096, bufnum = 4 [ 5.807760] ar0832_init: ++ [ 5.808172] otg state changed: SUSPEND --> PERIPHERAL [ 5.809425] i2c-core: driver [max77387] using legacy suspend method [ 5.809428] i2c-core: driver [max77387] using legacy resume method [ 5.809493] i2c-core: driver [as364x] using legacy suspend method [ 5.809496] i2c-core: driver [as364x] using legacy resume method [ 5.809701] [IMX135] sensor driver loading [ 5.809765] [IMX179] sensor driver loading [ 5.809828] [imx132] sensor driver loading [ 5.809891] [ar0261] sensor driver loading [ 5.810203] usbcore: registered new interface driver uvcvideo [ 5.810206] USB Video Class driver (1.1.1) [ 5.811223] zram: Created 1 device(s) ... [ 5.951264] usb 3-1: Product: Mass Storage Device [ 5.960472] usb 3-1: Manufacturer: JetFlash [ 5.969145] device-mapper: uevent: version 1.0.3 [ 5.969156] usb 3-1: SerialNumber: 8MW054ZS [ 5.987213] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 5.987722] usb-storage 3-1:1.0: USB Mass Storage device detected [ 6.011102] sdhci: Secure Digital Host Controller Interface driver [ 6.011159] scsi2 : usb-storage 3-1:1.0 [ 6.030169] sdhci: Copyright(c) Pierre Ossman [ 6.039033] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.049612] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 6.065256] sdhci-tegra sdhci-tegra.3: Speedo value 2367 [ 6.075250] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 6.089441] mmc0: no vqmmc regulator found [ 6.098254] mmc0: no vmmc regulator found [ 6.106937] mmc0: Invalid maximum block size, assuming 512 bytes [ 6.117647] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 6.151179] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 6.168875] sdhci-tegra sdhci-tegra.2: Speedo value 2367 [ 6.179085] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 6.193392] mmc1: no vqmmc regulator found [ 6.202500] mmc1: no vmmc regulator found [ 6.211480] mmc1: Invalid maximum block size, assuming 512 bytes [ 6.222494] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 6.258195] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 6.275847] gpio wake56 for gpio=170 [ 6.289012] tegra-se tegra12-se: tegra_se_probe: complete [ 6.290442] mmc0: BKOPS_EN bit is not set [ 6.295859] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data [ 6.295868] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found [ 6.333044] usbcore: registered new interface driver usbhid [ 6.343607] usbhid: USB HID core driver [ 6.352712] tegra-i2c tegra12-i2c.1: no acknowledge from address 0x3b [ 6.364315] i2c_hid 1-003b: unable to fetch the size of HID descriptor (ret=-121) [ 6.377157] tegra-i2c tegra12-i2c.1: no acknowledge from address 0x2c [ 6.388830] i2c_hid 1-002c: unable to fetch the size of HID descriptor (ret=-121) [ 6.401847] tegra-hier-ictlr tegra-hier-ictlr: probed [ 6.412540] usbcore: registered new interface driver snd-usb-audio [ 6.424579] max98090_i2c_probe [ 6.432979] MAX98090 driver registered [ 6.442711] tegra_offload_platform probe successfull. [ 6.450486] succefully registered offload opstegra30_avp_audio_platform_probe successful. [ 6.464456] tegra-snd-max98090 tegra-snd-max98090.5: tegra_max98090_driver_probe [ 6.482395] tegra-snd-max98090 tegra-snd-max98090.5: Platform data supplied via DT [ 6.495861] max98090 7-0010: max98090_probe [ 6.530861] max98090 7-0010: MAX98090 REVID=0x43 [ 6.540764] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 6.844649] **********Auto tuning windows************* [ 6.855345] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.866302] win[0]: 2(0) - 87(1) [ 6.874929] win[1]: 94(0) - 180(1) [ 6.883660] win[2]: 188(0) - 255(1) [ 6.892400] *************************************** [ 6.902564] ********tuning windows after inserting holes***** [ 6.906195] tegra-snd-max98090 tegra-snd-max98090.5: HiFi <-> tegra30-i2s.1 mapping ok [ 6.906413] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for I2S1_OUT [ 6.906421] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route I2S1_OUT -> direct -> HiFi Playback [ 6.906432] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for offload-pcm-playback [ 6.906439] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route offload-pcm-playback -> direct -> I2S1_OUT [ 6.906450] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for offload-compr-playback [ 6.906457] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route offload-compr-playback -> direct -> I2S1_OUT [ 6.908630] oprofile: using timer interrupt. [ 6.936211] max98090 7-0010: ***** max98090_interrupt ***** [ 7.013259] scsi 2:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 2 [ 7.014061] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.015083] sd 2:0:0:0: [sda] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB) [ 7.015434] sd 2:0:0:0: [sda] Write Protect is off [ 7.015443] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 7.015719] sd 2:0:0:0: [sda] No Caching mode page found [ 7.015727] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.017930] sd 2:0:0:0: [sda] No Caching mode page found [ 7.017936] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.131680] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.131783] GACT probability NOT on [ 7.131790] Mirror/redirect action on [ 7.131912] u32 classifier [ 7.131915] Actions configured [ 7.131921] Netfilter messages via NETLINK v0.30. [ 7.132123] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.199463] win[0]:2(0) - 50(2) [ 7.208037] win[1]:52(2) - 87(1) [ 7.208214] max98090 7-0010: active=0x04 mask=0x04 -> active=0x04 [ 7.208220] max98090 7-0010: M98090_IRQ_JDET_MASK [ 7.208576] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 7.208579] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 7.259640] sda: sda1 [ 7.261457] sd 2:0:0:0: [sda] No Caching mode page found [ 7.261463] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.261471] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 7.301120] win[2]:94(0) - 143(2) [ 7.301402] xt_time: kernel timezone is -0000 [ 7.301722] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.301876] arp_tables: (C) 2002 David S. Miller [ 7.301917] TCP: cubic registered [ 7.347085] win[3]:145(2) - 180(1) [ 7.355371] win[4]:188(0) - 236(2) [ 7.363591] win[5]:238(2) - 255(1) [ 7.371761] *********************************************** [ 7.382146] **********Tuning values********* [ 7.391176] **estimated values** [ 7.399154] NET: Registered protocol family 10 [ 7.399166] T2T_Vmax 54, T2T_Vmin 74, 1'st_hole_Vmax 50, UI_Vmax 92 [ 7.399168] **Calculated values** [ 7.399172] T2T_Vmax 53, 1'st_hole_Vmax 51, UI_Vmax 93 [ 7.399175] T2T_Vmin 53, 1'st_hole_Vmin 51, UI_Vmin 94 [ 7.399178] *********************************** [ 7.399184] ***********final tuning windows********** [ 7.399188] win[0]: 20 - 40 [ 7.399191] win[1]: 63 - 69 [ 7.399194] win[2]: 112 - 127 [ 7.399198] win[3]: 163 - 162 [ 7.399201] win[4]: 206 - 215 [ 7.399204] win[5]: 255 - 237 [ 7.399207] ******************************** [ 7.399213] best tap win - (20-40), best tap value 30 [ 7.399225] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 30 [ 7.402247] mmc0: new HS200 MMC card at address 0001 [ 7.403305] mmcblk mmc0:0001: Card claimed for testing. [ 7.404856] max98090 7-0010: No Headset Detected [ 7.432980] max98090 7-0010: ***** max98090_interrupt ***** [ 7.435949] max98090 7-0010: active=0x04 mask=0x04 -> active=0x04 [ 7.435955] max98090 7-0010: M98090_IRQ_JDET_MASK [ 7.469322] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 7.595894] max98090 7-0010: No Headset Detected [ 7.595917] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 7.630087] mmcblk0: mmc0:0001 SEM32G 29.1 GiB [ 7.639162] mmcblk0rpmb: mmc0:0001 SEM32G partition 3 4.00 MiB [ 7.649341] mip6: Mobile IPv6 [ 7.656688] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.661099] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 7.675493] sit: IPv6 over IPv4 tunneling driver [ 7.685368] NET: Registered protocol family 17 [ 7.694247] NET: Registered protocol family 15 [ 7.702895] NET: Registered protocol family 35 [ 7.711635] NET: Registered protocol family 37 [ 7.720266] NET: Registered protocol family 41 [ 7.730858] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 7.767419] Registering SWP/SWPB emulation handler [ 7.776201] last reset is due to power on reset [ 7.776201] [ 7.797478] Disabling clocks left on by bootloader: [ 7.806500] audio_2x [ 7.813329] audio [ 7.819388] audio4 [ 7.825503] audio3 [ 7.831595] audio2 [ 7.838113] audio1 [ 7.844148] audio0 [ 7.850238] entropy [ 7.856265] dsi2-fixed [ 7.862525] dsi1-fixed [ 7.868899] dsib [ 7.874570] trace [ 7.880235] bsev [ 7.885772] sdmmc4_ddr [ 7.891816] cclk_lp [ 7.898412] pll_x_out0 [ 7.904343] pll_u_12M [ 7.910173] pll_m_out1 [ 7.916172] tegra_dvfs: vdd_cpu connected to regulator [ 7.924643] tegra_dvfs: vdd_core connected to regulator [ 7.933199] tegra_dvfs: vdd_gpu connected to regulator [ 7.942399] tegra_dvfs: registered vdd_cpu simon notifier [ 7.951322] cpu_cold cooling device is registered [ 7.959462] cpu_hot cooling device is registered [ 7.959598] Tegra CPU DFLL is initialized with use_dfll = 1 [ 7.959669] CPU rate: 696 MHz [ 8.147243] tegra dvfs: tegra sysfs cap interface is initialized [ 8.156583] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 8.166364] tegra dvfs: registered vdd_gpu simon notifier [ 8.175428] tegra_actmon.emc: Completed initialization (0) [ 8.184378] tegra_actmon.avp: Completed initialization (0) [ 8.193206] tegra_mon.cpu_emc: Completed initialization (0) [ 8.205444] vpp-fuse: incomplete constraints, leaving on [ 8.214126] vdd-2v7-cam: incomplete constraints, leaving on [ 8.223048] avdd-spi: incomplete constraints, leaving on [ 8.231686] vdd-1v1-cam: incomplete constraints, leaving on [ 8.240649] vdd-1v2-cam: incomplete constraints, leaving on [ 8.249571] avdd-cam: incomplete constraints, leaving on [ 8.258265] as3722-sd3: incomplete constraints, leaving on [ 8.267946] of_get_named_gpio_flags exited with status 130 [ 8.267970] of_get_named_gpio_flags exited with status 69 [ 8.267993] of_get_named_gpio_flags exited with status 128 [ 8.268014] of_get_named_gpio_flags exited with status 135 [ 8.268033] of_get_named_gpio_flags exited with status 134 [ 8.268078] gpiod_set_debounce: gpio-130 status -22 [ 8.268189] gpiod_set_debounce: gpio-69 status -22 [ 8.268200] gpio wake23 for gpio=69 [ 8.275211] gpiod_set_debounce: gpio-128 status -22 [ 8.275224] gpio wake51 for gpio=128 [ 8.282322] gpiod_set_debounce: gpio-135 status -22 [ 8.282391] gpiod_set_debounce: gpio-134 status -22 [ 8.282615] input: gpio-keys.3 as /devices/platform/gpio-keys.3/input/input0 [ 8.293933] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01 00:00:12 UTC (946684812) [ 8.307006] ALSA device list: [ 8.311305] #0: tegra-max98090 [ 8.316531] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 8.326365] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 8.439971] EXT4-fs (mmcblk0p1): recovery complete [ 8.447024] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.456489] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 8.464247] devtmpfs: mounted [ 8.468712] Freeing unused kernel memory: 504K (c0b05000 - c0b83000) [ 8.578346] init: ureadahead main process (128) terminated with status 5 [ 8.805990] udevd[232]: starting version 175 [ 8.833371] Tegra cpuquiet clusterswitch enabled [ 8.975901] init: bluetooth main process (278) terminated with status 1 [ 8.975958] init: bluetooth main process ended, respawning [ 9.124513] init: bluetooth main process (340) terminated with status 1 [ 9.124582] init: bluetooth main process ended, respawning [ 9.164064] init: plymouth main process (129) killed by ABRT signal [ 9.166670] init: plymouth-splash main process (376) terminated with status 2 [ 9.229587] init: bluetooth main process (391) terminated with status 1 [ 9.229638] init: bluetooth main process ended, respawning [ 9.285442] init: bluetooth main process (435) terminated with status 1 [ 9.285493] init: bluetooth main process ended, respawning [ 9.343502] init: bluetooth main process (486) terminated with status 1 [ 9.343568] init: bluetooth main process ended, respawning [ 9.474945] init: alsa-restore main process (567) terminated with status 99 [ 9.520651] init: bluetooth main process (559) terminated with status 1 [ 9.520715] init: bluetooth main process ended, respawning [ 9.533822] init: plymouth-stop pre-start process (613) terminated with status 1 [ 9.601602] init: bluetooth main process (656) terminated with status 1 [ 9.601648] init: bluetooth main process ended, respawning [ 9.633360] init: bluetooth main process (678) terminated with status 1 [ 9.633406] init: bluetooth main process ended, respawning [ 9.662704] init: bluetooth main process (700) terminated with status 1 [ 9.662750] init: bluetooth main process ended, respawning [ 9.688332] init: bluetooth main process (724) terminated with status 1 [ 9.688382] init: bluetooth main process ended, respawning [ 9.713268] init: bluetooth main process (746) terminated with status 1 [ 9.713315] init: bluetooth respawning too fast, stopped [ 17.914421] gpio wake56 for gpio=170 [ 17.914426] Enabling wake56 ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ lspci 00:01.0 PCI bridge: NVIDIA Corporation Device 0e12 (rev a1) 01:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ sudo lspci -vvv 00:01.0 PCI bridge: NVIDIA Corporation Device 0e12 (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000ab71f000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range AB, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport 01:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: NEC Corporation uPD720200 USB 3.0 Host Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-