[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1404911451-9921-2-git-send-email-grygorii.strashko@ti.com>
Date: Wed, 9 Jul 2014 16:10:50 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
<santosh.shilimkar@...com>, <netdev@...r.kernel.org>
CC: <prabhakar.csengg@...il.com>, Sekhar Nori <nsekhar@...com>,
Rob Herring <robh+dt@...nel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<davinci-linux-open-source@...ux.davincidsp.com>,
Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH 1/2] net: davinci_mdio: reuse for keystone2 arch
The similar MDIO HW blocks is used by keystone 2 SoCs as
in Davinci SoCs:
- one in Gigabit Ethernet (GbE) Switch Subsystem
See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf
- one in 10 Gigabit Ethernet Subsystem
See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf
Hence, reuse Davinci MDIO driver for Keystone 2 and
enable TI networking for Keystone 2 devices
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
.../devicetree/bindings/net/davinci-mdio.txt | 8 ++++----
drivers/net/ethernet/ti/Kconfig | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
index 72efaaf..d2e68e7 100644
--- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
+++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
@@ -1,8 +1,8 @@
-TI SoC Davinci MDIO Controller Device Tree Bindings
+TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings
---------------------------------------------------
Required properties:
-- compatible : Should be "ti,davinci_mdio"
+- compatible : Should be "ti,davinci_mdio" or "ti,keystone-mdio"
- reg : physical base address and size of the davinci mdio
registers map
- bus_freq : Mdio Bus frequency
@@ -19,7 +19,7 @@ file.
Examples:
mdio: davinci_mdio@...01000 {
- compatible = "ti,cpsw";
+ compatible = "ti,davinci_mdio";
reg = <0x4A101000 0x1000>;
bus_freq = <1000000>;
};
@@ -27,7 +27,7 @@ Examples:
(or)
mdio: davinci_mdio@...01000 {
- compatible = "ti,cpsw";
+ compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
};
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 53150c2..1769700 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
- depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -32,7 +32,7 @@ config TI_DAVINCI_EMAC
config TI_DAVINCI_MDIO
tristate "TI DaVinci MDIO Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
select PHYLIB
---help---
This driver supports TI's DaVinci MDIO module.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists