ubuntu@tegra-ubuntu:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.33-g71c61a3-dirty (vidyas@vidyas-desktop) (gcc version 4.5.3 (crosstool-NG hg_unknown@20110628.165246) ) #133 SMP PREEMPT Tue Jul 8 10:15:07 IST 2014 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: laguna, model: NVIDIA Tegra124 Laguna, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found vpr, start=0xf6900000 size=9700000 [ 0.000000] Found tsec, start=0xf4900000 size=2000000<6>[ 0.000000] Found tegra_fbmem: 01f60000@ad012000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: ad012000 - aef71fff [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: eec00000 - efdfffff [ 0.000000] 2nd Framebuffer: efe00000 - f45fffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: f6900000 - ffffffff [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ac000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 453632 [ 0.000000] free_area_init_node: node 0, pgdat c0cbc940, node_mem_map c0e09000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2204 pages used for memmap [ 0.000000] HighMem zone: 259072 pages, LIFO batch:31 [ 0.000000] failed to read /chosen/proc-board/id [ 0.000000] failed to read /chosen/pmu-board/id [ 0.000000] DTS File Name: /home/vidyas/x/l4t-dev-kernel/kernel/arch/arm/boot/dts/tegra124-laguna.dts [ 0.000000] Tegra12: CPU Speedo value 2425, Soc Speedo value 2367, Gpu Speedo value 2194 [ 0.000000] Tegra12: CPU Speedo ID 0, Soc Speedo ID 0, Gpu Speedo ID 0 [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0 [ 0.000000] Tegra Revision: A01 SKU: 0x0 CPU Process: 0 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON [ 0.000000] tegra_clk_shared_bus_user_init: c3bus client tsec left ON [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000 [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000 [ 0.000000] Lowering se maximum rate from 600000000 to 480000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 648000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2014500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1220mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1cc2000 s14976 r8192 d13696 u36864 [ 0.000000] pcpu-alloc: s14976 r8192 d13696 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452112 [ 0.000000] Kernel command line: tegraid=40.1.1.0.0 mem=1862M@2048M memtype=0 vpr=151M@3945M tsec=32M@3913M otf_key=ad8aab2b74a0518e62e02f2807da88b5 ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=4 emc_max_dvfs=0 touch_id=0@540700518 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,3 console=tty1 sku_override=0 usbcore.old_scheme_first=1 lp0_vec=2064@0xf46ff000 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0167:0x0000:0x02:0x43:0x00 displayboard=0x3030:0x3a30:0x30:0x78:0x30 power_supply=Adapter audio_codec=rt5640 board_info=0x0167:0x0000:0x02:0x43:0x00 root=/dev/mmcblk0p1 rw rootwait tegraboot=sdmmc gpt gpt_sector=94207 modem_id=0 watchdog=disable android.kerneltype=normal [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1772MB = 1772MB total [ 0.000000] Memory: 1735468k/1735468k available, 171220k reserved, 1036288K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbe800000 - 0xbfe00000 ( 22 MB) [ 0.000000] .text : 0xc0008000 - 0xc0b04848 (11251 kB) [ 0.000000] .init : 0xc0b05000 - 0xc0b83a80 ( 507 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0cd4500 (1346 kB) [ 0.000000] .bss : 0xc0cd4500 - 0xc0d5d884 ( 549 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.003884] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.003954] pid_max: default: 32768 minimum: 301 [ 0.004275] Mount-cache hash table entries: 512 [ 0.026438] Initializing cgroup subsys debug [ 0.026482] Initializing cgroup subsys freezer [ 0.026590] CPU: Testing write buffer coherency: ok [ 0.026662] ftrace: allocating 32372 entries in 64 pages [ 0.068554] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.068598] Setting up static identity map for 0xc07f4460 - 0xc07f44f4 [ 0.072583] ftrace: Allocated trace_printk buffers [ 0.080292] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.083302] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.086353] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.086548] Brought up 4 CPUs [ 0.086612] SMP: Total of 4 processors activated. [ 0.086628] CPU: All CPU(s) started in SVC mode. [ 0.087497] devtmpfs: initialized [ 0.096813] pinctrl core: initialized pinctrl subsystem [ 0.097135] regulator-dummy: no parameters [ 0.097858] NET: Registered protocol family 16 [ 0.100367] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.100777] cpuidle: using governor ladder [ 0.100798] cpuidle: using governor menu [ 0.102111] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.103972] failed to read /chosen/display-board/id [ 0.106131] ardbeg_camera_auxdata: update camera lookup table. [ 0.113127] tegra124-pinctrl 70000868.pinmux: invalid group "spdif_in_pk6" for function "rsvd1" [ 0.115478] tegra124-pinctrl 70000868.pinmux: Probed Tegra pinctrl driver [ 0.116205] GPIO chip tegra-gpio: created GPIO range 0->250 ==> 70000868.pinmux PIN 0->250 [ 0.116255] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.116921] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.124283] Wake16 for irq=34 [ 0.131074] board_info: id:sku:fab:major:minor = 0x0167:0x0000:0x02:0x43:0x00 [ 0.131143] disp1 pclk=154700000 [ 0.131154] disp2 pclk=297000000 [ 0.131165] Selecting UARTD as the debug console [ 0.131212] The debug console clock name is uartd [ 0.131625] ardbeg_modem_init: modem_id = 0 [ 0.133817] Clear bootloader IO dpd settings [ 0.134011] Loading PM359 EMC tables. [ 0.134263] tegra: pll_m is selected as scalable EMC clock source [ 0.134287] tegra: selected pll_m scaling option but no backup source: [ 0.134306] removed not supported entries from the table: [ 0.134348] Lowering emc maximum rate from 1200000000 to 792000000 [ 0.134378] tegra: validated EMC DFS table [ 0.134460] laguna_edp_init: CPU regulator 15000 mA [ 0.379779] laguna_edp_init: GPU regulator 8000 mA [ 0.379815] swapper/0 isomgr_init(): iso emc max clk=792000KHz [ 0.379833] swapper/0 isomgr_init(): max_iso_bw=6336000KB<6>[ 0.380149] ardbeg_touch_init init raydium touch [ 0.380294] Raydium - touch platform_id : 8 [ 0.464055] platform tegradc.0: IOVA linear map 0xeec00000(1200000) [ 0.468273] platform tegradc.0: IOVA linear map 0xefe00000(4800000) [ 0.475908] platform tegradc.0: IOVA linear map 0xad012000(1f60000) [ 0.479184] platform tegradc.0: IOVA linear map 0xf6900000(9700000) [ 0.481419] platform tegradc.1: IOVA linear map 0xeec00000(1200000) [ 0.485626] platform tegradc.1: IOVA linear map 0xefe00000(4800000) [ 0.493257] platform tegradc.1: IOVA linear map 0xad012000(1f60000) [ 0.496543] platform tegradc.1: IOVA linear map 0xf6900000(9700000) [ 0.496784] soctherm THERMTRIP not supported on PMU (BOARD_P359) [ 0.497051] tegra11_soctherm_oc_int_init(): OC interrupts are not enabled [ 0.497281] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.497308] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.497609] MC mapped MMIO address: 0xfde19000 [ 0.497895] mc-err: Started MC error interface! [ 0.508337] bio: create slab at 0 [ 0.510176] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name [ 0.510211] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name [ 0.510239] of_get_named_gpio_flags: can't parse gpios property [ 0.510339] vdd-ac-bat: 8400 mV [ 0.510482] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name [ 0.510513] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name [ 0.510539] of_get_named_gpio_flags: can't parse gpios property [ 0.510636] vdd-3v3-aon: 3300 mV [ 0.510796] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name [ 0.510827] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name [ 0.510855] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name [ 0.510889] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name [ 0.510916] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name [ 0.510944] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name [ 0.510971] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name [ 0.510998] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name [ 0.511026] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name [ 0.511054] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name [ 0.511095] of_get_named_gpio_flags: can't parse gpios property [ 0.511216] reg-3v3-supply: 3300 mV [ 0.512839] vgaarb: loaded [ 0.513499] SCSI subsystem initialized [ 0.513684] libata version 3.00 loaded. [ 0.513872] usbcore: registered new interface driver usbfs [ 0.513936] usbcore: registered new interface driver hub [ 0.514050] usbcore: registered new device driver usb [ 0.514350] of_get_named_gpio_flags exited with status 20 [ 0.514368] of_get_named_gpio_flags exited with status 21 [ 0.515701] gpiochip_find_base: found new base at 1008 [ 0.515798] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca6416 [ 0.516253] of_get_named_gpio_flags exited with status 157 [ 0.516271] of_get_named_gpio_flags exited with status 158 [ 0.516791] of_get_named_gpio_flags exited with status 217 [ 0.516808] of_get_named_gpio_flags exited with status 218 [ 0.517092] of_get_named_gpio_flags exited with status 172 [ 0.517108] of_get_named_gpio_flags exited with status 173 [ 0.517411] of_get_named_gpio_flags exited with status 206 [ 0.517427] of_get_named_gpio_flags exited with status 207 [ 0.518737] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x05 [ 0.518764] as3722 4-0040: Device version 1V1 and platform version 1V2 [ 0.518786] as3722 4-0040: Final OTP version 1V2 [ 0.522947] gpiochip_find_base: found new base at 1000 [ 0.523044] gpiochip_add: registered GPIOs 1000 to 1007 on device: as3722-gpio [ 0.523075] GPIO chip as3722-gpio: created GPIO range 0->7 ==> as3722-pinctrl PIN 0->7 [ 0.523263] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523340] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523390] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523420] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.523448] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.523476] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.523530] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523559] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.523587] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.523615] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.523643] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.523671] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.523727] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523756] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.523785] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.523819] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.523848] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name [ 0.523876] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name [ 0.523905] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name [ 0.523956] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.523984] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.524035] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524063] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.524091] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.524119] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.524147] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.524175] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.524203] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.524232] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.524260] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.524328] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.524406] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.524435] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.524484] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524532] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524561] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.524612] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524682] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524711] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.524786] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.524815] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.524843] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.525756] vdd-cpu: 650 <--> 1300 mV at 1000 mV at 3500 mA [ 0.527039] vdd-core: 700 <--> 1350 mV at 1150 mV at 3500 mA [ 0.528020] vddio-ddr: at 1350 mV [ 0.528399] as3722-sd3: no parameters [ 0.528723] avdd-pll-pex: 1050 mV [ 0.529711] vdd-1v8: at 1800 mV [ 0.530074] vdd-gpu: applied init 1000000uV constraint [ 0.530914] vdd-gpu: 650 <--> 1200 mV at 1000 mV at 3500 mA [ 0.531292] avdd-pll: at 1050 mV at 300 mA [ 0.532550] vdd-cam: 1800 mV at 150 mA [ 0.533074] avdd-dsi-csi: at 1200 mV at 150 mA [ 0.534006] vdd-rtc: 800 mV at 150 mA [ 0.534534] avdd-cam: 2700 mV at 150 mA [ 0.535064] vdd-1v2-cam: 1200 mV at 150 mA [ 0.535460] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA [ 0.535997] vdd-1v1-cam: 1050 mV at 150 mA [ 0.536889] avdd-spi: 3300 mV at 150 mA [ 0.537418] vdd-2v7-cam: 2700 mV at 150 mA [ 0.537996] vpp-fuse: 1800 mV at 150 mA [ 0.538683] of_get_named_gpio_flags: can't parse gpios property [ 0.538694] of_get_named_gpio_flags: can't parse gpios property [ 0.539196] Linux video capture interface: v2.00 [ 0.540347] Advanced Linux Sound Architecture Driver Initialized. [ 0.541114] of_get_named_gpio_flags exited with status 108 [ 0.541242] usb0-vbus: 5000 mV [ 0.541433] of_get_named_gpio_flags exited with status 109 [ 0.541574] usb1-usb2-vbus: 5000 mV [ 0.541746] of_get_named_gpio_flags exited with status 86 [ 0.541871] vdd-hdmi: 5000 mV [ 0.542027] of_get_named_gpio_flags exited with status 63 [ 0.542134] avdd-hdmi-pll: 3300 mV [ 0.542188] avdd-hdmi-pll: supplied by avdd-pll-pex [ 0.542366] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name [ 0.542407] of_get_named_gpio_flags exited with status 122 [ 0.542509] vdd-lcd-bl: 3300 mV [ 0.542675] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name [ 0.542716] of_get_named_gpio_flags exited with status 58 [ 0.542828] vdd-lcd-bl-en: 5000 mV [ 0.542990] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name [ 0.543019] of_get_named_gpio_flags: can't parse gpios property [ 0.543131] reg-5v0-supply: 5000 mV [ 0.543300] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name [ 0.543331] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name [ 0.543360] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name [ 0.543405] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name [ 0.543434] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name [ 0.543462] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name [ 0.543490] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name [ 0.543518] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name [ 0.543564] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name [ 0.543622] of_get_named_gpio_flags: can't parse gpios property [ 0.543714] reg-1v8-supply: 1800 mV [ 0.544007] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name [ 0.544050] of_get_named_gpio_flags exited with status 1008 [ 0.544541] reg-dcdc-1v2: 1200 mV [ 0.544738] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name [ 0.544782] of_get_named_gpio_flags exited with status 1002 [ 0.545317] as3722-gpio2-supply: 3300 mV [ 0.545520] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name [ 0.545564] of_get_named_gpio_flags exited with status 1004 [ 0.546296] as3722-gpio4-supply: 3300 mV [ 0.546474] of_get_named_gpio_flags exited with status 136 [ 0.546605] sdmmc-en-supply: 3300 mV [ 0.546779] of_get_named_gpio_flags exited with status 1010 [ 0.547253] vdd-cdc-1v2-aud: 1200 mV [ 0.547415] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name [ 0.547448] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name [ 0.547477] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name [ 0.547503] of_get_named_gpio_flags: can't parse gpios property [ 0.547595] reg-aon-1v8: 1800 mV [ 0.547781] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name [ 0.547811] of_get_named_gpio_flags: can't parse gpios property [ 0.547906] reg-aon-1v2: 1200 mV [ 0.551212] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected [ 0.554807] tegra-pwr-detect power-detect.2: started io power detection dynamic control [ 0.554841] tegra-pwr-detect power-detect.2: NO_IO_POWER setting 0x0 package mask 0x1 [ 0.554974] Switching to clocksource arch_sys_counter [ 0.576659] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.576916] nvmap_page_pool_init: Total MB RAM: 1710 [ 0.576938] nvmap_page_pool_init: nvmap page pool size: 54720 pages (213 MB) [ 0.577341] nvmap_background_zero_allocator: PP alloc thread starting. [ 0.577517] iram: dma coherent mem declare 0x40001000,258048 [ 0.578514] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.578625] vpr: dma coherent mem declare 0xf6900000,158334976 [ 0.582319] misc nvmap: created heap vpr base 0xf6900000 size (154624KiB) [ 0.582479] nvmap:inner cache maint threshold=2097152 [ 0.593354] Wake39 for irq=52 [ 0.593466] tegra-otg tegra-otg: otg transceiver registered [ 0.593889] NET: Registered protocol family 2 [ 0.594677] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.594897] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.595125] TCP: Hash tables configured (established 8192 bind 8192) [ 0.595201] TCP: reno registered [ 0.595227] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.595283] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.595589] NET: Registered protocol family 1 [ 0.596057] RPC: Registered named UNIX socket transport module. [ 0.596084] RPC: Registered udp transport module. [ 0.596103] RPC: Registered tcp transport module. [ 0.596122] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.596148] PCI: CLS 0 bytes, default 64 [ 0.596515] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 0.602956] host1x host1x: initialized [ 0.604450] CPU PMU: probing PMU on CPU 0 [ 0.604490] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.605242] tegra_throttle : init passed [ 0.605349] Tegra cpuquiet initialized: disabled [ 0.605504] cpu-tegra: init EDP limit: 2014 MHz [ 0.606008] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.606572] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.606874] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.607574] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.609250] bounce pool size: 64 pages [ 0.610937] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.611306] NTFS driver 2.1.30 [Flags: R/O]. [ 0.611474] fuse init (API version 7.22) [ 0.611737] msgmni has been set to 1397 [ 0.613606] io scheduler noop registered (default) [ 0.614084] of_get_named_gpio_flags exited with status 113 [ 0.614107] of_get_named_gpio_flags exited with status 235 [ 0.614127] of_get_named_gpio_flags exited with status 1016 [ 0.614319] PCIE.C: tegra_pcie_enable_regulators : regulator hvdd_pex [ 0.614423] PCIE.C: tegra_pcie_enable_regulators : regulator pexio [ 0.615208] tegra-pcie 1003000.pcie-controller: acquiring hotplug_detect = 113 [ 0.616020] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 0.648589] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 1.051174] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.453195] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.855222] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 1.857279] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring [ 1.857477] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.857509] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.857536] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.857564] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.857587] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.857645] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 1.857734] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.857976] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.858222] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.858267] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit] [ 1.858433] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.860097] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.860146] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 1.860176] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.860221] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.860245] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.860275] PCI: enabling device 0000:00:01.0 (0140 -> 0143) [ 1.860319] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 1.860582] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.860609] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.860634] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.860753] aer 0000:00:01.0:pcie02: service driver aer loaded [ 1.860827] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 1.861583] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.861696] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.866302] tsec tsec: initialized [ 1.868198] isp isp.0: initialized [ 1.869212] isp isp.1: initialized [ 1.870859] falcon vic03.0: initialized [ 1.872132] falcon msenc: initialized [ 1.872949] tegradc tegradc.0: DSI: HS clock rate is 464500 [ 1.874424] p,wuxga-10-1 panel dt support not available [ 2.155592] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000 div:1.0 pclk:154500000 153153000~168623000 [ 2.244210] tegradc tegradc.0: DSI pad calibration done [ 2.251383] tegradc tegradc.0: probed [ 2.252121] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000 div:3.0 pclk:154500000 153132210~168600110 [ 2.274258] Console: switching to colour frame buffer device 240x75 [ 2.295623] tegradc tegradc.0: fb registered [ 2.301610] gpio wake4 for gpio=111 [ 2.301981] tegra-i2c tegra12-i2c.3: no acknowledge from address 0x50 [ 2.303137] tegradc tegradc.1: probed [ 2.304458] tegradc tegradc.1: fb registered [ 2.304572] hdmi_state_machine_worker (tid ebb03580): state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 2.304750] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 2.308236] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 2.309061] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.310484] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 2.346639] hdmi_state_machine_worker (tid ebb03580): state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 2.346643] hdmi_disable_l: audio_switch 0 [ 2.346646] hdmi_disable_l: hpd_switch 0 [ 2.346655] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug) [ 2.360103] hdmi_state_machine_worker (tid ebb03580): state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 2.360107] hdmi_disable_l: audio_switch 0 [ 2.360110] hdmi_disable_l: hpd_switch 0 [ 2.360117] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled) [ 4.634092] console [ttyS0] enabled [ 4.638634] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 4.646740] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 4.654876] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 4.668335] loop: module loaded [ 4.671859] nct1008_nct72 1-004c: success in enabling rail vdd_nct72 [ 4.687462] gpio wake35 for gpio=70 [ 4.691117] nct1008_nct72 1-004c: nct1008_probe: initialized [ 4.698086] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 4.709376] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 4.722154] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 4.729667] tegra-sata tegra-sata.0: version 1.0 [ 4.729793] of_get_named_gpio_flags exited with status 1017 [ 4.731216] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 4.740623] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 4.750568] scsi0 : tegra-sata [ 4.754056] scsi1 : tegra-sata [ 4.757392] ata1: SATA max UDMA/133 irq 55 [ 4.761605] ata2: DUMMY [ 4.766112] tun: Universal TUN/TAP device driver, 1.6 [ 4.771265] tun: (C) 1999-2004 Max Krasnyansky [ 4.777826] PPP generic driver version 2.4.2 [ 4.782382] PPP BSD Compression module registered [ 4.787183] PPP Deflate Compression module registered [ 4.792348] PPP MPPE Compression module registered [ 4.797241] NET: Registered protocol family 24 [ 4.801880] usbcore: registered new interface driver asix [ 4.807536] usbcore: registered new interface driver ax88179_178a [ 4.813851] usbcore: registered new interface driver cdc_ether [ 4.819840] usbcore: registered new interface driver smsc95xx [ 4.825738] usbcore: registered new interface driver cdc_subset [ 4.836868] usbcore: registered new interface driver cdc_ncm [ 4.847637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.859496] tegra USB phy - inst[1] platform info: [ 4.869340] port_otg: no [ 4.876858] has_hostpc: yes [ 4.884681] phy_interface: USB_PHY_INTF_UTMI [ 4.893920] op_mode: TEGRA_USB_OPMODE_HOST [ 4.902956] qc2_voltage: 0 [ 4.910608] hot_plug: disabled [ 4.918534] remote_wakeup: enabled [ 4.928312] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller [ 4.939151] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1 [ 4.951677] Wake40 for irq=53 [ 4.959441] Wake42 for irq=53 [ 4.967203] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000 [ 4.983072] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10 [ 4.993810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.005306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.017275] usb usb1: Product: Tegra EHCI Host Controller [ 5.027435] usb usb1: Manufacturer: Linux 3.10.33-g71c61a3-dirty ehci_hcd [ 5.039081] usb usb1: SerialNumber: tegra-ehci.1 [ 5.049007] hub 1-0:1.0: USB hub found [ 5.057618] hub 1-0:1.0: 1 port detected [ 5.066700] tegra USB phy - inst[2] platform info: [ 5.069102] ata1: SATA link down (SStatus 0 SControl 300) [ 5.086496] port_otg: no [ 5.093741] has_hostpc: yes [ 5.101199] phy_interface: USB_PHY_INTF_UTMI [ 5.110195] op_mode: TEGRA_USB_OPMODE_HOST [ 5.118922] qc2_voltage: 0 [ 5.126154] hot_plug: disabled [ 5.133716] remote_wakeup: enabled [ 5.143046] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller [ 5.153519] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2 [ 5.165708] Wake41 for irq=129 [ 5.173267] Wake43 for irq=129 [ 5.180819] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000 [ 5.197072] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10 [ 5.207431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.218557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.230134] usb usb2: Product: Tegra EHCI Host Controller [ 5.239828] usb usb2: Manufacturer: Linux 3.10.33-g71c61a3-dirty ehci_hcd [ 5.250926] usb usb2: SerialNumber: tegra-ehci.2 [ 5.260344] hub 2-0:1.0: USB hub found [ 5.268453] hub 2-0:1.0: 1 port detected [ 5.277008] ehci-pci: EHCI PCI platform driver [ 5.285823] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.295349] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 5.308372] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.319398] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.330941] usb usb3: Product: xHCI Host Controller [ 5.340046] usb usb3: Manufacturer: Linux 3.10.33-g71c61a3-dirty xhci_hcd [ 5.351079] usb usb3: SerialNumber: 0000:01:00.0 [ 5.360197] xHCI xhci_add_endpoint called for root hub [ 5.360206] xHCI xhci_check_bandwidth called for root hub [ 5.360334] hub 3-0:1.0: USB hub found [ 5.368195] hub 3-0:1.0: 2 ports detected [ 5.376664] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.386062] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4 [ 5.397817] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.408829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.420292] usb usb4: Product: xHCI Host Controller [ 5.429358] usb usb4: Manufacturer: Linux 3.10.33-g71c61a3-dirty xhci_hcd [ 5.440410] usb usb4: SerialNumber: 0000:01:00.0 [ 5.449570] xHCI xhci_add_endpoint called for root hub [ 5.449579] xHCI xhci_check_bandwidth called for root hub [ 5.449711] hub 4-0:1.0: USB hub found [ 5.457697] hub 4-0:1.0: 2 ports detected [ 5.474412] usbcore: registered new interface driver cdc_acm [ 5.484333] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.496749] usbcore: registered new interface driver cdc_wdm [ 5.506862] usbcore: registered new interface driver usb-storage [ 5.517373] usbcore: registered new interface driver usbserial [ 5.527616] usbcore: registered new interface driver option [ 5.537599] usbserial: USB Serial support registered for GSM modem (1-port) [ 5.549121] usbcore: registered new interface driver pl2303 [ 5.559120] usbserial: USB Serial support registered for pl2303 [ 5.569477] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 5.581619] tegra USB phy - inst[0] platform info: [ 5.590911] port_otg: yes [ 5.597999] has_hostpc: yes [ 5.605266] phy_interface: USB_PHY_INTF_UTMI [ 5.614039] op_mode: TEGRA_USB_OPMODE_DEVICE [ 5.622805] qc2_voltage: 0 [ 5.629969] vbus_pmu_irq: 0 [ 5.637177] charging: enabled [ 5.644503] remote_wakeup: disabled [ 5.655200] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 5.669780] usbcore: registered new interface driver xpad [ 5.682530] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 5.693785] as3722-rtc as3722-rtc.1: RTC interrupt 449 [ 5.706462] i2c /dev entries driver [ 5.717858] i2c i2c-0: Added multiplexed i2c bus 6 [ 5.727396] i2c i2c-0: Added multiplexed i2c bus 7 [ 5.737402] i2c i2c-0: Added multiplexed i2c bus 8 [ 5.746139] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 5.757813] i2c i2c-0: Added multiplexed i2c bus 9 [ 5.767061] pca954x 0-0070: registered 4 multiplexed busses for I2C switch pca9546 [ 5.779422] virtual_init [ 5.788497] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 5.799740] tegra_dtv_probe: probing dtv. [ 5.808362] usb 3-1: New USB device found, idVendor=058f, idProduct=6387 [ 5.808685] setup_stream: bufsize = 4096, bufnum = 4 [ 5.808686] ar0832_init: ++ [ 5.809146] i2c-core: driver [max77387] using legacy suspend method [ 5.809149] i2c-core: driver [max77387] using legacy resume method [ 5.809216] i2c-core: driver [as364x] using legacy suspend method [ 5.809219] i2c-core: driver [as364x] using legacy resume method [ 5.809431] [IMX135] sensor driver loading [ 5.809493] [IMX179] sensor driver loading [ 5.809554] [imx132] sensor driver loading [ 5.809621] [ar0261] sensor driver loading [ 5.809910] usbcore: registered new interface driver uvcvideo [ 5.809912] USB Video Class driver (1.1.1) [ 5.810886] zram: Created 1 device(s) ... [ 5.941224] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.941229] otg state changed: SUSPEND --> PERIPHERAL [ 5.962365] usb 3-1: Product: Mass Storage Device [ 5.971587] usb 3-1: Manufacturer: JetFlash [ 5.971599] device-mapper: uevent: version 1.0.3 [ 5.989357] usb 3-1: SerialNumber: 8MW054ZS [ 5.998238] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 6.011477] sdhci: Secure Digital Host Controller Interface driver [ 6.012083] usb-storage 3-1:1.0: USB Mass Storage device detected [ 6.032880] sdhci: Copyright(c) Pierre Ossman [ 6.041810] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.052209] scsi2 : usb-storage 3-1:1.0 [ 6.052501] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 6.052655] sdhci-tegra sdhci-tegra.3: Speedo value 2367 [ 6.052665] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 6.100386] mmc0: no vqmmc regulator found [ 6.109240] mmc0: no vmmc regulator found [ 6.117956] mmc0: Invalid maximum block size, assuming 512 bytes [ 6.128706] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 6.162075] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 6.180061] sdhci-tegra sdhci-tegra.2: Speedo value 2367 [ 6.191422] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100 [ 6.205619] mmc1: no vqmmc regulator found [ 6.214747] mmc1: no vmmc regulator found [ 6.223683] mmc1: Invalid maximum block size, assuming 512 bytes [ 6.235405] mmc0: BKOPS_EN bit is not set [ 6.240952] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data [ 6.240960] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found [ 6.234575] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 6.301094] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 6.319022] gpio wake56 for gpio=170 [ 6.330990] tegra-se tegra12-se: tegra_se_probe: complete [ 6.344255] usbcore: registered new interface driver usbhid [ 6.355002] usbhid: USB HID core driver [ 6.364374] tegra-i2c tegra12-i2c.1: no acknowledge from address 0x3b [ 6.376176] i2c_hid 1-003b: unable to fetch the size of HID descriptor (ret=-121) [ 6.389186] tegra-i2c tegra12-i2c.1: no acknowledge from address 0x2c [ 6.401075] i2c_hid 1-002c: unable to fetch the size of HID descriptor (ret=-121) [ 6.414380] tegra-hier-ictlr tegra-hier-ictlr: probed [ 6.425336] usbcore: registered new interface driver snd-usb-audio [ 6.437564] max98090_i2c_probe [ 6.446242] MAX98090 driver registered [ 6.456191] tegra_offload_platform probe successfull. [ 6.463987] succefully registered offload opstegra30_avp_audio_platform_probe successful. [ 6.478227] tegra-snd-max98090 tegra-snd-max98090.5: tegra_max98090_driver_probe [ 6.496622] tegra-snd-max98090 tegra-snd-max98090.5: Platform data supplied via DT [ 6.510358] max98090 7-0010: max98090_probe [ 6.545769] max98090 7-0010: MAX98090 REVID=0x43 [ 6.555862] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 6.793746] **********Auto tuning windows************* [ 6.804583] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.815711] win[0]: 2(0) - 87(1) [ 6.824539] win[1]: 95(0) - 180(1) [ 6.833477] win[2]: 189(0) - 255(1) [ 6.842451] *************************************** [ 6.852829] ********tuning windows after inserting holes***** [ 6.864081] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 6.875014] win[0]:2(0) - 50(2) [ 6.883593] win[1]:52(2) - 87(1) [ 6.892222] win[2]:95(0) - 143(2) [ 6.900940] win[3]:145(2) - 180(1) [ 6.909729] win[4]:189(0) - 236(2) [ 6.918448] win[5]:238(2) - 255(1) [ 6.927167] *********************************************** [ 6.929482] tegra-snd-max98090 tegra-snd-max98090.5: HiFi <-> tegra30-i2s.1 mapping ok [ 6.929700] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for I2S1_OUT [ 6.929708] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route I2S1_OUT -> direct -> HiFi Playback [ 6.929719] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for offload-pcm-playback [ 6.929726] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route offload-pcm-playback -> direct -> I2S1_OUT [ 6.929737] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: no source widget found for offload-compr-playback [ 6.929744] tegra-snd-max98090 tegra-snd-max98090.5: ASoC: Failed to add route offload-compr-playback -> direct -> I2S1_OUT [ 6.931643] oprofile: using timer interrupt. [ 6.959495] max98090 7-0010: ***** max98090_interrupt ***** [ 6.962465] max98090 7-0010: active=0x04 mask=0x04 -> active=0x04 [ 6.962471] max98090 7-0010: M98090_IRQ_JDET_MASK [ 7.087587] **********Tuning values********* [ 7.087616] GACT probability NOT on [ 7.087624] Mirror/redirect action on [ 7.087630] u32 classifier [ 7.087633] Actions configured [ 7.087639] Netfilter messages via NETLINK v0.30. [ 7.087708] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.120606] max98090 7-0010: No Headset Detected [ 7.148641] max98090 7-0010: ***** max98090_interrupt ***** [ 7.154015] max98090 7-0010: active=0x04 mask=0x04 -> active=0x04 [ 7.154021] max98090 7-0010: M98090_IRQ_JDET_MASK [ 7.184570] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 7.208050] **estimated values** [ 7.209604] scsi 2:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 2 [ 7.211054] sd 2:0:0:0: [sda] 7843840 512-byte logical blocks: (4.01 GB/3.74 GiB) [ 7.211323] sd 2:0:0:0: [sda] Write Protect is off [ 7.211332] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 7.211589] sd 2:0:0:0: [sda] No Caching mode page found [ 7.211595] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.212403] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.214177] sd 2:0:0:0: [sda] No Caching mode page found [ 7.214182] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.304856] T2T_Vmax 54, T2T_Vmin 74, 1'st_hole_Vmax 50, UI_Vmax 92 [ 7.305281] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 7.305285] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 7.313967] max98090 7-0010: No Headset Detected [ 7.313993] max98090 7-0010: max98090_dmic_switch state=1 left=1 right=1 [ 7.359222] **Calculated values** [ 7.359515] xt_time: kernel timezone is -0000 [ 7.359831] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.359990] arp_tables: (C) 2002 David S. Miller [ 7.360055] TCP: cubic registered [ 7.403619] T2T_Vmax 53, 1'st_hole_Vmax 51, UI_Vmax 93 [ 7.413397] T2T_Vmin 53, 1'st_hole_Vmin 51, UI_Vmin 94 [ 7.423100] *********************************** [ 7.432173] ***********final tuning windows********** [ 7.441736] win[0]: 20 - 40 [ 7.449026] NET: Registered protocol family 10 [ 7.449043] win[1]: 63 - 69 [ 7.449046] win[2]: 113 - 127 [ 7.449049] win[3]: 163 - 162 [ 7.449052] win[4]: 207 - 215 [ 7.449055] win[5]: 255 - 237 [ 7.449058] ******************************** [ 7.449062] best tap win - (20-40), best tap value 30 [ 7.449075] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 30 [ 7.526243] mmc0: new HS200 MMC card at address 0001 [ 7.532675] sda: sda1 [ 7.534588] sd 2:0:0:0: [sda] No Caching mode page found [ 7.534595] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 7.534604] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 7.572428] mmcblk mmc0:0001: Card claimed for testing. [ 7.582024] mip6: Mobile IPv6 [ 7.589391] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.589474] mmcblk0: mmc0:0001 SEM32G 29.1 GiB [ 7.589625] mmcblk0rpmb: mmc0:0001 SEM32G partition 3 4.00 MiB [ 7.618617] sit: IPv6 over IPv4 tunneling driver [ 7.628869] NET: Registered protocol family 17 [ 7.637903] NET: Registered protocol family 15 [ 7.646975] NET: Registered protocol family 35 [ 7.655918] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 7.656143] NET: Registered protocol family 37 [ 7.656147] NET: Registered protocol family 41 [ 7.684092] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 7.721055] Registering SWP/SWPB emulation handler [ 7.730204] last reset is due to power on reset [ 7.730204] [ 7.752580] Disabling clocks left on by bootloader: [ 7.761639] audio_2x [ 7.768271] audio [ 7.774634] audio4 [ 7.781040] audio3 [ 7.787350] audio2 [ 7.793653] audio1 [ 7.799913] audio0 [ 7.806332] entropy [ 7.812643] dsi2-fixed [ 7.819162] dsi1-fixed [ 7.825631] dsib [ 7.831544] trace [ 7.837493] bsev [ 7.843315] sdmmc4_ddr [ 7.849678] cclk_lp [ 7.855666] pll_x_out0 [ 7.862018] pll_u_12M [ 7.868055] pll_m_out1 [ 7.874256] tegra_dvfs: vdd_cpu connected to regulator [ 7.882947] tegra_dvfs: vdd_core connected to regulator [ 7.892603] tegra_dvfs: vdd_gpu connected to regulator [ 7.902008] tegra_dvfs: registered vdd_cpu simon notifier [ 7.911163] cpu_cold cooling device is registered [ 7.919511] cpu_hot cooling device is registered [ 7.919594] Tegra CPU DFLL is initialized with use_dfll = 1 [ 7.919663] CPU rate: 696 MHz [ 8.113101] tegra dvfs: tegra sysfs cap interface is initialized [ 8.122652] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 8.132714] tegra dvfs: registered vdd_gpu simon notifier [ 8.141928] tegra_actmon.emc: Completed initialization (0) [ 8.151137] tegra_actmon.avp: Completed initialization (0) [ 8.160205] tegra_mon.cpu_emc: Completed initialization (0) [ 8.172728] vpp-fuse: incomplete constraints, leaving on [ 8.181532] vdd-2v7-cam: incomplete constraints, leaving on [ 8.190606] avdd-spi: incomplete constraints, leaving on [ 8.199370] vdd-1v1-cam: incomplete constraints, leaving on [ 8.208456] vdd-1v2-cam: incomplete constraints, leaving on [ 8.217552] avdd-cam: incomplete constraints, leaving on [ 8.226377] as3722-sd3: incomplete constraints, leaving on [ 8.236180] of_get_named_gpio_flags exited with status 130 [ 8.236206] of_get_named_gpio_flags exited with status 69 [ 8.236228] of_get_named_gpio_flags exited with status 128 [ 8.236250] of_get_named_gpio_flags exited with status 135 [ 8.236270] of_get_named_gpio_flags exited with status 134 [ 8.236316] gpiod_set_debounce: gpio-130 status -22 [ 8.236401] gpiod_set_debounce: gpio-69 status -22 [ 8.236412] gpio wake23 for gpio=69 [ 8.243464] gpiod_set_debounce: gpio-128 status -22 [ 8.243477] gpio wake51 for gpio=128 [ 8.250642] gpiod_set_debounce: gpio-135 status -22 [ 8.250714] gpiod_set_debounce: gpio-134 status -22 [ 8.250944] input: gpio-keys.3 as /devices/platform/gpio-keys.3/input/input0 [ 8.262428] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01 00:00:12 UTC (946684812) [ 8.275521] ALSA device list: [ 8.279955] #0: tegra-max98090 [ 8.285116] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 8.295059] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 8.390889] EXT4-fs (mmcblk0p1): recovery complete [ 8.397939] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.407423] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 8.415197] devtmpfs: mounted [ 8.419668] Freeing unused kernel memory: 504K (c0b05000 - c0b83000) [ 8.528792] init: ureadahead main process (128) terminated with status 5 [ 8.750619] udevd[217]: starting version 175 [ 8.779328] Tegra cpuquiet clusterswitch enabled [ 8.972644] init: bluetooth main process (280) terminated with status 1 [ 8.972698] init: bluetooth main process ended, respawning [ 9.137606] init: bluetooth main process (359) terminated with status 1 [ 9.137668] init: bluetooth main process ended, respawning [ 9.186265] init: plymouth main process (129) killed by ABRT signal [ 9.187565] init: plymouth-splash main process (407) terminated with status 2 [ 9.217147] init: bluetooth main process (415) terminated with status 1 [ 9.217202] init: bluetooth main process ended, respawning [ 9.273547] init: bluetooth main process (465) terminated with status 1 [ 9.273601] init: bluetooth main process ended, respawning [ 9.324850] init: bluetooth main process (519) terminated with status 1 [ 9.324896] init: bluetooth main process ended, respawning [ 9.373370] init: alsa-restore main process (544) terminated with status 99 [ 9.426431] init: plymouth-stop pre-start process (569) terminated with status 1 [ 9.480285] init: bluetooth main process (607) terminated with status 1 [ 9.480338] init: bluetooth main process ended, respawning [ 9.552753] init: bluetooth main process (657) terminated with status 1 [ 9.552798] init: bluetooth main process ended, respawning [ 9.587647] init: bluetooth main process (679) terminated with status 1 [ 9.587695] init: bluetooth main process ended, respawning [ 9.615168] init: bluetooth main process (701) terminated with status 1 [ 9.615215] init: bluetooth main process ended, respawning [ 9.643471] init: bluetooth main process (725) terminated with status 1 [ 9.643518] init: bluetooth main process ended, respawning [ 9.669553] init: bluetooth main process (747) terminated with status 1 [ 9.669609] init: bluetooth respawning too fast, stopped [ 17.914300] gpio wake56 for gpio=170 [ 17.914307] Enabling wake56 [ 69.682676] tegra_simon_cpu_grading_cb: graded cpu: v = 900, t = 32000, grade = 0 ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ lspci 00:01.0 PCI bridge: NVIDIA Corporation Device 0e12 (rev a1) 01:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ ubuntu@tegra-ubuntu:~$ sudo lspci -vvv 00:01.0 PCI bridge: NVIDIA Corporation Device 0e12 (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000ab721000 Data: 0000 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 0.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range AB, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: pcieport 01:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: NEC Corporation uPD720200 USB 3.0 Host Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-