Message-ID: <1404977677-22248-4-git-send-email-acourbot@nvidia.com>
Date:	Thu, 10 Jul 2014 16:34:37 +0900
From:	Alexandre Courbot <acourbot@...dia.com>
To:	Ben Skeggs <bskeggs@...hat.com>
CC:	<nouveau@...ts.freedesktop.org>, <dri-devel@...ts.freedesktop.org>,
	<linux-tegra@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<gnurou@...il.com>, Alexandre Courbot <acourbot@...dia.com>
Subject: [PATCH 3/3] drm/gk20a: reclocking support

Add support for reclocking on GK20A, using a statically-defined pstates
table. The algorithms for calculating the coefficients and setting the
clocks are directly taken from the ChromeOS kernel.

Signed-off-by: Alexandre Courbot <acourbot@...dia.com>
---
 drivers/gpu/drm/nouveau/Makefile                   |   1 +
 drivers/gpu/drm/nouveau/core/engine/device/nve0.c  |   1 +
 .../gpu/drm/nouveau/core/include/subdev/clock.h    |   1 +
 drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c  | 670 +++++++++++++++++++++
 4 files changed, 673 insertions(+)
 create mode 100644 drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c

diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile
index a882ca0f3819..205d1ae7dd03 100644
--- a/drivers/gpu/drm/nouveau/Makefile
+++ b/drivers/gpu/drm/nouveau/Makefile
@@ -65,6 +65,7 @@ nouveau-y += core/subdev/clock/nva3.o
 nouveau-y += core/subdev/clock/nvaa.o
 nouveau-y += core/subdev/clock/nvc0.o
 nouveau-y += core/subdev/clock/nve0.o
+nouveau-y += core/subdev/clock/gk20a.o
 nouveau-y += core/subdev/clock/pllnv04.o
 nouveau-y += core/subdev/clock/pllnva3.o
 nouveau-y += core/subdev/devinit/base.o
diff --git a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c
index c75e9fc9b25f..a8b5184088b5 100644
--- a/drivers/gpu/drm/nouveau/core/engine/device/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/device/nve0.c
@@ -158,6 +158,7 @@ nve0_identify(struct nouveau_device *device)
 		break;
 	case 0xea:
 		device->cname = "GK20A";
+		device->oclass[NVDEV_SUBDEV_CLOCK  ] = &gk20a_clock_oclass;
 		device->oclass[NVDEV_SUBDEV_MC     ] =  nvc3_mc_oclass;
 		device->oclass[NVDEV_SUBDEV_BUS    ] =  nvc0_bus_oclass;
 		device->oclass[NVDEV_SUBDEV_TIMER  ] = &gk20a_timer_oclass;
diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
index c0fe191c9787..9fed2834f25e 100644
--- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
+++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
@@ -138,6 +138,7 @@ extern struct nouveau_oclass *nvaa_clock_oclass;
 extern struct nouveau_oclass nva3_clock_oclass;
 extern struct nouveau_oclass nvc0_clock_oclass;
 extern struct nouveau_oclass nve0_clock_oclass;
+extern struct nouveau_oclass gk20a_clock_oclass;
 
 int nv04_clock_pll_set(struct nouveau_clock *, u32 type, u32 freq);
 int nv04_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c b/drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c
new file mode 100644
index 000000000000..e175cfda0a48
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c
@@ -0,0 +1,670 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Shamelessly ripped off from ChromeOS's gk20a/clk_pllg.c
+ *
+ */
+
+#define MHZ (1000 * 1000)
+
+#define MASK(w)	((1 << w) - 1)
+
+#define SYS_GPCPLL_CFG_BASE			0x00137000
+#define GPC_BCASE_GPCPLL_CFG_BASE		0x00132800
+
+#define GPCPLL_CFG		(SYS_GPCPLL_CFG_BASE + 0)
+#define GPCPLL_CFG_ENABLE	BIT(0)
+#define GPCPLL_CFG_IDDQ		BIT(1)
+#define GPCPLL_CFG_LOCK_DET_OFF	BIT(4)
+#define GPCPLL_CFG_LOCK		BIT(17)
+
+#define GPCPLL_COEFF		(SYS_GPCPLL_CFG_BASE + 4)
+#define GPCPLL_COEFF_M_SHIFT	0
+#define GPCPLL_COEFF_M_WIDTH	8
+#define GPCPLL_COEFF_N_SHIFT	8
+#define GPCPLL_COEFF_N_WIDTH	8
+#define GPCPLL_COEFF_P_SHIFT	16
+#define GPCPLL_COEFF_P_WIDTH	6
+
+#define GPCPLL_CFG2			(SYS_GPCPLL_CFG_BASE + 0xc)
+#define GPCPLL_CFG2_SETUP2_SHIFT	16
+#define GPCPLL_CFG2_PLL_STEPA_SHIFT	24
+
+#define GPCPLL_CFG3			(SYS_GPCPLL_CFG_BASE + 0x18)
+#define GPCPLL_CFG3_PLL_STEPB_SHIFT	16
+
+#define GPCPLL_NDIV_SLOWDOWN			(SYS_GPCPLL_CFG_BASE + 0x1c)
+#define GPCPLL_NDIV_SLOWDOWN_NDIV_LO_SHIFT	0
+#define GPCPLL_NDIV_SLOWDOWN_NDIV_MID_SHIFT	8
+#define GPCPLL_NDIV_SLOWDOWN_STEP_SIZE_LO2MID_SHIFT	16
+#define GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT	22
+#define GPCPLL_NDIV_SLOWDOWN_EN_DYNRAMP_SHIFT	31
+
+#define SEL_VCO				(SYS_GPCPLL_CFG_BASE + 0x100)
+#define SEL_VCO_GPC2CLK_OUT_SHIFT	0
+
+#define GPC2CLK_OUT			(SYS_GPCPLL_CFG_BASE + 0x250)
+#define GPC2CLK_OUT_SDIV14_INDIV4_WIDTH	1
+#define GPC2CLK_OUT_SDIV14_INDIV4_SHIFT	31
+#define GPC2CLK_OUT_SDIV14_INDIV4_MODE	1
+#define GPC2CLK_OUT_VCODIV_WIDTH	6
+#define GPC2CLK_OUT_VCODIV_SHIFT	8
+#define GPC2CLK_OUT_VCODIV1		0
+#define GPC2CLK_OUT_VCODIV_MASK		(MASK(GPC2CLK_OUT_VCODIV_WIDTH) << \
+					GPC2CLK_OUT_VCODIV_SHIFT)
+#define	GPC2CLK_OUT_BYPDIV_WIDTH	6
+#define GPC2CLK_OUT_BYPDIV_SHIFT	0
+#define GPC2CLK_OUT_BYPDIV31		0x3c
+#define GPC2CLK_OUT_INIT_MASK	((MASK(GPC2CLK_OUT_SDIV14_INDIV4_WIDTH) << \
+		GPC2CLK_OUT_SDIV14_INDIV4_SHIFT)\
+		| (MASK(GPC2CLK_OUT_VCODIV_WIDTH) << GPC2CLK_OUT_VCODIV_SHIFT)\
+		| (MASK(GPC2CLK_OUT_BYPDIV_WIDTH) << GPC2CLK_OUT_BYPDIV_SHIFT))
+#define GPC2CLK_OUT_INIT_VAL	((GPC2CLK_OUT_SDIV14_INDIV4_MODE << \
+		GPC2CLK_OUT_SDIV14_INDIV4_SHIFT) \
+		| (GPC2CLK_OUT_VCODIV1 << GPC2CLK_OUT_VCODIV_SHIFT) \
+		| (GPC2CLK_OUT_BYPDIV31 << GPC2CLK_OUT_BYPDIV_SHIFT))
+
+#define GPC_BCAST_NDIV_SLOWDOWN_DEBUG	(GPC_BCASE_GPCPLL_CFG_BASE + 0xa0)
+#define GPC_BCAST_NDIV_SLOWDOWN_DEBUG_PLL_DYNRAMP_DONE_SYNCED_SHIFT	24
+#define GPC_BCAST_NDIV_SLOWDOWN_DEBUG_PLL_DYNRAMP_DONE_SYNCED_MASK \
+	    (0x1 << GPC_BCAST_NDIV_SLOWDOWN_DEBUG_PLL_DYNRAMP_DONE_SYNCED_SHIFT)
+
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <subdev/clock.h>
+#include <subdev/timer.h>
+
+#include <nouveau_platform.h>
+
+static const u8 pl_to_div[] = {
+/* PL:   0, 1, 2, 3, 4, 5, 6,  7,  8,  9, 10, 11, 12, 13, 14 */
+/* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32,
+};
+
+/* All frequencies in Mhz */
+struct gk20a_clk_pllg_params {
+	u32 min_freq, max_freq;
+	u32 min_vco, max_vco;
+	u32 min_u, max_u;
+	u32 min_m, max_m;
+	u32 min_n, max_n;
+	u32 min_pl, max_pl;
+};
+
+static const struct gk20a_clk_pllg_params gk20a_pllg_params = {
+	.min_freq = 144, .max_freq = 2064,
+	.min_vco = 1000, .max_vco = 2064,
+	.min_u = 12, .max_u = 38,
+	.min_m = 1, .max_m = 255,
+	.min_n = 8, .max_n = 255,
+	.min_pl = 1, .max_pl = 32,
+};
+
+struct gk20a_clock_priv {
+	struct nouveau_clock base;
+	const struct gk20a_clk_pllg_params *params;
+	u32 m, n, pl;
+	unsigned long parent_rate;
+};
+#define to_gk20a_clock(base) container_of(base, struct gk20a_clock_priv, base)
+
+static void
+gk20a_pllg_read_mnp(struct gk20a_clock_priv *priv)
+{
+	u32 val;
+
+	val = nv_rd32(priv, GPCPLL_COEFF);
+	priv->m = (val >> GPCPLL_COEFF_M_SHIFT) & MASK(GPCPLL_COEFF_M_WIDTH);
+	priv->n = (val >> GPCPLL_COEFF_N_SHIFT) & MASK(GPCPLL_COEFF_N_WIDTH);
+	priv->pl = (val >> GPCPLL_COEFF_P_SHIFT) & MASK(GPCPLL_COEFF_P_WIDTH);
+}
+
+static unsigned long
+gk20a_pllg_calc_rate(struct gk20a_clock_priv *priv)
+{
+	unsigned long rate;
+	unsigned long divider;
+
+	rate = priv->parent_rate * priv->n;
+	divider = priv->m * pl_to_div[priv->pl];
+	do_div(rate, divider);
+
+	return rate / 2;
+}
+
+static int
+gk20a_pllg_calc_mnp(struct gk20a_clock_priv *priv, unsigned long rate)
+{
+	unsigned int target_clk_f, ref_clk_f, target_freq;
+	unsigned int min_vco_f, max_vco_f;
+	u32 low_pl, high_pl, best_pl;
+	unsigned int target_vco_f, vco_f;
+	u32 best_m, best_n;
+	unsigned int u_f;
+	u32 m, n, n2;
+	u32 delta, lwv, best_delta = ~0;
+	int pl;
+
+	target_clk_f = rate * 2 / MHZ;
+	ref_clk_f = priv->parent_rate / MHZ;
+
+	max_vco_f = priv->params->max_vco;
+	min_vco_f = priv->params->min_vco;
+	best_m = priv->params->max_m;
+	best_n = priv->params->min_n;
+	best_pl = priv->params->min_pl;
+
+	target_vco_f = target_clk_f + target_clk_f / 50;
+	if (max_vco_f < target_vco_f)
+		max_vco_f = target_vco_f;
+
+	/* min_pl <= high_pl <= max_pl */
+	high_pl = (max_vco_f + target_vco_f - 1) / target_vco_f;
+	high_pl = min(high_pl, priv->params->max_pl);
+	high_pl = max(high_pl, priv->params->min_pl);
+
+	/* min_pl <= low_pl <= max_pl */
+	low_pl = min_vco_f / target_vco_f;
+	low_pl = min(low_pl, priv->params->max_pl);
+	low_pl = max(low_pl, priv->params->min_pl);
+
+	/* Find Indices of high_pl and low_pl */
+	for (pl = 0; pl < ARRAY_SIZE(pl_to_div) - 1; pl++) {
+		if (pl_to_div[pl] >= low_pl) {
+			low_pl = pl;
+			break;
+		}
+	}
+	for (pl = 0; pl < ARRAY_SIZE(pl_to_div) - 1; pl++) {
+		if (pl_to_div[pl] >= high_pl) {
+			high_pl = pl;
+			break;
+		}
+	}
+
+	/* Select lowest possible VCO */
+	for (pl = low_pl; pl <= high_pl; pl++) {
+		target_vco_f = target_clk_f * pl_to_div[pl];
+		for (m = priv->params->min_m; m <= priv->params->max_m; m++) {
+			u_f = ref_clk_f / m;
+
+			if (u_f < priv->params->min_u)
+				break;
+			if (u_f > priv->params->max_u)
+				continue;
+
+			n = (target_vco_f * m) / ref_clk_f;
+			n2 = ((target_vco_f * m) + (ref_clk_f - 1)) / ref_clk_f;
+
+			if (n > priv->params->max_n)
+				break;
+
+			for (; n <= n2; n++) {
+				if (n < priv->params->min_n)
+					continue;
+				if (n > priv->params->max_n)
+					break;
+
+				vco_f = ref_clk_f * n / m;
+
+				if (vco_f >= min_vco_f && vco_f <= max_vco_f) {
+					lwv = (vco_f + (pl_to_div[pl] / 2))
+						/ pl_to_div[pl];
+					delta = abs(lwv - target_clk_f);
+
+					if (delta < best_delta) {
+						best_delta = delta;
+						best_m = m;
+						best_n = n;
+						best_pl = pl;
+
+						if (best_delta == 0)
+							goto found_match;
+					}
+				}
+			}
+		}
+	}
+
+found_match:
+	WARN_ON(best_delta == ~0);
+
+	if (best_delta != 0)
+		nv_debug(priv, "no best match for target @ %dMHz on gpc_pll",
+			 target_clk_f);
+
+	priv->m = best_m;
+	priv->n = best_n;
+	priv->pl = best_pl;
+
+	target_freq = gk20a_pllg_calc_rate(priv) / MHZ;
+
+	nv_debug(priv, "actual target freq %d MHz, M %d, N %d, PL %d(div%d)\n",
+		 target_freq, priv->m, priv->n, priv->pl, pl_to_div[priv->pl]);
+
+	return 0;
+}
+
+static int
+gk20a_pllg_slide(struct gk20a_clock_priv *priv, u32 n)
+{
+	u32 val;
+	int ramp_timeout;
+
+	/* get old coefficients */
+	val = nv_rd32(priv, GPCPLL_COEFF);
+	/* do nothing if NDIV is the same */
+	if (n == ((val >> GPCPLL_COEFF_N_SHIFT) & MASK(GPCPLL_COEFF_N_WIDTH)))
+		return 0;
+
+	/* setup */
+	nv_mask(priv, GPCPLL_CFG2, 0xff << GPCPLL_CFG2_PLL_STEPA_SHIFT,
+		0x2b << GPCPLL_CFG2_PLL_STEPA_SHIFT);
+	nv_mask(priv, GPCPLL_CFG3, 0xff << GPCPLL_CFG3_PLL_STEPB_SHIFT,
+		0xb << GPCPLL_CFG3_PLL_STEPB_SHIFT);
+
+	/* pll slowdown mode */
+	nv_mask(priv, GPCPLL_NDIV_SLOWDOWN,
+		BIT(GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT),
+		BIT(GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT));
+
+	/* new ndiv ready for ramp */
+	val = nv_rd32(priv, GPCPLL_COEFF);
+	val &= ~(MASK(GPCPLL_COEFF_N_WIDTH) << GPCPLL_COEFF_N_SHIFT);
+	val |= (n & MASK(GPCPLL_COEFF_N_WIDTH)) << GPCPLL_COEFF_N_SHIFT;
+	udelay(1);
+	nv_wr32(priv, GPCPLL_COEFF, val);
+
+	/* dynamic ramp to new ndiv */
+	val = nv_rd32(priv, GPCPLL_NDIV_SLOWDOWN);
+	val |= 0x1 << GPCPLL_NDIV_SLOWDOWN_EN_DYNRAMP_SHIFT;
+	udelay(1);
+	nv_wr32(priv, GPCPLL_NDIV_SLOWDOWN, val);
+
+	for (ramp_timeout = 500; ramp_timeout > 0; ramp_timeout--) {
+		udelay(1);
+		val = nv_rd32(priv, GPC_BCAST_NDIV_SLOWDOWN_DEBUG);
+		if (val & GPC_BCAST_NDIV_SLOWDOWN_DEBUG_PLL_DYNRAMP_DONE_SYNCED_MASK)
+			break;
+	}
+
+	/* exit slowdown mode */
+	nv_mask(priv, GPCPLL_NDIV_SLOWDOWN,
+		BIT(GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT) |
+		BIT(GPCPLL_NDIV_SLOWDOWN_EN_DYNRAMP_SHIFT), 0);
+	nv_rd32(priv, GPCPLL_NDIV_SLOWDOWN);
+
+	if (ramp_timeout <= 0) {
+		nv_error(priv, "gpcpll dynamic ramp timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void
+_gk20a_pllg_enable(struct gk20a_clock_priv *priv)
+{
+	nv_mask(priv, GPCPLL_CFG, GPCPLL_CFG_ENABLE, GPCPLL_CFG_ENABLE);
+	nv_rd32(priv, GPCPLL_CFG);
+}
+
+static void
+_gk20a_pllg_disable(struct gk20a_clock_priv *priv)
+{
+	nv_mask(priv, GPCPLL_CFG, GPCPLL_CFG_ENABLE, 0);
+	nv_rd32(priv, GPCPLL_CFG);
+}
+
+static int
+_gk20a_pllg_program_mnp(struct gk20a_clock_priv *priv, bool allow_slide)
+{
+	u32 val, cfg;
+	u32 m_old, pl_old, n_lo;
+
+	/* get old coefficients */
+	val = nv_rd32(priv, GPCPLL_COEFF);
+	m_old = (val >> GPCPLL_COEFF_M_SHIFT) & MASK(GPCPLL_COEFF_M_WIDTH);
+	pl_old = (val >> GPCPLL_COEFF_P_SHIFT) & MASK(GPCPLL_COEFF_P_WIDTH);
+
+	/* do NDIV slide if there is no change in M and PL */
+	cfg = nv_rd32(priv, GPCPLL_CFG);
+	if (allow_slide && priv->m == m_old && priv->pl == pl_old &&
+	    (cfg & GPCPLL_CFG_ENABLE)) {
+		return gk20a_pllg_slide(priv, priv->n);
+	}
+
+	/* slide down to NDIV_LO */
+	n_lo = DIV_ROUND_UP(m_old * priv->params->min_vco,
+			    priv->parent_rate / MHZ);
+	if (allow_slide && (cfg & GPCPLL_CFG_ENABLE)) {
+		int ret = gk20a_pllg_slide(priv, n_lo);
+
+		if (ret)
+			return ret;
+	}
+
+	/* split FO-to-bypass jump in halfs by setting out divider 1:2 */
+	nv_mask(priv, GPC2CLK_OUT, GPC2CLK_OUT_VCODIV_MASK,
+		0x2 << GPC2CLK_OUT_VCODIV_SHIFT);
+
+	/* put PLL in bypass before programming it */
+	val = nv_rd32(priv, SEL_VCO);
+	val &= ~(BIT(SEL_VCO_GPC2CLK_OUT_SHIFT));
+	udelay(2);
+	nv_wr32(priv, SEL_VCO, val);
+
+	/* get out from IDDQ */
+	val = nv_rd32(priv, GPCPLL_CFG);
+	if (val & GPCPLL_CFG_IDDQ) {
+		val &= ~GPCPLL_CFG_IDDQ;
+		nv_wr32(priv, GPCPLL_CFG, val);
+		nv_rd32(priv, GPCPLL_CFG);
+		udelay(2);
+	}
+
+	_gk20a_pllg_disable(priv);
+
+	nv_debug(priv, "%s: m=%d n=%d pl=%d\n", __func__, priv->m, priv->n,
+		 priv->pl);
+
+	n_lo = DIV_ROUND_UP(priv->m * priv->params->min_vco,
+			    priv->parent_rate / MHZ);
+	val = priv->m << GPCPLL_COEFF_M_SHIFT;
+	val |= (allow_slide ? n_lo : priv->n) << GPCPLL_COEFF_N_SHIFT;
+	val |= priv->pl << GPCPLL_COEFF_P_SHIFT;
+	nv_wr32(priv, GPCPLL_COEFF, val);
+
+	_gk20a_pllg_enable(priv);
+
+	val = nv_rd32(priv, GPCPLL_CFG);
+	if (val & GPCPLL_CFG_LOCK_DET_OFF) {
+		val &= ~GPCPLL_CFG_LOCK_DET_OFF;
+		nv_wr32(priv, GPCPLL_CFG, val);
+	}
+
+	if (!nouveau_timer_wait_eq(priv, 300000, GPCPLL_CFG, GPCPLL_CFG_LOCK,
+				   GPCPLL_CFG_LOCK)) {
+		nv_error(priv, "%s: timeout waiting for pllg lock\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	/* switch to VCO mode */
+	nv_mask(priv, SEL_VCO, 0, BIT(SEL_VCO_GPC2CLK_OUT_SHIFT));
+
+	/* restore out divider 1:1 */
+	val = nv_rd32(priv, GPC2CLK_OUT);
+	val &= ~GPC2CLK_OUT_VCODIV_MASK;
+	udelay(2);
+	nv_wr32(priv, GPC2CLK_OUT, val);
+
+	/* slide up to new NDIV */
+	return allow_slide ? gk20a_pllg_slide(priv, priv->n) : 0;
+}
+
+static int
+gk20a_pllg_program_mnp(struct gk20a_clock_priv *priv)
+{
+	int err;
+
+	err = _gk20a_pllg_program_mnp(priv, true);
+	if (err)
+		err = _gk20a_pllg_program_mnp(priv, false);
+
+	return err;
+}
+
+static void
+gk20a_pllg_disable(struct gk20a_clock_priv *priv)
+{
+	u32 val;
+
+	/* slide to VCO min */
+	val = nv_rd32(priv, GPCPLL_CFG);
+	if (val & GPCPLL_CFG_ENABLE) {
+		u32 coeff, m, n_lo;
+
+		coeff = nv_rd32(priv, GPCPLL_COEFF);
+		m = (coeff >> GPCPLL_COEFF_M_SHIFT) & MASK(GPCPLL_COEFF_M_WIDTH);
+		n_lo = DIV_ROUND_UP(m * priv->params->min_vco,
+				    priv->parent_rate / MHZ);
+		gk20a_pllg_slide(priv, n_lo);
+	}
+
+	/* put PLL in bypass before disabling it */
+	nv_mask(priv, SEL_VCO, BIT(SEL_VCO_GPC2CLK_OUT_SHIFT), 0);
+
+	_gk20a_pllg_disable(priv);
+}
+
+#define GK20A_CLK_GPC_MDIV 1000
+
+static struct nouveau_clocks
+gk20a_domains[] = {
+	{ nv_clk_src_crystal, 0xff },
+	{ nv_clk_src_gpc, 0xff, 0, "core", GK20A_CLK_GPC_MDIV },
+	{ nv_clk_src_max }
+};
+
+static struct nouveau_pstate
+gk20a_pstates[] = {
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 72000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 108000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 180000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 252000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 324000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 396000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 468000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 540000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 612000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 648000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 684000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 708000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 756000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 804000,
+		},
+	},
+	{
+		.base = {
+			.domain[nv_clk_src_gpc] = 852000,
+		},
+	},
+};
+
+static int
+gk20a_clock_read(struct nouveau_clock *clk, enum nv_clk_src src)
+{
+	struct gk20a_clock_priv *priv = (void *)clk;
+
+	switch (src) {
+	case nv_clk_src_crystal:
+		return nv_device(clk)->crystal;
+	case nv_clk_src_gpc:
+		gk20a_pllg_read_mnp(priv);
+		return gk20a_pllg_calc_rate(priv) / GK20A_CLK_GPC_MDIV;
+	default:
+		nv_error(clk, "invalid clock source %d\n", src);
+		return -EINVAL;
+	}
+}
+
+static int
+gk20a_clock_calc(struct nouveau_clock *clk, struct nouveau_cstate *cstate)
+{
+	struct gk20a_clock_priv *priv = (void *)clk;
+
+	return gk20a_pllg_calc_mnp(priv, cstate->domain[nv_clk_src_gpc] *
+					 GK20A_CLK_GPC_MDIV);
+}
+
+static int
+gk20a_clock_prog(struct nouveau_clock *clk)
+{
+	struct gk20a_clock_priv *priv = (void *)clk;
+
+	return gk20a_pllg_program_mnp(priv);
+}
+
+static void
+gk20a_clock_tidy(struct nouveau_clock *clk)
+{
+}
+
+static int
+gk20a_clock_fini(struct nouveau_object *object, bool suspend)
+{
+	struct gk20a_clock_priv *priv = (void *)object;
+	int ret;
+
+	ret = nouveau_clock_fini(&priv->base, false);
+
+	gk20a_pllg_disable(priv);
+
+	return ret;
+}
+
+static int
+gk20a_clock_init(struct nouveau_object *object)
+{
+	struct gk20a_clock_priv *priv = (void *)object;
+	int ret;
+
+	nv_mask(priv, GPC2CLK_OUT, GPC2CLK_OUT_INIT_MASK, GPC2CLK_OUT_INIT_VAL);
+
+	ret = gk20a_clock_calc(&priv->base, &gk20a_pstates[0].base);
+	if (ret) {
+		nv_error(priv, "cannot compute clock parameters\n");
+		return ret;
+	}
+
+	ret = gk20a_clock_prog(&priv->base);
+	if (ret) {
+		nv_error(priv, "cannot initialize PLLG\n");
+		return ret;
+	}
+
+	nouveau_clock_init(&priv->base);
+
+	return 0;
+}
+
+static int
+gk20a_clock_ctor(struct nouveau_object *parent,  struct nouveau_object *engine,
+		 struct nouveau_oclass *oclass, void *data, u32 size,
+		 struct nouveau_object **pobject)
+{
+	struct gk20a_clock_priv *priv;
+	struct nouveau_platform_device *plat;
+	int ret;
+	int i;
+
+	/* Finish initializing the pstates */
+	for (i = 0; i < ARRAY_SIZE(gk20a_pstates); i++) {
+		INIT_LIST_HEAD(&gk20a_pstates[i].list);
+		gk20a_pstates[i].pstate = i + 1;
+	}
+
+	ret = nouveau_clock_create(parent, engine, oclass, gk20a_domains,
+			gk20a_pstates, ARRAY_SIZE(gk20a_pstates), true, &priv);
+	*pobject = nv_object(priv);
+	if (ret)
+		return ret;
+
+	priv->params = &gk20a_pllg_params;
+
+	plat = nv_device_to_platform(nv_device(parent));
+	priv->parent_rate = clk_get_rate(plat->gpu->clk);
+	nv_info(priv, "parent clock rate: %ld Mhz\n", priv->parent_rate / MHZ);
+
+	priv->base.read = gk20a_clock_read;
+	priv->base.calc = gk20a_clock_calc;
+	priv->base.prog = gk20a_clock_prog;
+	priv->base.tidy = gk20a_clock_tidy;
+
+	return 0;
+}
+
+struct nouveau_oclass
+gk20a_clock_oclass = {
+	.handle = NV_SUBDEV(CLOCK, 0xea),
+	.ofuncs = &(struct nouveau_ofuncs) {
+		.ctor = gk20a_clock_ctor,
+		.dtor = _nouveau_subdev_dtor,
+		.init = gk20a_clock_init,
+		.fini = gk20a_clock_fini,
+	},
+};
-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists