| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADGdYn6_dAW0=8n2=KHt0-LE4EEwiyHsfTri8RYo_yUuq153mg@mail.gmail.com>
Date: Thu, 10 Jul 2014 15:40:18 +0530
From: amit daniel kachhap <amit.daniel@...sung.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: Sangbeom Kim <sbkim73@...sung.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] regulator: s2mpa01: Optimize the regulator
description macro
On Thu, Jul 10, 2014 at 1:05 PM, Lee Jones <lee.jones@...aro.org> wrote:
> On Thu, 10 Jul 2014, amit daniel kachhap wrote:
>> Adding MFD maintainers.
>
> Why, what for?
Sorry not needed for this patch.
>
>> On Tue, Jul 8, 2014 at 5:57 PM, Amit Daniel Kachhap
>> <amit.daniel@...sung.com> wrote:
>> > This patch makes the regulator description macro take minimum and
>> > steps voltage as parameter. In this way many repeated macros can be
>> > removed. Now these macros are repeated only if the the LDO/BUCK ctrl
>> > registers have non-linear positions. The good thing is these ctrl registers
>> > are mostly linear so they are not passed as parameters.
>> >
>> > This patch reduces the code size and also allow easy addition of more
>> > s2mpxxx PMIC drivers which differs a lot in minimum/step voltages.
>> >
>> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
>> > ---
>> > drivers/regulator/s2mpa01.c | 136 ++++++++++++--------------------------------
>> > 1 file changed, 37 insertions(+), 99 deletions(-)
>> >
>> > diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
>> > index 962c5f1..8073466 100644
>> > --- a/drivers/regulator/s2mpa01.c
>> > +++ b/drivers/regulator/s2mpa01.c
>> > @@ -235,28 +235,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
>> > .set_ramp_delay = s2mpa01_set_ramp_delay,
>> > };
>> >
>> > -#define regulator_desc_ldo1(num) { \
>> > +#define regulator_desc_ldo(num, min, step) { \
>> > .name = "LDO"#num, \
>> > .id = S2MPA01_LDO##num, \
>> > .ops = &s2mpa01_ldo_ops, \
>> > .type = REGULATOR_VOLTAGE, \
>> > .owner = THIS_MODULE, \
>> > - .min_uV = MIN_800_MV, \
>> > - .uV_step = STEP_50_MV, \
>> > - .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
>> > - .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
>> > - .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
>> > - .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
>> > - .enable_mask = S2MPA01_ENABLE_MASK \
>> > -}
>> > -#define regulator_desc_ldo2(num) { \
>> > - .name = "LDO"#num, \
>> > - .id = S2MPA01_LDO##num, \
>> > - .ops = &s2mpa01_ldo_ops, \
>> > - .type = REGULATOR_VOLTAGE, \
>> > - .owner = THIS_MODULE, \
>> > - .min_uV = MIN_800_MV, \
>> > - .uV_step = STEP_25_MV, \
>> > + .min_uV = min, \
>> > + .uV_step = step, \
>> > .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
>> > .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
>> > .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
>> > @@ -296,14 +282,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
>> > .enable_mask = S2MPA01_ENABLE_MASK \
>> > }
>> >
>> > -#define regulator_desc_buck6_7(num) { \
>> > +#define regulator_desc_buck6_10(num, min, step) { \
>> > .name = "BUCK"#num, \
>> > .id = S2MPA01_BUCK##num, \
>> > .ops = &s2mpa01_buck_ops, \
>> > .type = REGULATOR_VOLTAGE, \
>> > .owner = THIS_MODULE, \
>> > - .min_uV = MIN_600_MV, \
>> > - .uV_step = STEP_6_25_MV, \
>> > + .min_uV = min, \
>> > + .uV_step = step, \
>> > .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
>> > .ramp_delay = S2MPA01_RAMP_DELAY, \
>> > .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
>> > @@ -312,91 +298,43 @@ static struct regulator_ops s2mpa01_buck_ops = {
>> > .enable_mask = S2MPA01_ENABLE_MASK \
>> > }
>> >
>> > -#define regulator_desc_buck8 { \
>> > - .name = "BUCK8", \
>> > - .id = S2MPA01_BUCK8, \
>> > - .ops = &s2mpa01_buck_ops, \
>> > - .type = REGULATOR_VOLTAGE, \
>> > - .owner = THIS_MODULE, \
>> > - .min_uV = MIN_800_MV, \
>> > - .uV_step = STEP_12_5_MV, \
>> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
>> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
>> > - .vsel_reg = S2MPA01_REG_B8CTRL2, \
>> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
>> > - .enable_reg = S2MPA01_REG_B8CTRL1, \
>> > - .enable_mask = S2MPA01_ENABLE_MASK \
>> > -}
>> > -
>> > -#define regulator_desc_buck9 { \
>> > - .name = "BUCK9", \
>> > - .id = S2MPA01_BUCK9, \
>> > - .ops = &s2mpa01_buck_ops, \
>> > - .type = REGULATOR_VOLTAGE, \
>> > - .owner = THIS_MODULE, \
>> > - .min_uV = MIN_1500_MV, \
>> > - .uV_step = STEP_12_5_MV, \
>> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
>> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
>> > - .vsel_reg = S2MPA01_REG_B9CTRL2, \
>> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
>> > - .enable_reg = S2MPA01_REG_B9CTRL1, \
>> > - .enable_mask = S2MPA01_ENABLE_MASK \
>> > -}
>> > -
>> > -#define regulator_desc_buck10 { \
>> > - .name = "BUCK10", \
>> > - .id = S2MPA01_BUCK10, \
>> > - .ops = &s2mpa01_buck_ops, \
>> > - .type = REGULATOR_VOLTAGE, \
>> > - .owner = THIS_MODULE, \
>> > - .min_uV = MIN_1000_MV, \
>> > - .uV_step = STEP_12_5_MV, \
>> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
>> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
>> > - .vsel_reg = S2MPA01_REG_B10CTRL2, \
>> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
>> > - .enable_reg = S2MPA01_REG_B10CTRL1, \
>> > - .enable_mask = S2MPA01_ENABLE_MASK \
>> > -}
>> > -
>> > static struct regulator_desc regulators[] = {
>> > - regulator_desc_ldo2(1),
>> > - regulator_desc_ldo1(2),
>> > - regulator_desc_ldo1(3),
>> > - regulator_desc_ldo1(4),
>> > - regulator_desc_ldo1(5),
>> > - regulator_desc_ldo2(6),
>> > - regulator_desc_ldo1(7),
>> > - regulator_desc_ldo1(8),
>> > - regulator_desc_ldo1(9),
>> > - regulator_desc_ldo1(10),
>> > - regulator_desc_ldo2(11),
>> > - regulator_desc_ldo1(12),
>> > - regulator_desc_ldo1(13),
>> > - regulator_desc_ldo1(14),
>> > - regulator_desc_ldo1(15),
>> > - regulator_desc_ldo1(16),
>> > - regulator_desc_ldo1(17),
>> > - regulator_desc_ldo1(18),
>> > - regulator_desc_ldo1(19),
>> > - regulator_desc_ldo1(20),
>> > - regulator_desc_ldo1(21),
>> > - regulator_desc_ldo2(22),
>> > - regulator_desc_ldo2(23),
>> > - regulator_desc_ldo1(24),
>> > - regulator_desc_ldo1(25),
>> > - regulator_desc_ldo1(26),
>> > + regulator_desc_ldo(1, MIN_800_MV, STEP_25_MV),
>> > + regulator_desc_ldo(2, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(3, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(4, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(5, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(6, MIN_800_MV, STEP_25_MV),
>> > + regulator_desc_ldo(7, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(8, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(9, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(10, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(11, MIN_800_MV, STEP_25_MV),
>> > + regulator_desc_ldo(12, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(13, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(14, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(15, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(16, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(17, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(18, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(19, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(20, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(21, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(22, MIN_800_MV, STEP_25_MV),
>> > + regulator_desc_ldo(23, MIN_800_MV, STEP_25_MV),
>> > + regulator_desc_ldo(24, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(25, MIN_800_MV, STEP_50_MV),
>> > + regulator_desc_ldo(26, MIN_800_MV, STEP_50_MV),
>> > regulator_desc_buck1_4(1),
>> > regulator_desc_buck1_4(2),
>> > regulator_desc_buck1_4(3),
>> > regulator_desc_buck1_4(4),
>> > regulator_desc_buck5,
>> > - regulator_desc_buck6_7(6),
>> > - regulator_desc_buck6_7(7),
>> > - regulator_desc_buck8,
>> > - regulator_desc_buck9,
>> > - regulator_desc_buck10,
>> > + regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
>> > + regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
>> > + regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
>> > + regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
>> > + regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
>> > };
>> >
>> > static int s2mpa01_pmic_probe(struct platform_device *pdev)
>> >
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists