[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1405022394-8311-3-git-send-email-boris.brezillon@free-electrons.com>
Date: Thu, 10 Jul 2014 21:59:54 +0200
From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Andrew Victor <linux@...im.org.za>,
Florian Fainelli <f.fainelli@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
Boris BREZILLON <boris.brezillon@...e-electrons.com>
Subject: [PATCH v3 2/2] ARM: at91: remove phy fixup for sama5d3xek boards
These board specific delays are now configured through micrel's specific
DT bindings (see Documentation/devicetree/bindings/net/micrel-ksz9021.txt).
Remove this phy fixup registration from sama5 DT machine file to keep it
as generic as possible.
Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
---
arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 075ec05..70b2504 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -46,30 +46,8 @@ static void __init at91_dt_init_irq(void)
of_irq_init(irq_of_match);
}
-static int ksz9021rn_phy_fixup(struct phy_device *phy)
-{
- int value;
-
- /* Set delay values */
- value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
- phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
- value = 0xF2F4;
- phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
- value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
- phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
- value = 0x2222;
- phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
-
- return 0;
-}
-
static void __init sama5_dt_device_init(void)
{
- if (of_machine_is_compatible("atmel,sama5d3xcm") &&
- IS_ENABLED(CONFIG_PHYLIB))
- phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
- ksz9021rn_phy_fixup);
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists