[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140711115406.GB2954@lee--X1>
Date: Fri, 11 Jul 2014 12:54:06 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kishon@...com
Cc: kernel@...inux.com
Subject: [PATCH v3+1 5/5] ARM: DT: STi: STiH416: Add DT node for MiPHY365x
The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
devices. It has 2 ports which it can use for either; both SATA, both
PCIe or one of each in any configuration.
Acked-by: Mark Rutland <mark.rutland@....com>
Acked-by: Alexandre Torgue <alexandre.torgue@...com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
index 4e2df66..c3c2ac6 100644
--- a/arch/arm/boot/dts/stih416-b2020.dts
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -12,4 +12,16 @@
/ {
model = "STiH416 B2020";
compatible = "st,stih416-b2020", "st,stih416";
+
+ soc {
+ miphy365x_phy: miphy365x@...82000 {
+ phy_port0: port@...82000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@...8a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index ba0fa2c..80aff0f 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -31,5 +31,15 @@
ethernet1: dwmac@...08000 {
snps,reset-gpio = <&PIO0 7>;
};
+
+ miphy365x_phy: miphy365x@...82000 {
+ phy_port0: port@...82000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@...8a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 84758d7..2b98a0a 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -9,6 +9,8 @@
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
@@ -236,5 +238,25 @@
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
+
+ miphy365x_phy: miphy365x@...82000 {
+ compatible = "st,miphy365x-phy";
+ st,syscfg = <&syscfg_rear>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@...82000 {
+ #phy-cells = <1>;
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+
+ phy_port1: port@...8a000 {
+ #phy-cells = <1>;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists