linux-kernel - [PATCH resending] splice: sendfile() at once fails for big files

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20140711120947.5105B1A9740@localhost.localdomain>
Date:	Fri, 11 Jul 2014 14:09:47 +0200 (CEST)
From:	Christophe Leroy <christophe.leroy@....fr>
To:	Alexander Viro <viro@...iv.linux.org.uk>
CC:	linux-kernel@...r.kernel.org, linux-fsdevel@...r.kernel.org,
	linux-crypto@...r.kernel.org
Subject: [PATCH resending] splice: sendfile() at once fails for big files

When big files (over 64kbytes) are sent with sendfile(), they are sent by blocks
of 64kbytes. In that case, the target must be informed that the current block is
not the last one, otherwise if might take wrong actions.
The issue was observed while sending a file to an AF_ALG socket for hashing. The
hash was reset at each 64k block.
This patch adds SPLICE_F_MORE to the flags when more data is pending.

Signed-off-by: Christophe Leroy <christophe.leroy@....fr>

Index: b/fs/splice.c
===================================================================
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1171,7 +1171,7 @@
 	long ret, bytes;
 	umode_t i_mode;
 	size_t len;
-	int i, flags;
+	int i, flags, more;
 
 	/*
 	 * We require the input being a regular file, as we don't want to
@@ -1214,6 +1214,7 @@
 	 * Don't block on output, we have to drain the direct pipe.
 	 */
 	sd->flags &= ~SPLICE_F_NONBLOCK;
+	more = sd->flags & SPLICE_F_MORE;
 
 	while (len) {
 		size_t read_len;
@@ -1226,6 +1227,10 @@
 		read_len = ret;
 		sd->total_len = read_len;
 
+		if (read_len < len)
+			sd->flags |= SPLICE_F_MORE;
+		else if (!more)
+			sd->flags &= ~SPLICE_F_MORE;
 		/*
 		 * NOTE: nonblocking mode only applies to the input. We
 		 * must not do the output in nonblocking mode as then we
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/