[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1405110995-24676-3-git-send-email-m-karicheri2@ti.com>
Date: Fri, 11 Jul 2014 16:36:31 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: <linux-arm-kernel@...ts.infradead.org>,
<linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: Murali Karicheri <m-karicheri2@...com>,
Russell King <linux@....linux.org.uk>,
Grant Likely <grant.likely@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Pratyush Anand <pratyush.anand@...com>,
Richard Zhu <r65037@...escale.com>,
Kishon Vijay Abraham I <kishon@...com>,
Marek Vasut <marex@...x.de>, Arnd Bergmann <arnd@...db.de>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Randy Dunlap <rdunlap@...radead.org>
Subject: [PATCH v4 2/6] PCI: designware: refactor MSI code to work with v3.65 dw hardware
Keystone PCI controller is based on v3.65 version of the DW
PCI h/w that implements MSI controller registers in application
space compared to the newer version. This requires updates to
the DW core API to support the PCI controller driver based on
this old DW hardware. Add msi_irq_set()/clear() API functions to
allow Set/Clear MSI IRQ enable bit in the application register.
Also the old h/w uses MSI_IRQ register in application register
space to raise MSI IRQ to the RC from EP. Current code uses the
standard mechanism as per PCI spec. So add another API get_msi_data()
to get the address of this register so that common code can be
re-used on old h/w.
Signed-off-by: Murali Karicheri <m-karicheri2@...com>
Acked-by: Mohit Kumar <mohit.kumar@...com>
Acked-by: Jingoo Han <jg1.han@...sung.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@...com>
CC: Russell King <linux@....linux.org.uk>
CC: Grant Likely <grant.likely@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>
CC: Bjorn Helgaas <bhelgaas@...gle.com>
CC: Pratyush Anand <pratyush.anand@...com>
CC: Richard Zhu <r65037@...escale.com>
CC: Kishon Vijay Abraham I <kishon@...com>
CC: Marek Vasut <marex@...x.de>
CC: Arnd Bergmann <arnd@...db.de>
CC: Pawel Moll <pawel.moll@....com>
CC: Mark Rutland <mark.rutland@....com>
CC: Ian Campbell <ijc+devicetree@...lion.org.uk>
CC: Kumar Gala <galak@...eaurora.org>
CC: Randy Dunlap <rdunlap@...radead.org>
CC: Grant Likely <grant.likely@...aro.org>
---
drivers/pci/host/pcie-designware.c | 50 ++++++++++++++++++++++++++----------
drivers/pci/host/pcie-designware.h | 3 +++
2 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index d8f3af7..905941c 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -217,27 +217,47 @@ static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
return 0;
}
+static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val &= ~(1 << bit);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static void clear_irq_range(struct pcie_port *pp, unsigned int irq_base,
unsigned int nvec, unsigned int pos)
{
- unsigned int i, res, bit, val;
+ unsigned int i;
for (i = 0; i < nvec; i++) {
irq_set_msi_desc_off(irq_base, i, NULL);
clear_bit(pos + i, pp->msi_irq_in_use);
/* Disable corresponding interrupt on MSI controller */
- res = ((pos + i) / 32) * 12;
- bit = (pos + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val &= ~(1 << bit);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_clear_irq)
+ pp->ops->msi_clear_irq(pp, pos + i);
+ else
+ dw_pcie_msi_clear_irq(pp, pos + i);
}
}
+static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
+{
+ unsigned int res, bit, val;
+
+ res = (irq / 32) * 12;
+ bit = irq % 32;
+ dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
+ val |= 1 << bit;
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+}
+
static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
{
- int res, bit, irq, pos0, pos1, i;
- u32 val;
+ int irq, pos0, pos1, i;
struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
if (!pp) {
@@ -281,11 +301,10 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
}
set_bit(pos0 + i, pp->msi_irq_in_use);
/*Enable corresponding interrupt in MSI interrupt controller */
- res = ((pos0 + i) / 32) * 12;
- bit = (pos0 + i) % 32;
- dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, &val);
- val |= 1 << bit;
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4, val);
+ if (pp->ops->msi_set_irq)
+ pp->ops->msi_set_irq(pp, pos0 + i);
+ else
+ dw_pcie_msi_set_irq(pp, pos0 + i);
}
*pos = pos0;
@@ -353,7 +372,10 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
*/
desc->msi_attrib.multiple = msgvec;
- msg.address_lo = virt_to_phys((void *)pp->msi_data);
+ if (pp->ops->get_msi_data)
+ msg.address_lo = pp->ops->get_msi_data(pp);
+ else
+ msg.address_lo = virt_to_phys((void *)pp->msi_data);
msg.address_hi = 0x0;
msg.data = pos;
write_msi_msg(irq, &msg);
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 8121901..387f69e 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -67,6 +67,9 @@ struct pcie_host_ops {
unsigned int devfn, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
void (*host_init)(struct pcie_port *pp);
+ void (*msi_set_irq)(struct pcie_port *pp, int irq);
+ void (*msi_clear_irq)(struct pcie_port *pp, int irq);
+ u32 (*get_msi_data)(struct pcie_port *pp);
};
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists