| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAF6AEGsMcosDoXB4OE_Yfa4QM+fDxVm5rg02DVZ3Gg-30K31mw@mail.gmail.com>
Date: Sat, 12 Jul 2014 07:49:53 -0400
From: Rob Clark <robdclark@...il.com>
To: Stephen Boyd <sboyd@...eaurora.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Mike Turquette <mturquette@...aro.org>
Subject: Re: [PATCH] clk: qcom: Support bypass RCG configuration
On Fri, Jul 11, 2014 at 4:01 PM, Stephen Boyd <sboyd@...eaurora.org> wrote:
> In the case of HDMI clocks, we want to bypass the RCG's ability
> to divide the output clock and pass through the parent HDMI PLL
> rate through. Add a simple set of clk_ops to configure the RCG to
> do this. This removes the need to keep adding more frequency
> entries to the tv_src clock whenever we want to support a new
> rate.
>
> Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
> ---
>
> On 07/11, Rob Clark wrote:
>> It would probably be better to get rid of the fixed table, which
>> duplicates the set of fixed frequences in the hdmi pll clk (in
>> drm/msm/hdmi). But I'll leave that as an exercise for someone
>> who knows the clk driver better than myself. Until then, this
>> trivial fix is useful.
>
> Here's a quick attempt at that. Let me know if this works.
yup, this works :-)
Tested-by: Rob Clark <robdclark@...il.com>
> drivers/clk/qcom/clk-rcg.c | 51 +++++++++++++++++++++++++++++++++++------
> drivers/clk/qcom/clk-rcg.h | 1 +
> drivers/clk/qcom/mmcc-msm8960.c | 9 ++------
> 3 files changed, 47 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c
> index abfc2b675aea..b638c5846dbf 100644
> --- a/drivers/clk/qcom/clk-rcg.c
> +++ b/drivers/clk/qcom/clk-rcg.c
> @@ -417,20 +417,25 @@ static long clk_dyn_rcg_determine_rate(struct clk_hw *hw, unsigned long rate,
> return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p);
> }
>
> -static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long parent_rate)
> +static long clk_rcg_bypass_determine_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *p_rate, struct clk **p)
> {
> struct clk_rcg *rcg = to_clk_rcg(hw);
> - const struct freq_tbl *f;
> + const struct freq_tbl *f = rcg->freq_tbl;
> +
> + *p = clk_get_parent_by_index(hw->clk, f->src);
> + *p_rate = __clk_round_rate(*p, rate);
> +
> + return *p_rate;
> +}
> +
> +static int __clk_rcg_set_rate(struct clk_rcg *rcg, const struct freq_tbl *f)
> +{
> u32 ns, md, ctl;
> struct mn *mn = &rcg->mn;
> u32 mask = 0;
> unsigned int reset_reg;
>
> - f = find_freq(rcg->freq_tbl, rate);
> - if (!f)
> - return -EINVAL;
> -
> if (rcg->mn.reset_in_cc)
> reset_reg = rcg->clkr.enable_reg;
> else
> @@ -466,6 +471,27 @@ static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
> return 0;
> }
>
> +static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_rcg *rcg = to_clk_rcg(hw);
> + const struct freq_tbl *f;
> +
> + f = find_freq(rcg->freq_tbl, rate);
> + if (!f)
> + return -EINVAL;
> +
> + return __clk_rcg_set_rate(rcg, f);
> +}
> +
> +static int clk_rcg_bypass_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_rcg *rcg = to_clk_rcg(hw);
> +
> + return __clk_rcg_set_rate(rcg, rcg->freq_tbl);
> +}
> +
> static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate)
> {
> struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
> @@ -503,6 +529,17 @@ const struct clk_ops clk_rcg_ops = {
> };
> EXPORT_SYMBOL_GPL(clk_rcg_ops);
>
> +const struct clk_ops clk_rcg_bypass_ops = {
> + .enable = clk_enable_regmap,
> + .disable = clk_disable_regmap,
> + .get_parent = clk_rcg_get_parent,
> + .set_parent = clk_rcg_set_parent,
> + .recalc_rate = clk_rcg_recalc_rate,
> + .determine_rate = clk_rcg_bypass_determine_rate,
> + .set_rate = clk_rcg_bypass_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_rcg_bypass_ops);
> +
> const struct clk_ops clk_dyn_rcg_ops = {
> .enable = clk_enable_regmap,
> .is_enabled = clk_is_enabled_regmap,
> diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
> index b9ec11dfd1b4..ba0523cefd2e 100644
> --- a/drivers/clk/qcom/clk-rcg.h
> +++ b/drivers/clk/qcom/clk-rcg.h
> @@ -95,6 +95,7 @@ struct clk_rcg {
> };
>
> extern const struct clk_ops clk_rcg_ops;
> +extern const struct clk_ops clk_rcg_bypass_ops;
>
> #define to_clk_rcg(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg, clkr)
>
> diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
> index 12f3c0b64fcd..14eeeba005f3 100644
> --- a/drivers/clk/qcom/mmcc-msm8960.c
> +++ b/drivers/clk/qcom/mmcc-msm8960.c
> @@ -1218,12 +1218,7 @@ static const char *mmcc_pxo_hdmi[] = {
> };
>
> static struct freq_tbl clk_tbl_tv[] = {
> - { 25200000, P_HDMI_PLL, 1, 0, 0 },
> - { 27000000, P_HDMI_PLL, 1, 0, 0 },
> - { 27030000, P_HDMI_PLL, 1, 0, 0 },
> - { 74250000, P_HDMI_PLL, 1, 0, 0 },
> - { 108000000, P_HDMI_PLL, 1, 0, 0 },
> - { 148500000, P_HDMI_PLL, 1, 0, 0 },
> + { .src = P_HDMI_PLL, .pre_div = 1 },
> { }
> };
>
> @@ -1254,7 +1249,7 @@ static struct clk_rcg tv_src = {
> .name = "tv_src",
> .parent_names = mmcc_pxo_hdmi,
> .num_parents = 2,
> - .ops = &clk_rcg_ops,
> + .ops = &clk_rcg_bypass_ops,
> .flags = CLK_SET_RATE_PARENT,
> },
> },
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists