| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1405176212-12175-7-git-send-email-minipli@googlemail.com>
Date: Sat, 12 Jul 2014 16:43:30 +0200
From: Mathias Krause <minipli@...glemail.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>
Cc: Joe Perches <joe@...ches.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org,
Mathias Krause <minipli@...glemail.com>
Subject: [PATCH v2 6/8] x86, mm: e820 - mark __init strings as such
Make use of the pi_<level>() helpers to mark the strings printed during
initialization for automatic release. Do so for the strings used in
command line parsing as well, by using the __init_str() macro.
The debug messages have been converted to printk_init(KERN_DEBUG ...)
instead of pi_debug(...), though. They might have some value beyond
debugging. Moreover, this ensures we won't loose any message by this
conversion.
This moves ~0.8 kB from the .rodata section to .init.rodata, marking it
for release after initialization.
Signed-off-by: Mathias Krause <minipli@...glemail.com>
---
arch/x86/kernel/e820.c | 87 ++++++++++++++++++++++++------------------------
1 file changed, 44 insertions(+), 43 deletions(-)
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index bfe9238e12..e347a272a9 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -25,6 +25,8 @@
#include <asm/proto.h>
#include <asm/setup.h>
+#define _(x) __init_str(x)
+
/*
* The e820 map is the map that gets modified e.g. with command line parameters
* and that is also registered with modifications in the kernel resource tree
@@ -113,7 +115,7 @@ static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
int x = e820x->nr_map;
if (x >= ARRAY_SIZE(e820x->map)) {
- printk(KERN_ERR "e820: too many entries; ignoring [mem %#010llx-%#010llx]\n",
+ pi_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n",
(unsigned long long) start,
(unsigned long long) (start + size - 1));
return;
@@ -135,22 +137,22 @@ static void __init e820_print_type(u32 type)
switch (type) {
case E820_RAM:
case E820_RESERVED_KERN:
- printk(KERN_CONT "usable");
+ pi_cont("usable");
break;
case E820_RESERVED:
- printk(KERN_CONT "reserved");
+ pi_cont("reserved");
break;
case E820_ACPI:
- printk(KERN_CONT "ACPI data");
+ pi_cont("ACPI data");
break;
case E820_NVS:
- printk(KERN_CONT "ACPI NVS");
+ pi_cont("ACPI NVS");
break;
case E820_UNUSABLE:
- printk(KERN_CONT "unusable");
+ pi_cont("unusable");
break;
default:
- printk(KERN_CONT "type %u", type);
+ pi_cont("type %u", type);
break;
}
}
@@ -160,12 +162,12 @@ void __init e820_print_map(const char *who)
int i;
for (i = 0; i < e820.nr_map; i++) {
- printk(KERN_INFO "%s: [mem %#018Lx-%#018Lx] ", who,
- (unsigned long long) e820.map[i].addr,
- (unsigned long long)
- (e820.map[i].addr + e820.map[i].size - 1));
+ pi_info("%s: [mem %#018Lx-%#018Lx] ", who,
+ (unsigned long long) e820.map[i].addr,
+ (unsigned long long)
+ (e820.map[i].addr + e820.map[i].size - 1));
e820_print_type(e820.map[i].type);
- printk(KERN_CONT "\n");
+ pi_cont("\n");
}
}
@@ -430,12 +432,12 @@ static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
size = ULLONG_MAX - start;
end = start + size;
- printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ",
- (unsigned long long) start, (unsigned long long) (end - 1));
+ printk_init(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ",
+ (unsigned long long) start, (unsigned long long) (end - 1));
e820_print_type(old_type);
- printk(KERN_CONT " ==> ");
+ pi_cont(" ==> ");
e820_print_type(new_type);
- printk(KERN_CONT "\n");
+ pi_cont("\n");
for (i = 0; i < e820x->nr_map; i++) {
struct e820entry *ei = &e820x->map[i];
@@ -510,11 +512,11 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
size = ULLONG_MAX - start;
end = start + size;
- printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ",
- (unsigned long long) start, (unsigned long long) (end - 1));
+ printk_init(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ",
+ (unsigned long long) start, (unsigned long long) (end - 1));
if (checktype)
e820_print_type(old_type);
- printk(KERN_CONT "\n");
+ pi_cont("\n");
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
@@ -567,8 +569,8 @@ void __init update_e820(void)
if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
return;
e820.nr_map = nr_map;
- printk(KERN_INFO "e820: modified physical RAM map:\n");
- e820_print_map("modified");
+ pi_info("e820: modified physical RAM map:\n");
+ e820_print_map(_("modified"));
}
static void __init update_e820_saved(void)
{
@@ -636,7 +638,7 @@ __init void e820_setup_gap(void)
#ifdef CONFIG_X86_64
if (!found) {
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR
+ pi_err(
"e820: cannot find a gap in the 32bit address range\n"
"e820: PCI devices with unassigned 32bit BARs may break!\n");
}
@@ -647,9 +649,8 @@ __init void e820_setup_gap(void)
*/
pci_mem_start = gapstart;
- printk(KERN_INFO
- "e820: [mem %#010lx-%#010lx] available for PCI devices\n",
- gapstart, gapstart + gapsize - 1);
+ pi_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n",
+ gapstart, gapstart + gapsize - 1);
}
/**
@@ -670,8 +671,8 @@ void __init parse_e820_ext(u64 phys_addr, u32 data_len)
__append_e820_map(extmap, entries);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
early_iounmap(sdata, data_len);
- printk(KERN_INFO "e820: extended physical RAM map:\n");
- e820_print_map("extended");
+ pi_info("e820: extended physical RAM map:\n");
+ e820_print_map(_("extended"));
}
#if defined(CONFIG_X86_64) || \
@@ -737,7 +738,7 @@ u64 __init early_reserve_e820(u64 size, u64 align)
addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
if (addr) {
e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
- printk(KERN_INFO "e820: update e820_saved for early_reserve_e820\n");
+ pi_info("e820: update e820_saved for early_reserve_e820\n");
update_e820_saved();
}
@@ -787,8 +788,8 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
if (last_pfn > max_arch_pfn)
last_pfn = max_arch_pfn;
- printk(KERN_INFO "e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
- last_pfn, max_arch_pfn);
+ pi_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n", last_pfn,
+ max_arch_pfn);
return last_pfn;
}
unsigned long __init e820_end_of_ram_pfn(void)
@@ -803,8 +804,8 @@ unsigned long __init e820_end_of_low_ram_pfn(void)
static void early_panic(const char *msg)
{
- early_printk("%s", msg);
- panic("%s", msg);
+ early_printk(_("%s"), msg);
+ panic(_("%s"), msg);
}
static int userdef __initdata;
@@ -817,12 +818,12 @@ static int __init parse_memopt(char *p)
if (!p)
return -EINVAL;
- if (!strcmp(p, "nopentium")) {
+ if (!strcmp(p, _("nopentium"))) {
#ifdef CONFIG_X86_32
setup_clear_cpu_cap(X86_FEATURE_PSE);
return 0;
#else
- printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n");
+ pi_warn("mem=nopentium ignored! (only supported on x86_32)\n");
return -EINVAL;
#endif
}
@@ -846,7 +847,7 @@ static int __init parse_memmap_one(char *p)
if (!p)
return -EINVAL;
- if (!strncmp(p, "exactmap", 8)) {
+ if (!strncmp(p, _("exactmap"), 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
@@ -902,11 +903,11 @@ void __init finish_e820_parsing(void)
u32 nr = e820.nr_map;
if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
- early_panic("Invalid user supplied memory map");
+ early_panic(_("Invalid user supplied memory map"));
e820.nr_map = nr;
- printk(KERN_INFO "e820: user-defined physical RAM map:\n");
- e820_print_map("user");
+ pi_info("e820: user-defined physical RAM map:\n");
+ e820_print_map(_("user"));
}
}
@@ -1013,7 +1014,7 @@ void __init e820_reserve_resources_late(void)
end = MAX_RESOURCE_SIZE;
if (start >= end)
continue;
- printk(KERN_DEBUG
+ printk_init(KERN_DEBUG
"e820: reserve RAM buffer [mem %#010llx-%#010llx]\n",
start, end);
reserve_region_with_split(&iomem_resource, start, end,
@@ -1023,7 +1024,7 @@ void __init e820_reserve_resources_late(void)
const char *__init default_machine_specific_memory_setup(void)
{
- const char *who = "BIOS-e820";
+ const char *who = _("BIOS-e820");
u32 new_nr;
/*
* Try to copy the BIOS-supplied E820-map.
@@ -1044,10 +1045,10 @@ const char *__init default_machine_specific_memory_setup(void)
if (boot_params.alt_mem_k
< boot_params.screen_info.ext_mem_k) {
mem_size = boot_params.screen_info.ext_mem_k;
- who = "BIOS-88";
+ who = _("BIOS-88");
} else {
mem_size = boot_params.alt_mem_k;
- who = "BIOS-e801";
+ who = _("BIOS-e801");
}
e820.nr_map = 0;
@@ -1065,7 +1066,7 @@ void __init setup_memory_map(void)
who = x86_init.resources.memory_setup();
memcpy(&e820_saved, &e820, sizeof(struct e820map));
- printk(KERN_INFO "e820: BIOS-provided physical RAM map:\n");
+ pi_info("e820: BIOS-provided physical RAM map:\n");
e820_print_map(who);
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists