| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140713230328.GL13108@titan.lakedaemon.net>
Date: Sun, 13 Jul 2014 19:03:28 -0400
From: Jason Cooper <jason@...edaemon.net>
To: suravee.suthikulpanit@....com
Cc: marc.zyngier@....com, mark.rutland@....com, pawel.moll@....com,
Catalin.Marinas@....com, Will.Deacon@....com, tglx@...utronix.de,
Harish.Kasiviswanathan@....com,
linux-arm-kernel@...ts.infradead.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH 4/4 V3] irqchip: gicv2m: Add support for multiple MSI
for ARM64 GICv2m
Suravee,
If you need to respin this series, please change the subject line to
"irqchip: gic-v2m: ..." If there are no other changes needed, It can be
fixed up when applied.
thx,
Jason.
On Wed, Jul 09, 2014 at 06:05:04PM -0500, suravee.suthikulpanit@....com wrote:
> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
>
> This patch extend GICv2m MSI to support multiple MSI in ARM64.
>
> This requires the common arch_setup_msi_irqs() to be overwriten
> with ARM64 version which does not return 1 for PCI_CAP_ID_MSI and
> nvec > 1.
>
> Cc: Mark Rutland <Mark.Rutland@....com>
> Cc: Marc Zyngier <Marc.Zyngier@....com>
> Cc: Jason Cooper <jason@...edaemon.net>
> Cc: Catalin Marinas <Catalin.Marinas@....com>
> Cc: Will Deacon <Will.Deacon@....com>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
> ---
> arch/arm64/include/asm/msi.h | 15 ++++++++
> arch/arm64/kernel/Makefile | 1 +
> arch/arm64/kernel/msi.c | 57 ++++++++++++++++++++++++++++++
> drivers/irqchip/irq-gic-v2m.c | 80 +++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 153 insertions(+)
> create mode 100644 arch/arm64/include/asm/msi.h
> create mode 100644 arch/arm64/kernel/msi.c
>
> diff --git a/arch/arm64/include/asm/msi.h b/arch/arm64/include/asm/msi.h
> new file mode 100644
> index 0000000..2a0944a
> --- /dev/null
> +++ b/arch/arm64/include/asm/msi.h
> @@ -0,0 +1,15 @@
> +#ifndef _ASM_ARM64_MSI_H_
> +#define _ASM_ARM64_MSI_H_
> +
> +struct pci_dev;
> +struct msi_desc;
> +
> +struct arm64_msi_ops {
> + int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
> + void (*teardown_msi_irqs)(struct pci_dev *dev);
> +};
> +
> +extern struct arm64_msi_ops arm64_msi;
> +extern int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
> +
> +#endif /* _ASM_ARM64_MSI_H_ */
> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
> index cdaedad..0636e27 100644
> --- a/arch/arm64/kernel/Makefile
> +++ b/arch/arm64/kernel/Makefile
> @@ -29,6 +29,7 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
> arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
> arm64-obj-$(CONFIG_KGDB) += kgdb.o
> arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
> +arm64-obj-$(CONFIG_PCI_MSI) += msi.o
>
> obj-y += $(arm64-obj-y) vdso/
> obj-m += $(arm64-obj-m)
> diff --git a/arch/arm64/kernel/msi.c b/arch/arm64/kernel/msi.c
> new file mode 100644
> index 0000000..ed62397
> --- /dev/null
> +++ b/arch/arm64/kernel/msi.c
> @@ -0,0 +1,57 @@
> +/*
> + * ARM64 architectural MSI implemention
> + *
> + * Support for Message Signalelled Interrupts for systems that
> + * implement ARM Generic Interrupt Controller: GICv2m.
> + *
> + * Copyright (C) 2014 Advanced Micro Devices, Inc.
> + * Authors: Suravee Suthikulpanit <suravee.suthikulpanit@....com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/msi.h>
> +#include <linux/pci.h>
> +
> +#include <asm/msi.h>
> +
> +/*
> + * ARM64 function for seting up MSI irqs.
> + * Copied from driver/pci/msi.c: arch_setup_msi_irqs().
> + */
> +int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> + struct msi_desc *entry;
> + int ret;
> +
> + if (type == PCI_CAP_ID_MSI && nvec > 1)
> + return 1;
> +
> + list_for_each_entry(entry, &dev->msi_list, list) {
> + ret = arch_setup_msi_irq(dev, entry);
> + if (ret < 0)
> + return ret;
> + if (ret > 0)
> + return -ENOSPC;
> + }
> +
> + return 0;
> +}
> +
> +struct arm64_msi_ops arm64_msi = {
> + .setup_msi_irqs = arm64_setup_msi_irqs,
> + .teardown_msi_irqs = default_teardown_msi_irqs,
> +};
> +
> +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> + return arm64_msi.setup_msi_irqs(dev, nvec, type);
> +}
> +
> +void arch_teardown_msi_irqs(struct pci_dev *dev)
> +{
> + arm64_msi.teardown_msi_irqs(dev);
> +}
> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
> index e54ca1d..9d88ad9 100644
> --- a/drivers/irqchip/irq-gic-v2m.c
> +++ b/drivers/irqchip/irq-gic-v2m.c
> @@ -24,6 +24,10 @@
> #include <linux/of_pci.h>
> #include <linux/bitmap.h>
>
> +#ifdef CONFIG_ARM64
> +#include <asm/msi.h>
> +#endif
> +
> #include "irqchip.h"
> #include "irq-gic.h"
>
> @@ -216,6 +220,80 @@ static struct irq_chip gicv2m_chip = {
> #endif
> };
>
> +
> +/*
> + * _gicv2m_setup_msi_irqs - Setup MSI interrupts for the given PCI device.
> + * This overrides the weak definition in ./drivers/pci/msi.c.
> + * If nvec interrupts are irqable, then assign it to PCI device.
> + * Otherwise return error.
> + *
> + * @pdev: PCI device which is requesting to enable MSI
> + * @nvec: number of MSI vectors
> + */
> +static int _gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec)
> +{
> + int irq = 0, nvec_pow2 = 0, avail;
> + int i = 0;
> + struct msi_msg msg;
> + phys_addr_t addr;
> + struct msi_desc *entry;
> + struct msi_chip *chip = pdev->bus->msi;
> + struct v2m_data *data = to_v2m_data(chip);
> +
> + BUG_ON(list_empty(&pdev->msi_list));
> + WARN_ON(!list_is_singular(&pdev->msi_list));
> +
> + entry = list_first_entry(&pdev->msi_list, struct msi_desc, list);
> + WARN_ON(entry->irq);
> + WARN_ON(entry->msi_attrib.multiple);
> + WARN_ON(entry->nvec_used);
> + WARN_ON(!entry->dev);
> +
> + avail = alloc_msi_irq(data, nvec, &irq);
> + if (avail != 0) {
> + dev_err(&pdev->dev,
> + "GICv2m: Failed to allocate %d irqs.\n", nvec);
> + return avail;
> + }
> +
> + /* Set lowest of the new interrupts assigned to the PCI device */
> + nvec_pow2 = __roundup_pow_of_two(nvec);
> + entry->nvec_used = nvec;
> + entry->msi_attrib.multiple = ilog2(nvec_pow2);
> +
> + for (i = 0; i < nvec; i++) {
> + irq_set_chip_data(irq+i, chip);
> + if (irq_set_msi_desc_off(irq, i, entry)) {
> + dev_err(&pdev->dev,
> + "GICv2m: Failed to set up MSI irq %d\n",
> + (irq+i));
> + return -EINVAL;
> + }
> +
> + irq_set_irq_type((irq+i), IRQ_TYPE_EDGE_RISING);
> + }
> +
> + addr = data->res.start + V2M_MSI_SETSPI_NS;
> + msg.address_hi = (u32)(addr >> 32);
> + msg.address_lo = (u32)(addr);
> + msg.data = irq;
> + write_msi_msg(irq, &msg);
> +
> + return 0;
> +}
> +
> +static int
> +gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +{
> + int ret;
> +
> + if (type == PCI_CAP_ID_MSI)
> + ret = _gicv2m_setup_msi_irqs(pdev, nvec);
> + else
> + ret = arm64_setup_msi_irqs(pdev, nvec, type);
> + return ret;
> +}
> +
> #ifdef CONFIG_OF
> static int __init
> gicv2m_of_init(struct device_node *node, struct device_node *parent)
> @@ -229,6 +307,8 @@ gicv2m_of_init(struct device_node *node, struct device_node *parent)
> return ret;
> }
>
> + arm64_msi.setup_msi_irqs = &gicv2m_setup_msi_irqs;
> +
> gic->msi_chip.owner = THIS_MODULE;
> gic->msi_chip.of_node = node;
> gic->msi_chip.setup_irq = gicv2m_setup_msi_irq;
> --
> 1.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists