| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <53C31C56.2060104@samsung.com>
Date: Mon, 14 Jul 2014 08:55:02 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Amit Kachhap <amit.kachhap@...il.com>, edubezval@...il.com
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Zhang Rui <rui.zhang@...el.com>,
"Valentin, Eduardo" <eduardo.valentin@...com>,
Kukjin Kim <kgene.kim@...sung.com>,
Tomasz Figa <t.figa@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Jonghwa Lee <jonghwa3.lee@...sung.com>
Subject: Re: [PATCH] thermal: samsung: Add TMU support for Exynos3250 SoC
Dear Eduardo,
Could you please review or pick this patch?
Best Regards,
Chanwoo Choi
On 07/10/2014 12:36 PM, Amit Kachhap wrote:
> On Wed, Jul 9, 2014 at 8:30 AM, Chanwoo Choi <cw00.choi@...sung.com> wrote:
>> On 07/01/2014 09:33 AM, Chanwoo Choi wrote:
>>> This patch add registers, bit fields and compatible strings for Exynos3250 TMU
>>> (Thermal Management Unit). Exynos3250 uses the Cortex-A7 dual cores and has
>>> a target speed of 1.0 GHz.
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
>>> [Add MUX address setting bits by Jonghwa Lee]
>>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
>>> Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
>
> Changes look fine to me.
> Reviewed-by: Amit Daniel Kachhap<amit.daniel@...sung.com>
>
>>> ---
>>> .../devicetree/bindings/thermal/exynos-thermal.txt | 1 +
>>> drivers/thermal/samsung/exynos_tmu.c | 7 +-
>>> drivers/thermal/samsung/exynos_tmu.h | 3 +-
>>> drivers/thermal/samsung/exynos_tmu_data.c | 89 ++++++++++++++++++++++
>>> drivers/thermal/samsung/exynos_tmu_data.h | 7 ++
>>> 5 files changed, 105 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> index c949092..ae738f5 100644
>>> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>>> @@ -3,6 +3,7 @@
>>> ** Required properties:
>>>
>>> - compatible : One of the following:
>>> + "samsung,exynos3250-tmu"
>>> "samsung,exynos4412-tmu"
>>> "samsung,exynos4210-tmu"
>>> "samsung,exynos5250-tmu"
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>> index 2412090..97ebc1e 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> @@ -501,6 +501,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
>>>
>>> static const struct of_device_id exynos_tmu_match[] = {
>>> {
>>> + .compatible = "samsung,exynos3250-tmu",
>>> + .data = (void *)EXYNOS3250_TMU_DRV_DATA,
>>> + },
>>> + {
>>> .compatible = "samsung,exynos4210-tmu",
>>> .data = (void *)EXYNOS4210_TMU_DRV_DATA,
>>> },
>>> @@ -675,7 +679,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>> goto err_clk_sec;
>>> }
>>>
>>> - if (pdata->type == SOC_ARCH_EXYNOS4210 ||
>>> + if (pdata->type == SOC_ARCH_EXYNOS3250 ||
>>> + pdata->type == SOC_ARCH_EXYNOS4210 ||
>>> pdata->type == SOC_ARCH_EXYNOS4412 ||
>>> pdata->type == SOC_ARCH_EXYNOS5250 ||
>>> pdata->type == SOC_ARCH_EXYNOS5260 ||
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>>> index edd08cf..1b4a644 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>>> @@ -40,7 +40,8 @@ enum calibration_mode {
>>> };
>>>
>>> enum soc_type {
>>> - SOC_ARCH_EXYNOS4210 = 1,
>>> + SOC_ARCH_EXYNOS3250 = 1,
>>> + SOC_ARCH_EXYNOS4210,
>>> SOC_ARCH_EXYNOS4412,
>>> SOC_ARCH_EXYNOS5250,
>>> SOC_ARCH_EXYNOS5260,
>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>>> index c1d81dc..aa8e0de 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>>> @@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
>>> };
>>> #endif
>>>
>>> +#if defined(CONFIG_SOC_EXYNOS3250)
>>> +static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>>> + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>>> + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>>> + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>>> + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>>> + .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>>> + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>>> + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
>>> + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
>>> + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
>>> + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>>> + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>>> + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
>>> + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>>> + .tmu_status = EXYNOS_TMU_REG_STATUS,
>>> + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
>>> + .threshold_th0 = EXYNOS_THD_TEMP_RISE,
>>> + .threshold_th1 = EXYNOS_THD_TEMP_FALL,
>>> + .tmu_inten = EXYNOS_TMU_REG_INTEN,
>>> + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
>>> + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
>>> + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
>>> + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
>>> + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>>> + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>>> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
>>> + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
>>> + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
>>> + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
>>> + .emul_con = EXYNOS_EMUL_CON,
>>> + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>> + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
>>> + .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
>>> +};
>>> +
>>> +#define EXYNOS3250_TMU_DATA \
>>> + .threshold_falling = 10, \
>>> + .trigger_levels[0] = 70, \
>>> + .trigger_levels[1] = 95, \
>>> + .trigger_levels[2] = 110, \
>>> + .trigger_levels[3] = 120, \
>>> + .trigger_enable[0] = true, \
>>> + .trigger_enable[1] = true, \
>>> + .trigger_enable[2] = true, \
>>> + .trigger_enable[3] = false, \
>>> + .trigger_type[0] = THROTTLE_ACTIVE, \
>>> + .trigger_type[1] = THROTTLE_ACTIVE, \
>>> + .trigger_type[2] = SW_TRIP, \
>>> + .trigger_type[3] = HW_TRIP, \
>>> + .max_trigger_level = 4, \
>>> + .gain = 8, \
>>> + .reference_voltage = 16, \
>>> + .noise_cancel_mode = 4, \
>>> + .cal_type = TYPE_TWO_POINT_TRIMMING, \
> Looks that this SOC is using 2 point trimming.
>
> Bartlomiej,
>
> Please reformat your clean up series which is deleting this feature.
> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg665748.html.
>
> Regards,
> Amit D
>
>
>>> + .efuse_value = 55, \
>>> + .min_efuse_value = 40, \
>>> + .max_efuse_value = 100, \
>>> + .first_point_trim = 25, \
>>> + .second_point_trim = 85, \
>>> + .default_temp_offset = 50, \
>>> + .freq_tab[0] = { \
>>> + .freq_clip_max = 800 * 1000, \
>>> + .temp_level = 70, \
>>> + }, \
>>> + .freq_tab[1] = { \
>>> + .freq_clip_max = 400 * 1000, \
>>> + .temp_level = 95, \
>>> + }, \
>>> + .freq_tab_count = 2, \
>>> + .registers = &exynos3250_tmu_registers, \
>>> + .features = (TMU_SUPPORT_EMULATION | \
>>> + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>>> + TMU_SUPPORT_EMUL_TIME)
>>> +#endif
>>> +
>>> +#if defined(CONFIG_SOC_EXYNOS3250)
>>> +struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
>>> + .tmu_data = {
>>> + {
>>> + EXYNOS3250_TMU_DATA,
>>> + .type = SOC_ARCH_EXYNOS3250,
>>> + .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
>>> + },
>>> + },
>>> + .tmu_count = 1,
>>> +};
>>> +#endif
>>> +
>>> #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
>>> static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>>> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>>> index d268981..f0979e5 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>>> @@ -148,6 +148,13 @@
>>> #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
>>> #define EXYNOS5440_EFUSE_SWAP_OFFSET 8
>>>
>>> +#if defined(CONFIG_SOC_EXYNOS3250)
>>> +extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
>>> +#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data)
>>> +#else
>>> +#define EXYNOS3250_TMU_DRV_DATA (NULL)
>>> +#endif
>>> +
>>> #if defined(CONFIG_CPU_EXYNOS4210)
>>> extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
>>> #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>>>
>>
>> Ping.
>>
>> Best Regards,
>> Chanwoo Choi
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists