[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <1B4D2ECA-7CD4-4E5D-97EC-375E92015ECC@codeaurora.org>
Date: Tue, 15 Jul 2014 11:30:04 -0500
From: Kumar Gala <galak@...eaurora.org>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: linux-ide@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, sboyd@...eaurora.org,
b.zolnierkie@...sung.com
Subject: Re: [PATCH v5 1/2] phy: qcom: Add driver for QCOM IPQ806x SATA PHY
On Jul 15, 2014, at 10:11 AM, Kishon Vijay Abraham I <kishon@...com> wrote:
> Hi,
>
> On Wednesday 18 June 2014 12:03 AM, Kumar Gala wrote:
>> Add a PHY driver for uses with AHCI based SATA controller driver on the
>> IPQ806x family of SoCs.
>>
>> Signed-off-by: Kumar Gala <galak@...eaurora.org>
>> ---
>> v5:
>> * Fix copy/paste error when killing qcom_ipq806x_sata_delay_us
>>
>> v4:
>> * removed qcom_ipq806x_sata_delay_us as it was only used one
>>
>> v3:
>> * Added Kconfig HAS_IOMEM dep
>> * re-ordered probe function so phy_provider_register is last
>>
>> v2:
>> * dropped unused dev pointer in struct qcom_ipq806x_sata_phy
>> * remove unnecessary reg initializaiton
>> * Removed unneeded error message
>> * Added remove function to disable the clock
>>
>> drivers/phy/Kconfig | 7 ++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-qcom-ipq806x-sata.c | 206 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 214 insertions(+)
>> create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 16a2f06..b7b6bce 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -178,4 +178,11 @@ config PHY_XGENE
>> help
>> This option enables support for APM X-Gene SoC multi-purpose PHY.
>>
> .
> .
> <snip>
> .
> .
>> +
>> +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
>> +{
>> + struct qcom_ipq806x_sata_phy *phy;
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct phy_provider *phy_provider;
>> + struct phy *generic_phy;
>> + int ret;
>> +
>> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> + if (!phy) {
>> + dev_err(dev, "%s: failed to allocate phy\n", __func__);
>> + return -ENOMEM;
>> + }
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + phy->mmio = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(phy->mmio))
>> + return PTR_ERR(phy->mmio);
>> +
>> + generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL);
>> + if (IS_ERR(generic_phy)) {
>> + dev_err(dev, "%s: failed to create phy\n", __func__);
>> + return PTR_ERR(generic_phy);
>> + }
>> +
>> + phy_set_drvdata(generic_phy, phy);
>> +
>> + phy->cfg_clk = devm_clk_get(dev, "cfg");
>> + if (IS_ERR(phy->cfg_clk)) {
>> + dev_err(dev, "Failed to get sata cfg clock\n");
>> + return PTR_ERR(phy->cfg_clk);
>> + }
>> +
>> + ret = clk_prepare_enable(phy->cfg_clk);
>> + if (ret)
>> + return ret;
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> + if (IS_ERR(phy_provider)) {
>> + clk_disable_unprepare(phy->cfg_clk);
>> + dev_err(dev, "%s: failed to register phy\n", __func__);
>> + return PTR_ERR(phy_provider);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
>> +{
>> + struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
>
> Where is platform_set_drvdata()?
Fixed in v6
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists