| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1405394144-26007-1-git-send-email-asadi.samuel@gmail.com>
Date: Tue, 15 Jul 2014 06:15:44 +0300
From: sam-the-6 <asadi.samuel@...il.com>
To: abbotti@....co.uk, hsweeten@...ionengravers.com,
gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Sam Asadi <asadi.samuel@...il.com>
Subject: [PATCH 92/93] Staging: comedi: 8255: fixed by adding an empthy line
From: Sam Asadi <asadi.samuel@...il.com>
fixed a coding style issue.
Signed-off-by: Sam Asadi <asadi.samuel@...il.com>
modified: drivers/staging/comedi/drivers/8255.c
---
drivers/staging/comedi/drivers/8255.c | 150 ++++++++++++++++-----------------
1 file changed, 74 insertions(+), 76 deletions(-)
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 46113a3..de273c7 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -1,77 +1,73 @@
/*
- comedi/drivers/8255.c
- Driver for 8255
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1998 David A. Schleef <ds@...leef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ comedi/drivers/8255.c
+ Driver for 8255
+
+ COMEDI - Linux Control and Measurement Device Interface
+ Copyright (C) 1998 David A. Schleef <ds@...leef.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ Driver: 8255
+ Description: generic 8255 support
+ Devices: [standard] 8255 (8255)
+ Author: ds
+ Status: works
+ Updated: Fri, 7 Jun 2002 12:56:45 -0700
+
+ The classic in digital I/O. The 8255 appears in Comedi as a single
+ digital I/O subdevice with 24 channels. The channel 0 corresponds
+ to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
+ 7. Direction configuration is done in blocks, with channels 0-7,
+ 8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
+ supported is mode 0.
+
+ You should enable compilation this driver if you plan to use a board
+ that has an 8255 chip. For multifunction boards, the main driver will
+ configure the 8255 subdevice automatically.
+
+ This driver also works independently with ISA and PCI cards that
+ directly map the 8255 registers to I/O ports, including cards with
+ multiple 8255 chips. To configure the driver for such a card, the
+ option list should be a list of the I/O port bases for each of the
+ 8255 chips. For example,
+
+ comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
+
+ Note that most PCI 8255 boards do NOT work with this driver, and
+ need a separate driver as a wrapper. For those that do work, the
+ I/O port base address can be found in the output of 'lspci -v'.
+
+ This file contains an exported subdevice for driving an 8255.
+
+ To use this subdevice as part of another driver, you need to
+ set up the subdevice in the attach function of the driver by
+ calling:
+
+ subdev_8255_init(device, subdevice, io_function, iobase)
+
+ device and subdevice are pointers to the device and subdevice
+ structures. io_function will be called to provide the
+ low-level input/output to the device, i.e., actual register
+ access. io_function will be called with the value of iobase
+ as the last parameter. If the 8255 device is mapped as 4
+ consecutive I/O ports, you can use NULL for io_function
+ and the I/O port base for iobase, and an internal function will
+ handle the register access.
+
+ In addition, if the main driver handles interrupts, you can
+ enable commands on the subdevice by calling subdev_8255_init_irq()
+ instead. Then, when you get an interrupt that is likely to be
+ from the 8255, you should call subdev_8255_interrupt(), which
+ will copy the latched value to a Comedi buffer.
*/
-/*
-Driver: 8255
-Description: generic 8255 support
-Devices: [standard] 8255 (8255)
-Author: ds
-Status: works
-Updated: Fri, 7 Jun 2002 12:56:45 -0700
-
-The classic in digital I/O. The 8255 appears in Comedi as a single
-digital I/O subdevice with 24 channels. The channel 0 corresponds
-to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
-7. Direction configuration is done in blocks, with channels 0-7,
-8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
-supported is mode 0.
-
-You should enable compilation this driver if you plan to use a board
-that has an 8255 chip. For multifunction boards, the main driver will
-configure the 8255 subdevice automatically.
-
-This driver also works independently with ISA and PCI cards that
-directly map the 8255 registers to I/O ports, including cards with
-multiple 8255 chips. To configure the driver for such a card, the
-option list should be a list of the I/O port bases for each of the
-8255 chips. For example,
-
- comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
-
-Note that most PCI 8255 boards do NOT work with this driver, and
-need a separate driver as a wrapper. For those that do work, the
-I/O port base address can be found in the output of 'lspci -v'.
-
-*/
-
-/*
- This file contains an exported subdevice for driving an 8255.
-
- To use this subdevice as part of another driver, you need to
- set up the subdevice in the attach function of the driver by
- calling:
-
- subdev_8255_init(device, subdevice, io_function, iobase)
-
- device and subdevice are pointers to the device and subdevice
- structures. io_function will be called to provide the
- low-level input/output to the device, i.e., actual register
- access. io_function will be called with the value of iobase
- as the last parameter. If the 8255 device is mapped as 4
- consecutive I/O ports, you can use NULL for io_function
- and the I/O port base for iobase, and an internal function will
- handle the register access.
-
- In addition, if the main driver handles interrupts, you can
- enable commands on the subdevice by calling subdev_8255_init_irq()
- instead. Then, when you get an interrupt that is likely to be
- from the 8255, you should call subdev_8255_interrupt(), which
- will copy the latched value to a Comedi buffer.
- */
#include <linux/module.h>
#include "../comedidev.h"
@@ -94,6 +90,7 @@ I/O port base address can be found in the output of 'lspci -v'.
struct subdev_8255_private {
unsigned long iobase;
+
int (*io)(int, int, int, unsigned long);
};
@@ -102,9 +99,8 @@ static int subdev_8255_io(int dir, int port, int data, unsigned long iobase)
if (dir) {
outb(data, iobase + port);
return 0;
- } else {
+ } else
return inb(iobase + port);
- }
}
void subdev_8255_interrupt(struct comedi_device *dev,
@@ -309,9 +305,9 @@ EXPORT_SYMBOL_GPL(subdev_8255_init_irq);
/*
- Start of the 8255 standalone device
+ Start of the 8255 standalone device
- */
+*/
static int dev_8255_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
@@ -373,8 +369,10 @@ static struct comedi_driver dev_8255_driver = {
.attach = dev_8255_attach,
.detach = dev_8255_detach,
};
+
module_comedi_driver(dev_8255_driver);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
+
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists