lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Jul 2014 13:51:40 +0530 From: Vivek Gautam <gautam.vivek@...sung.com> To: linux-usb@...r.kernel.org, linux-samsung-soc@...r.kernel.org Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, gregkh@...uxfoundation.org, kishon@...com, kgene.kim@...sung.com, mathias.nyman@...el.com, jwerner@...omium.org, sergei.shtylyov@...entembedded.com, heikki.krogerus@...ux.intel.com, pratyush.anand@...com, Vivek Gautam <gautam.vivek@...sung.com> Subject: [PATCH v4 2/4] usb: host: xhci-plat: Get PHYs for xhci's hcds The host controller by itself may sometimes need to handle PHY and/or calibrate some of the PHY settings to get full support out of the PHY controller. The PHY core provides a calibration funtionality now to do so. Therefore, facilitate getting the two possible PHYs, viz. USB 2.0 type (UTMI+) and USB 3.0 type (PIPE3). Signed-off-by: Vivek Gautam <gautam.vivek@...sung.com> --- Changes from v3: - Modified error message as per review comments from Julius. drivers/usb/host/xhci-plat.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 1a0cf9f..b1c0364 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h> #include <linux/slab.h> #include <linux/usb/xhci_pdriver.h> @@ -180,6 +181,15 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } + /* Get possile USB 2.0 type PHY (UTMI+) available with xhci */ + hcd->gen_phy = devm_phy_get(&pdev->dev, "usb2-phy"); + if (IS_ERR(hcd->gen_phy)) { + ret = PTR_ERR(hcd->gen_phy); + if (ret != -ENOSYS && ret != -ENODEV) + dev_warn(&pdev->dev, + "Error retrieving usb2 phy: %d\n", ret); + } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) goto disable_clk; @@ -209,6 +219,15 @@ static int xhci_plat_probe(struct platform_device *pdev) if (HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; + /* Get possile USB 3.0 type PHY (PIPE3) available with xhci */ + xhci->shared_hcd->gen_phy = devm_phy_get(&pdev->dev, "usb3-phy"); + if (IS_ERR(xhci->shared_hcd->gen_phy)) { + ret = PTR_ERR(xhci->shared_hcd->gen_phy); + if (ret != -ENOSYS && ret != -ENODEV) + dev_warn(&pdev->dev, + "Error retrieving usb3 phy: %d\n", ret); + } + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists