[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1405512783-20307-3-git-send-email-grygorii.strashko@ti.com>
Date: Wed, 16 Jul 2014 15:13:03 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
<santosh.shilimkar@...com>, <netdev@...r.kernel.org>
CC: <prabhakar.csengg@...il.com>, Sekhar Nori <nsekhar@...com>,
Rob Herring <robh+dt@...nel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<davinci-linux-open-source@...ux.davincidsp.com>,
<mugunthanvnm@...com>, Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH v2 2/2] net: davinci_mdio: allow to create phys from dt
This patch allows to create PHYs from DT in case
if they are explicitly defined. The of_mdiobus_register() is
used for such purposes.
For backward compatibility, call of_mdiobus_register() only in case
if at least one PHY's child is defined in DT, otherwise rollback to
mdiobus_register().
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@...com>
Acked-by: Mugunthan V N <mugunthanvnm@...com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
Hi Santosh,
I haven't changed style for long-comments, because Networking subsystem
requires first line of comment not to be empty:
WARNING:NETWORKING_BLOCK_COMMENT_STYLE: networking block comments don't use an empty /* line, use /* Comment...
drivers/net/ethernet/ti/davinci_mdio.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 735dc53..2791f6f 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -38,6 +38,7 @@
#include <linux/davinci_emac.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include <linux/pinctrl/consumer.h>
/*
@@ -95,6 +96,10 @@ struct davinci_mdio_data {
struct mii_bus *bus;
bool suspended;
unsigned long access_time; /* jiffies */
+ /* Indicates that driver shouldn't modify phy_mask in case
+ * if MDIO bus is registered from DT.
+ */
+ bool skip_scan;
};
static void __davinci_mdio_reset(struct davinci_mdio_data *data)
@@ -144,6 +149,9 @@ static int davinci_mdio_reset(struct mii_bus *bus)
dev_info(data->dev, "davinci mdio revision %d.%d\n",
(ver >> 8) & 0xff, ver & 0xff);
+ if (data->skip_scan)
+ return 0;
+
/* get phy mask from the alive register */
phy_mask = __raw_readl(&data->regs->alive);
if (phy_mask) {
@@ -369,8 +377,17 @@ static int davinci_mdio_probe(struct platform_device *pdev)
goto bail_out;
}
- /* register the mii bus */
- ret = mdiobus_register(data->bus);
+ /* register the mii bus
+ * Create PHYs from DT only in case if PHY child nodes are explicitly
+ * defined to support backward compatibility with DTs which assume that
+ * Davinci MDIO will always scan the bus for PHYs detection.
+ */
+ if (dev->of_node && of_get_child_count(dev->of_node)) {
+ data->skip_scan = true;
+ ret = of_mdiobus_register(data->bus, dev->of_node);
+ } else {
+ ret = mdiobus_register(data->bus);
+ }
if (ret)
goto bail_out;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists