[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140718081724.GL30888@lee--X1>
Date: Fri, 18 Jul 2014 09:17:24 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Cc: Mark Brown <broonie@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Kukjin Kim <kgene.kim@...sung.com>,
Doug Anderson <dianders@...omium.org>,
Olof Johansson <olof@...om.net>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Yadwinder Singh Brar <yadi.brar01@...il.com>,
Tushar Behera <trblinux@...il.com>,
Andreas Farber <afaerber@...e.de>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 02/24] mfd: max77686: Add power management support
On Fri, 04 Jul 2014, Javier Martinez Canillas wrote:
> The driver doesn't have PM operations defined so add a suspend
> and resume function handlers to allow the PMIC IRQ to wakeup
> the system when it is put into a sleep state.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> ---
> drivers/mfd/max77686.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
Applied now, thanks.
> diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
> index 3cb41d0..a38e9ee 100644
> --- a/drivers/mfd/max77686.c
> +++ b/drivers/mfd/max77686.c
> @@ -240,10 +240,50 @@ static const struct i2c_device_id max77686_i2c_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, max77686_i2c_id);
>
> +#ifdef CONFIG_PM_SLEEP
> +static int max77686_suspend(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(max77686->irq);
> +
> + /*
> + * IRQ must be disabled during suspend because if it happens
> + * while suspended it will be handled before resuming I2C.
> + *
> + * When device is woken up from suspend (e.g. by RTC wake alarm),
> + * an interrupt occurs before resuming I2C bus controller.
> + * Interrupt handler tries to read registers but this read
> + * will fail because I2C is still suspended.
> + */
> + disable_irq(max77686->irq);
> +
> + return 0;
> +}
> +
> +static int max77686_resume(struct device *dev)
> +{
> + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> + struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(max77686->irq);
> +
> + enable_irq(max77686->irq);
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static SIMPLE_DEV_PM_OPS(max77686_pm, max77686_suspend, max77686_resume);
> +
> static struct i2c_driver max77686_i2c_driver = {
> .driver = {
> .name = "max77686",
> .owner = THIS_MODULE,
> + .pm = &max77686_pm,
> .of_match_table = of_match_ptr(max77686_pmic_dt_match),
> },
> .probe = max77686_i2c_probe,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists