| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140718111121.7a400529@lxbuild.skidata.net>
Date: Fri, 18 Jul 2014 11:11:21 +0200
From: Richard Leitner <richard.leitner@...data.com>
To: <balbi@...com>, <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] usb: gadget: serial: replace {V,}DBG macro with dev_{v,}dbg
Replace the VDBG and DBG macro with the kernels "proper" debug macros
(dev_vdbg and dev_dbg) in f_acm.c, f_obex.c & f_serial.c
Signed-off-by: Richard Leitner <richard.leitner@...data.com>
---
drivers/usb/gadget/f_acm.c | 41 ++++++++++++++++++++++++-----------------
drivers/usb/gadget/f_obex.c | 22 ++++++++++++++--------
drivers/usb/gadget/f_serial.c | 11 +++++++----
3 files changed, 45 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index ab1065a..beac376 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -313,14 +313,14 @@ static void acm_complete_set_line_coding(struct usb_ep *ep,
struct usb_composite_dev *cdev = acm->port.func.config->cdev;
if (req->status != 0) {
- DBG(cdev, "acm ttyGS%d completion, err %d\n",
+ dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
acm->port_num, req->status);
return;
}
/* normal completion */
if (req->actual != sizeof(acm->port_line_coding)) {
- DBG(cdev, "acm ttyGS%d short resp, len %d\n",
+ dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
acm->port_num, req->actual);
usb_ep_set_halt(ep);
} else {
@@ -397,14 +397,16 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
default:
invalid:
- VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ dev_vdbg(&cdev->gadget->dev,
+ "invalid control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
}
/* respond with data transfer or status phase? */
if (value >= 0) {
- DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
+ dev_dbg(&cdev->gadget->dev,
+ "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
acm->port_num, ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
req->zero = 0;
@@ -428,10 +430,12 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
if (intf == acm->ctrl_id) {
if (acm->notify->driver_data) {
- VDBG(cdev, "reset acm control interface %d\n", intf);
+ dev_vdbg(&cdev->gadget->dev,
+ "reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
} else {
- VDBG(cdev, "init acm ctrl interface %d\n", intf);
+ dev_vdbg(&cdev->gadget->dev,
+ "init acm ctrl interface %d\n", intf);
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
return -EINVAL;
}
@@ -440,11 +444,13 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
} else if (intf == acm->data_id) {
if (acm->port.in->driver_data) {
- DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "reset acm ttyGS%d\n", acm->port_num);
gserial_disconnect(&acm->port);
}
if (!acm->port.in->desc || !acm->port.out->desc) {
- DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "activate acm ttyGS%d\n", acm->port_num);
if (config_ep_by_speed(cdev->gadget, f,
acm->port.in) ||
config_ep_by_speed(cdev->gadget, f,
@@ -467,7 +473,7 @@ static void acm_disable(struct usb_function *f)
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
- DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
+ dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
gserial_disconnect(&acm->port);
usb_ep_disable(acm->notify);
acm->notify->driver_data = NULL;
@@ -537,8 +543,8 @@ static int acm_notify_serial_state(struct f_acm *acm)
spin_lock(&acm->lock);
if (acm->notify_req) {
- DBG(cdev, "acm ttyGS%d serial state %04x\n",
- acm->port_num, acm->serial_state);
+ dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
+ acm->port_num, acm->serial_state);
status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
0, &acm->serial_state, sizeof(acm->serial_state));
} else {
@@ -691,12 +697,13 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
if (status)
goto fail;
- DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
- acm->port_num,
- gadget_is_superspeed(c->cdev->gadget) ? "super" :
- gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
- acm->port.in->name, acm->port.out->name,
- acm->notify->name);
+ dev_dbg(&cdev->gadget->dev,
+ "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ acm->port_num,
+ gadget_is_superspeed(c->cdev->gadget) ? "super" :
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ acm->port.in->name, acm->port.out->name,
+ acm->notify->name);
return 0;
fail:
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index aebae18..29a5496 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -200,19 +200,22 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
if (alt != 0)
goto fail;
/* NOP */
- DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "reset obex ttyGS%d control\n", obex->port_num);
} else if (intf == obex->data_id) {
if (alt > 1)
goto fail;
if (obex->port.in->driver_data) {
- DBG(cdev, "reset obex ttyGS%d\n", obex->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "reset obex ttyGS%d\n", obex->port_num);
gserial_disconnect(&obex->port);
}
if (!obex->port.in->desc || !obex->port.out->desc) {
- DBG(cdev, "init obex ttyGS%d\n", obex->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "init obex ttyGS%d\n", obex->port_num);
if (config_ep_by_speed(cdev->gadget, f,
obex->port.in) ||
config_ep_by_speed(cdev->gadget, f,
@@ -224,7 +227,8 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
}
if (alt == 1) {
- DBG(cdev, "activate obex ttyGS%d\n", obex->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "activate obex ttyGS%d\n", obex->port_num);
gserial_connect(&obex->port, obex->port_num);
}
@@ -252,7 +256,7 @@ static void obex_disable(struct usb_function *f)
struct f_obex *obex = func_to_obex(f);
struct usb_composite_dev *cdev = f->config->cdev;
- DBG(cdev, "obex ttyGS%d disable\n", obex->port_num);
+ dev_dbg(&cdev->gadget->dev, "obex ttyGS%d disable\n", obex->port_num);
gserial_disconnect(&obex->port);
}
@@ -269,7 +273,8 @@ static void obex_connect(struct gserial *g)
status = usb_function_activate(&g->func);
if (status)
- DBG(cdev, "obex ttyGS%d function activate --> %d\n",
+ dev_dbg(&cdev->gadget->dev,
+ "obex ttyGS%d function activate --> %d\n",
obex->port_num, status);
}
@@ -284,7 +289,8 @@ static void obex_disconnect(struct gserial *g)
status = usb_function_deactivate(&g->func);
if (status)
- DBG(cdev, "obex ttyGS%d function deactivate --> %d\n",
+ dev_dbg(&cdev->gadget->dev,
+ "obex ttyGS%d function deactivate --> %d\n",
obex->port_num, status);
}
@@ -383,7 +389,7 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
obex->can_activate = true;
- DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
+ dev_dbg(&cdev->gadget->dev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
obex->port_num,
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
obex->port.in->name, obex->port.out->name);
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 9ecbcbf..faa3de0 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -155,11 +155,13 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
/* we know alt == 0, so this is an activation or a reset */
if (gser->port.in->driver_data) {
- DBG(cdev, "reset generic ttyGS%d\n", gser->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "reset generic ttyGS%d\n", gser->port_num);
gserial_disconnect(&gser->port);
}
if (!gser->port.in->desc || !gser->port.out->desc) {
- DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "activate generic ttyGS%d\n", gser->port_num);
if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
gser->port.in->desc = NULL;
@@ -176,7 +178,8 @@ static void gser_disable(struct usb_function *f)
struct f_gser *gser = func_to_gser(f);
struct usb_composite_dev *cdev = f->config->cdev;
- DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num);
+ dev_dbg(&cdev->gadget->dev,
+ "generic ttyGS%d deactivated\n", gser->port_num);
gserial_disconnect(&gser->port);
}
@@ -239,7 +242,7 @@ static int gser_bind(struct usb_configuration *c, struct usb_function *f)
gser_ss_function);
if (status)
goto fail;
- DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
+ dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
gser->port_num,
gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists