linux-kernel - Re: [PATCH v10 4/8] ata: libahci: allow to use multiple PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140718151745.0b0114a9@ipc1.ka-ro>
Date:	Fri, 18 Jul 2014 15:17:45 +0200
From:	Lothar Waßmann <LW@...O-electronics.de>
To:	Antoine Ténart 
	<antoine.tenart@...e-electrons.com>
Cc:	sebastian.hesselbarth@...il.com, tj@...nel.org, kishon@...com,
	thomas.petazzoni@...e-electrons.com, zmxu@...vell.com,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-ide@...r.kernel.org, alexandre.belloni@...e-electrons.com,
	jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v10 4/8] ata: libahci: allow to use multiple PHYs

Hi,

Antoine Ténart wrote:
> The current implementation of the libahci does not allow to use multiple
> PHYs. This patch adds the support of multiple PHYs by the libahci while
> keeping the old bindings valid for device tree compatibility.
> 
> This introduce a new way of defining SATA ports in the device tree, with
> one port per sub-node. This as the advantage of allowing a per port
> configuration. Because some ports may be accessible but disabled in the
> device tree, the port_map mask is computed automatically when using
> this.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart@...e-electrons.com>
> ---
>  drivers/ata/ahci.h             |   3 +-
>  drivers/ata/libahci_platform.c | 179 ++++++++++++++++++++++++++++++++---------
>  2 files changed, 142 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index cb8d58926851..b0ea7b077d6e 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -332,7 +332,8 @@ struct ahci_host_priv {
>  	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
>  	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
>  	struct regulator	*target_pwr;	/* Optional */
> -	struct phy		*phy;		/* If platform uses phy */
> +	struct phy		**phys;		/* If platform uses phys */
> +	unsigned		nphys;		/* Number of phys */
>  	void			*plat_data;	/* Other platform data */
>  	/*
>  	 * Optional ahci_start_engine override, if not set this gets set to the
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index db9b90d876dd..2c2439b4101d 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -39,6 +39,61 @@ static struct scsi_host_template ahci_platform_sht = {
>  };
>  
>  /**
> + * ahci_platform_enable_phys - Enable PHYs
> + * @hpriv: host private area to store config values
> + *
> + * This function enables all the PHYs found in hpriv->phys, if any.
> + * If a PHY fails to be enabled, it disables all the PHYs already
> + * enabled in reverse order and returns an error.
> + *
> + * RETURNS:
> + * 0 on success otherwise a negative error code
> + */
> +int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
> +{
> +	int i, rc = 0;
> +
You shouldn't have to initialize rc here, or does your gcc falsely
complain about an uninitialized variable if you don't?

> +	for (i = 0; i < hpriv->nphys; i++) {
> +		rc = phy_init(hpriv->phys[i]);
> +		if (rc)
> +			goto disable_phys;
> +
> +		rc = phy_power_on(hpriv->phys[i]);
> +		if (rc) {
> +			phy_exit(hpriv->phys[i]);
> +			goto disable_phys;
> +		}
> +	}
> +
> +	return 0;
> +
> +disable_phys:
> +	while (--i >= 0) {
> +		phy_power_off(hpriv->phys[i]);
> +		phy_exit(hpriv->phys[i]);
> +	}
> +	return rc;
> +}


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@...o-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/