linux-kernel - [PATCH 17/30] e1000: remove unnecessary break after return

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1405866332-24652-8-git-send-email-fabf@skynet.be>
Date:	Sun, 20 Jul 2014 16:25:18 +0200
From:	Fabian Frederick <fabf@...net.be>
To:	linux-kernel@...r.kernel.org
Cc:	davem@...emloft.net, joe@...ches.com,
	Fabian Frederick <fabf@...net.be>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Bruce Allan <bruce.w.allan@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Greg Rose <gregory.v.rose@...el.com>,
	Alex Duyck <alexander.h.duyck@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	Mitch Williams <mitch.a.williams@...el.com>,
	Linux NICS <linux.nics@...el.com>,
	e1000-devel@...ts.sourceforge.net, netdev@...r.kernel.org
Subject: [PATCH 17/30] e1000: remove unnecessary break after return

Signed-off-by: Fabian Frederick <fabf@...net.be>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 3 ---
 drivers/net/ethernet/intel/e1000/e1000_hw.c      | 2 --
 2 files changed, 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index d50f78a..cca5bca 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1316,7 +1316,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_82547:
 	case e1000_82547_rev_2:
 		return e1000_integrated_phy_loopback(adapter);
-		break;
 	default:
 		/* Default PHY loopback work is to read the MII
 		 * control register and assert bit 14 (loopback mode).
@@ -1325,7 +1324,6 @@ static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
 		phy_reg |= MII_CR_LOOPBACK;
 		e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
 		return 0;
-		break;
 	}
 
 	return 8;
@@ -1344,7 +1342,6 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		case e1000_82545_rev_3:
 		case e1000_82546_rev_3:
 			return e1000_set_phy_loopback(adapter);
-			break;
 		default:
 			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
index e9b07cc..1acf503 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c
@@ -902,7 +902,6 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
 	default:
 		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
-		break;
 	}
 
 	/* Since auto-negotiation is enabled, take the link out of reset (the
@@ -5041,7 +5040,6 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 			break;
 		default:
 			return -E1000_ERR_PHY;
-			break;
 		}
 	} else if (hw->phy_type == e1000_phy_igp) {	/* For IGP PHY */
 		u16 cur_agc_value;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/