lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <53CBEB6B.7070507@kernel.org> Date: Sun, 20 Jul 2014 17:16:43 +0100 From: Jonathan Cameron <jic23@...nel.org> To: Josef Gajdusek <atx@...lax.net>, linux-iio@...r.kernel.org CC: devel@...verdev.osuosl.org, gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org, pmeerw@...erw.net, dan.carpenter@...cle.com, lars@...afoo.de Subject: Re: [PATCH v4 (staging-next) 1/5] staging:iio:hmc5843: Added regmap support On 16/07/14 14:07, Josef Gajdusek wrote: > This patch changes hmc5843.c to use regmap. This provides transparent caching > to the code as well as abstraction necessary to add support for SPI-based > hmc5983. > > Signed-off-by: Josef Gajdusek <atx@....name> Applied to the togreg branch of iio.git. Will be initially pushed out as testing for the autobuilders to mess with it. Thanks, > --- > drivers/staging/iio/magnetometer/Kconfig | 1 + > drivers/staging/iio/magnetometer/hmc5843.c | 140 +++++++++++++++++++---------- > 2 files changed, 96 insertions(+), 45 deletions(-) > > diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig > index 34634da..ad88d61 100644 > --- a/drivers/staging/iio/magnetometer/Kconfig > +++ b/drivers/staging/iio/magnetometer/Kconfig > @@ -8,6 +8,7 @@ config SENSORS_HMC5843 > depends on I2C > select IIO_BUFFER > select IIO_TRIGGERED_BUFFER > + select REGMAP_I2C > help > Say Y here to add support for the Honeywell HMC5843, HMC5883 and > HMC5883L 3-Axis Magnetometer (digital compass). > diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c > index f595fdc..6f06f98 100644 > --- a/drivers/staging/iio/magnetometer/hmc5843.c > +++ b/drivers/staging/iio/magnetometer/hmc5843.c > @@ -21,6 +21,7 @@ > > #include <linux/module.h> > #include <linux/i2c.h> > +#include <linux/regmap.h> > #include <linux/iio/iio.h> > #include <linux/iio/sysfs.h> > #include <linux/iio/trigger_consumer.h> > @@ -34,6 +35,7 @@ > #define HMC5843_DATA_OUT_MSB_REGS 0x03 > #define HMC5843_STATUS_REG 0x09 > #define HMC5843_ID_REG 0x0a > +#define HMC5843_ID_END 0x0c > > enum hmc5843_ids { > HMC5843_ID, > @@ -49,6 +51,7 @@ enum hmc5843_ids { > #define HMC5843_RANGE_GAIN_OFFSET 0x05 > #define HMC5843_RANGE_GAIN_DEFAULT 0x01 > #define HMC5843_RANGE_GAINS 8 > +#define HMC5843_RANGE_GAIN_MASK 0xe0 > > /* Device status */ > #define HMC5843_DATA_READY 0x01 > @@ -68,6 +71,7 @@ enum hmc5843_ids { > #define HMC5843_RATE_OFFSET 0x02 > #define HMC5843_RATE_DEFAULT 0x04 > #define HMC5843_RATES 7 > +#define HMC5843_RATE_MASK 0x1c > > /* Device measurement configuration */ > #define HMC5843_MEAS_CONF_NORMAL 0x00 > @@ -121,10 +125,7 @@ struct hmc5843_chip_info { > struct hmc5843_data { > struct i2c_client *client; > struct mutex lock; > - u8 rate; > - u8 meas_conf; > - u8 operating_mode; > - u8 range; > + struct regmap *regmap; > const struct hmc5843_chip_info *variant; > __be16 buffer[8]; /* 3x 16-bit channels + padding + 64-bit timestamp */ > }; > @@ -135,10 +136,8 @@ static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) > int ret; > > mutex_lock(&data->lock); > - ret = i2c_smbus_write_byte_data(data->client, HMC5843_MODE_REG, > - operating_mode & HMC5843_MODE_MASK); > - if (ret >= 0) > - data->operating_mode = operating_mode; > + ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG, > + HMC5843_MODE_MASK, operating_mode); > mutex_unlock(&data->lock); > > return ret; > @@ -146,15 +145,15 @@ static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) > > static int hmc5843_wait_measurement(struct hmc5843_data *data) > { > - s32 result; > int tries = 150; > + int val; > + int ret; > > while (tries-- > 0) { > - result = i2c_smbus_read_byte_data(data->client, > - HMC5843_STATUS_REG); > - if (result < 0) > - return result; > - if (result & HMC5843_DATA_READY) > + ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val); > + if (ret < 0) > + return ret; > + if (val & HMC5843_DATA_READY) > break; > msleep(20); > } > @@ -171,20 +170,20 @@ static int hmc5843_wait_measurement(struct hmc5843_data *data) > static int hmc5843_read_measurement(struct hmc5843_data *data, > int idx, int *val) > { > - s32 result; > __be16 values[3]; > + int ret; > > mutex_lock(&data->lock); > - result = hmc5843_wait_measurement(data); > - if (result < 0) { > + ret = hmc5843_wait_measurement(data); > + if (ret < 0) { > mutex_unlock(&data->lock); > - return result; > + return ret; > } > - result = i2c_smbus_read_i2c_block_data(data->client, > - HMC5843_DATA_OUT_MSB_REGS, sizeof(values), (u8 *) values); > + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, > + values, sizeof(values)); > mutex_unlock(&data->lock); > - if (result < 0) > - return -EINVAL; > + if (ret < 0) > + return ret; > > *val = sign_extend32(be16_to_cpu(values[idx]), 15); > return IIO_VAL_INT; > @@ -208,16 +207,13 @@ static int hmc5843_read_measurement(struct hmc5843_data *data, > * and BN. > * > */ > -static s32 hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) > +static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) > { > int ret; > > mutex_lock(&data->lock); > - ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A, > - (meas_conf & HMC5843_MEAS_CONF_MASK) | > - (data->rate << HMC5843_RATE_OFFSET)); > - if (ret >= 0) > - data->meas_conf = meas_conf; > + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, > + HMC5843_MEAS_CONF_MASK, meas_conf); > mutex_unlock(&data->lock); > > return ret; > @@ -228,7 +224,15 @@ static ssize_t hmc5843_show_measurement_configuration(struct device *dev, > char *buf) > { > struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); > - return sprintf(buf, "%d\n", data->meas_conf); > + int val; > + int ret; > + > + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val); > + if (ret) > + return ret; > + val &= HMC5843_MEAS_CONF_MASK; > + > + return sprintf(buf, "%d\n", val); > } > > static ssize_t hmc5843_set_measurement_configuration(struct device *dev, > @@ -282,10 +286,8 @@ static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate) > int ret; > > mutex_lock(&data->lock); > - ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_A, > - data->meas_conf | (rate << HMC5843_RATE_OFFSET)); > - if (ret >= 0) > - data->rate = rate; > + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, > + HMC5843_RATE_MASK, rate << HMC5843_RATE_OFFSET); > mutex_unlock(&data->lock); > > return ret; > @@ -309,10 +311,9 @@ static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range) > int ret; > > mutex_lock(&data->lock); > - ret = i2c_smbus_write_byte_data(data->client, HMC5843_CONFIG_REG_B, > - range << HMC5843_RANGE_GAIN_OFFSET); > - if (ret >= 0) > - data->range = range; > + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B, > + HMC5843_RANGE_GAIN_MASK, > + range << HMC5843_RANGE_GAIN_OFFSET); > mutex_unlock(&data->lock); > > return ret; > @@ -358,17 +359,27 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev, > int *val, int *val2, long mask) > { > struct hmc5843_data *data = iio_priv(indio_dev); > + int rval; > + int ret; > > switch (mask) { > case IIO_CHAN_INFO_RAW: > return hmc5843_read_measurement(data, chan->scan_index, val); > case IIO_CHAN_INFO_SCALE: > + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval); > + if (ret < 0) > + return ret; > + rval >>= HMC5843_RANGE_GAIN_OFFSET; > *val = 0; > - *val2 = data->variant->regval_to_nanoscale[data->range]; > + *val2 = data->variant->regval_to_nanoscale[rval]; > return IIO_VAL_INT_PLUS_NANO; > case IIO_CHAN_INFO_SAMP_FREQ: > - *val = data->variant->regval_to_samp_freq[data->rate][0]; > - *val2 = data->variant->regval_to_samp_freq[data->rate][1]; > + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval); > + if (ret < 0) > + return ret; > + rval >>= HMC5843_RATE_OFFSET; > + *val = data->variant->regval_to_samp_freq[rval][0]; > + *val2 = data->variant->regval_to_samp_freq[rval][1]; > return IIO_VAL_INT_PLUS_MICRO; > } > return -EINVAL; > @@ -426,9 +437,9 @@ static irqreturn_t hmc5843_trigger_handler(int irq, void *p) > goto done; > } > > - ret = i2c_smbus_read_i2c_block_data(data->client, > - HMC5843_DATA_OUT_MSB_REGS, 3 * sizeof(__be16), > - (u8 *) data->buffer); > + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, > + data->buffer, 3 * sizeof(__be16)); > + > mutex_unlock(&data->lock); > if (ret < 0) > goto done; > @@ -508,8 +519,8 @@ static int hmc5843_init(struct hmc5843_data *data) > int ret; > u8 id[3]; > > - ret = i2c_smbus_read_i2c_block_data(data->client, HMC5843_ID_REG, > - sizeof(id), id); > + ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG, > + id, ARRAY_SIZE(id)); > if (ret < 0) > return ret; > if (id[0] != 'H' || id[1] != '4' || id[2] != '3') { > @@ -539,6 +550,44 @@ static const struct iio_info hmc5843_info = { > > static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; > > +static const struct regmap_range hmc5843_readable_ranges[] = { > + regmap_reg_range(0, HMC5843_ID_END), > +}; > + > +static struct regmap_access_table hmc5843_readable_table = { > + .yes_ranges = hmc5843_readable_ranges, > + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), > +}; > + > +static const struct regmap_range hmc5843_writable_ranges[] = { > + regmap_reg_range(0, HMC5843_MODE_REG), > +}; > + > +static struct regmap_access_table hmc5843_writable_table = { > + .yes_ranges = hmc5843_writable_ranges, > + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), > +}; > + > +static const struct regmap_range hmc5843_volatile_ranges[] = { > + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), > +}; > + > +static struct regmap_access_table hmc5843_volatile_table = { > + .yes_ranges = hmc5843_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), > +}; > + > +static struct regmap_config hmc5843_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .rd_table = &hmc5843_readable_table, > + .wr_table = &hmc5843_writable_table, > + .volatile_table = &hmc5843_volatile_table, > + > + .cache_type = REGCACHE_RBTREE, > +}; > + > static int hmc5843_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -554,6 +603,7 @@ static int hmc5843_probe(struct i2c_client *client, > data = iio_priv(indio_dev); > data->client = client; > data->variant = &hmc5843_chip_info_tbl[id->driver_data]; > + data->regmap = devm_regmap_init_i2c(client, &hmc5843_regmap_config); > mutex_init(&data->lock); > > i2c_set_clientdata(client, indio_dev); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists