| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Jul 2014 17:12:17 +0300
From: Sakari Ailus <sakari.ailus@....fi>
To: Jacek Anaszewski <j.anaszewski@...sung.com>,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
CC: kyungmin.park@...sung.com, b.zolnierkie@...sung.com,
Andrzej Hajda <a.hajda@...sung.com>,
Bryan Wu <cooloney@...il.com>,
Richard Purdie <rpurdie@...ys.net>,
SangYoung Son <hello.son@...sung.com>,
Samuel Ortiz <sameo@...ux.intel.com>
Subject: Re: [PATCH/RFC v4 16/21] leds: Add support for max77693 mfd flash
cell
Hi Jacek,
Thanks for the patchset.
Jacek Anaszewski wrote:
> This patch adds led-flash support to Maxim max77693 chipset.
> A device can be exposed to user space through LED subsystem
> sysfs interface or through V4L2 subdevice when the support
> for V4L2 Flash sub-devices is enabled. Device supports up to
> two leds which can work in flash and torch mode. Leds can
> be triggered externally or by software.
>
> Signed-off-by: Jacek Anaszewski <j.anaszewski@...sung.com>
> Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
> Acked-by: Lee Jones <lee.jones@...aro.org>
> Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
> Cc: Bryan Wu <cooloney@...il.com>
> Cc: Richard Purdie <rpurdie@...ys.net>
> Cc: SangYoung Son <hello.son@...sung.com>
> Cc: Samuel Ortiz <sameo@...ux.intel.com>
> ---
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-max77693.c | 1070 ++++++++++++++++++++++++++++++++++++++++++
> drivers/mfd/max77693.c | 5 +-
> include/linux/mfd/max77693.h | 40 ++
> 5 files changed, 1124 insertions(+), 1 deletion(-)
> create mode 100644 drivers/leds/leds-max77693.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 5032c6f..794055e 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -457,6 +457,15 @@ config LEDS_TCA6507
> LED driver chips accessed via the I2C bus.
> Driver support brightness control and hardware-assisted blinking.
>
> +config LEDS_MAX77693
> + tristate "LED support for MAX77693 Flash"
> + depends on LEDS_CLASS_FLASH
> + depends on MFD_MAX77693
> + help
> + This option enables support for the flash part of the MAX77693
> + multifunction device. It has build in control for two leds in flash
> + and torch mode.
> +
> config LEDS_MAX8997
> tristate "LED support for MAX8997 PMIC"
> depends on LEDS_CLASS && MFD_MAX8997
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 237c5ba..da1a4ba 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
> obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
> +obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
> obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
> new file mode 100644
> index 0000000..38a2398
> --- /dev/null
> +++ b/drivers/leds/leds-max77693.c
> @@ -0,0 +1,1070 @@
> +/*
> + * LED Flash Class driver for the flash cell of max77693 mfd.
> + *
> + * Copyright (C) 2014, Samsung Electronics Co., Ltd.
> + *
> + * Authors: Jacek Anaszewski <j.anaszewski@...sung.com>
> + * Andrzej Hajda <a.hajda@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <asm/div64.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/led-flash-manager.h>
> +#include <linux/mfd/max77693.h>
> +#include <linux/mfd/max77693-private.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include <media/v4l2-flash.h>
> +
> +#define MAX77693_LED_NAME_1 "max77693-flash_1"
> +#define MAX77693_LED_NAME_2 "max77693-flash_2"
> +
> +#define MAX77693_TORCH_IOUT_BITS 4
> +
> +#define MAX77693_TORCH_NO_TIMER 0x40
> +#define MAX77693_FLASH_TIMER_LEVEL 0x80
> +
> +#define MAX77693_FLASH_EN_OFF 0
> +#define MAX77693_FLASH_EN_FLASH 1
> +#define MAX77693_FLASH_EN_TORCH 2
> +#define MAX77693_FLASH_EN_ON 3
> +
> +#define MAX77693_FLASH_EN1_SHIFT 6
> +#define MAX77693_FLASH_EN2_SHIFT 4
> +#define MAX77693_TORCH_EN1_SHIFT 2
> +#define MAX77693_TORCH_EN2_SHIFT 0
Which registers are these definitions related to? Could they be defined
next to the registers instead?
You could parameterise these macros, e.g.
#define MAX77693_FLASH_EN_SHIFT(a) (6 - ((a) - 1) * 2)
> +#define MAX77693_FLASH_LOW_BATTERY_EN 0x80
> +
> +#define MAX77693_FLASH_BOOST_FIXED 0x04
> +#define MAX77693_FLASH_BOOST_LEDNUM_2 0x80
> +
> +#define MAX77693_FLASH_TIMEOUT_MIN 62500
> +#define MAX77693_FLASH_TIMEOUT_MAX 1000000
> +#define MAX77693_FLASH_TIMEOUT_STEP 62500
> +
> +#define MAX77693_TORCH_TIMEOUT_MIN 262000
> +#define MAX77693_TORCH_TIMEOUT_MAX 15728000
> +
> +#define MAX77693_FLASH_IOUT_MIN 15625
> +#define MAX77693_FLASH_IOUT_MAX_1LED 1000000
> +#define MAX77693_FLASH_IOUT_MAX_2LEDS 625000
> +#define MAX77693_FLASH_IOUT_STEP 15625
> +
> +#define MAX77693_TORCH_IOUT_MIN 15625
> +#define MAX77693_TORCH_IOUT_MAX 250000
> +#define MAX77693_TORCH_IOUT_STEP 15625
> +
> +#define MAX77693_FLASH_VSYS_MIN 2400
> +#define MAX77693_FLASH_VSYS_MAX 3400
> +#define MAX77693_FLASH_VSYS_STEP 33
> +
> +#define MAX77693_FLASH_VOUT_MIN 3300
> +#define MAX77693_FLASH_VOUT_MAX 5500
> +#define MAX77693_FLASH_VOUT_STEP 25
> +#define MAX77693_FLASH_VOUT_RMIN 0x0c
> +
> +#define MAX77693_LED_STATUS_FLASH_ON (1 << 3)
> +#define MAX77693_LED_STATUS_TORCH_ON (1 << 2)
> +
> +#define MAX77693_LED_FLASH_INT_FLED2_OPEN (1 << 0)
> +#define MAX77693_LED_FLASH_INT_FLED2_SHORT (1 << 1)
> +#define MAX77693_LED_FLASH_INT_FLED1_OPEN (1 << 2)
> +#define MAX77693_LED_FLASH_INT_FLED1_SHORT (1 << 3)
> +#define MAX77693_LED_FLASH_INT_OVER_CURRENT (1 << 4)
> +
> +#define MAX77693_MODE_OFF 0
> +#define MAX77693_MODE_FLASH1 (1 << 0)
> +#define MAX77693_MODE_FLASH2 (1 << 1)
> +#define MAX77693_MODE_TORCH1 (1 << 2)
> +#define MAX77693_MODE_TORCH2 (1 << 3)
> +#define MAX77693_MODE_FLASH_EXTERNAL1 (1 << 4)
> +#define MAX77693_MODE_FLASH_EXTERNAL2 (1 << 5)
> +
> +enum {
> + FLED1,
> + FLED2
> +};
> +
> +enum {
> + FLASH,
> + TORCH
> +};
> +
> +struct max77693_led {
> + struct regmap *regmap;
> + struct platform_device *pdev;
> + struct max77693_led_platform_data *pdata;
> + struct mutex lock;
> +
> + struct led_classdev_flash ldev1;
> + struct work_struct work1_brightness_set;
> + struct v4l2_flash *v4l2_flash1;
> +
> + struct led_classdev_flash ldev2;
> + struct work_struct work2_brightness_set;
> + struct v4l2_flash *v4l2_flash2;
> +
> + unsigned int torch1_brightness;
> + unsigned int torch2_brightness;
> + unsigned int flash1_timeout;
> + unsigned int flash2_timeout;
Could you use e.g. an array of structs instead? You could remove a lot
of redundant code operating on the other led.
> + unsigned int current_flash_timeout;
> + unsigned int mode_flags;
> + u8 torch_iout_reg;
> + bool iout_joint;
> +};
...
> +static int max77693_led_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
> + struct max77693_led *led;
> + struct max77693_led_platform_data *p;
> + int ret;
> +
> + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + led->pdev = pdev;
> + led->regmap = iodev->regmap;
> + platform_set_drvdata(pdev, led);
> + ret = max77693_led_get_platform_data(led);
> + if (ret < 0)
> + return -EINVAL;
> +
> + p = led->pdata;
> + mutex_init(&led->lock);
> +
> + if (p->num_leds == 1 && p->fleds[FLED1] && p->fleds[FLED2])
> + led->iout_joint = true;
> +
> + ret = max77693_setup(led);
> + if (ret < 0)
> + return ret;
goto err_register_led1;
> + if (led->iout_joint || p->fleds[FLED1]) {
> + ret = max77693_register_led1(led);
> + if (ret < 0)
> + goto err_register_led1;
> + }
> +
> + if (!led->iout_joint && p->fleds[FLED2]) {
> + ret = max77693_register_led2(led);
> + if (ret < 0)
> + goto err_register_led2;
> + }
> +
> + return 0;
> +
> +err_register_led2:
> + if (!p->fleds[FLED1])
> + goto err_register_led1;
> + v4l2_flash_release(led->v4l2_flash1);
> + led_classdev_flash_unregister(&led->ldev1);
> +err_register_led1:
> + mutex_destroy(&led->lock);
> +
> + return ret;
> +}
...
--
Kind regards,
Sakari Ailus
sakari.ailus@....fi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists