lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 22 Jul 2014 16:26:33 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	<gregkh@...uxfoundation.org>
CC:	<kishon@...com>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 10/28] phy: add hix5hd2-sata-phy driver

From: Jiancheng Xue <xuejiancheng@...wei.com>

Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc.

Signed-off-by: Jiancheng Xue <xuejiancheng@...wei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@...aro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/phy/Kconfig            |    8 ++
 drivers/phy/Makefile           |    1 +
 drivers/phy/phy-hix5hd2-sata.c |  192 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 drivers/phy/phy-hix5hd2-sata.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 64b98d2..30c82fc 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA
 	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 	  port to accept one SATA device.
 
+config PHY_HIX5HD2_SATA
+	tristate "HIX5HD2 SATA PHY Driver"
+	depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
 config PHY_SUN4I_USB
 	tristate "Allwinner sunxi SoC USB PHY driver"
 	depends on ARCH_SUNXI && HAS_IOMEM && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index b4f1d57..54f04d0 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
 phy-exynos-usb2-y			+= phy-samsung-usb2.o
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c
new file mode 100644
index 0000000..d442834
--- /dev/null
+++ b/drivers/phy/phy-hix5hd2-sata.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SATA_PHY0_CTLL		0xa0
+#define MPLL_MULTIPLIER_SHIFT	1
+#define MPLL_MULTIPLIER_MASK	0xfe
+#define MPLL_MULTIPLIER_50M	0x3c
+#define MPLL_MULTIPLIER_100M	0x1e
+#define PHY_RESET		BIT(0)
+#define REF_SSP_EN		BIT(9)
+#define SSC_EN			BIT(10)
+#define REF_USE_PAD		BIT(23)
+
+#define SATA_PORT_PHYCTL	0x174
+#define SPEED_MODE_MASK		0x6f0000
+#define HALF_RATE_SHIFT		16
+#define PHY_CONFIG_SHIFT	18
+#define GEN2_EN_SHIFT		21
+#define SPEED_CTRL		BIT(20)
+
+#define SATA_PORT_PHYCTL1	0x148
+#define AMPLITUDE_MASK		0x3ffffe
+#define AMPLITUDE_GEN3		0x68
+#define AMPLITUDE_GEN3_SHIFT	15
+#define AMPLITUDE_GEN2		0x56
+#define AMPLITUDE_GEN2_SHIFT	8
+#define AMPLITUDE_GEN1		0x56
+#define AMPLITUDE_GEN1_SHIFT	1
+
+#define SATA_PORT_PHYCTL2	0x14c
+#define PREEMPH_MASK		0x3ffff
+#define PREEMPH_GEN3		0x20
+#define PREEMPH_GEN3_SHIFT	12
+#define PREEMPH_GEN2		0x15
+#define PREEMPH_GEN2_SHIFT	6
+#define PREEMPH_GEN1		0x5
+#define PREEMPH_GEN1_SHIFT	0
+
+struct hix5hd2_priv {
+	void __iomem	*base;
+	struct regmap	*peri_ctrl;
+};
+
+enum phy_speed_mode {
+	SPEED_MODE_GEN1 = 0,
+	SPEED_MODE_GEN2 = 1,
+	SPEED_MODE_GEN3 = 2,
+};
+
+static int hix5hd2_sata_phy_init(struct phy *phy)
+{
+	struct hix5hd2_priv *priv = phy_get_drvdata(phy);
+	u32 val, data[2];
+	int ret;
+
+	if (priv->peri_ctrl) {
+		ret = of_property_read_u32_array(phy->dev.of_node,
+						 "hisilicon,power-reg",
+						 &data[0], 2);
+		if (ret) {
+			dev_err(&phy->dev, "Fail read hisilicon,power-reg\n");
+			return ret;
+		}
+
+		regmap_update_bits(priv->peri_ctrl, data[0],
+				   BIT(data[1]), BIT(data[1]));
+	}
+
+	/* reset phy */
+	val = readl_relaxed(priv->base + SATA_PHY0_CTLL);
+	val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD);
+	val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT |
+	       REF_SSP_EN | PHY_RESET;
+	writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+	msleep(20);
+	val &= ~PHY_RESET;
+	writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
+
+	val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1);
+	val &= ~AMPLITUDE_MASK;
+	val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT |
+	       AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT |
+	       AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT;
+	writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1);
+
+	val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2);
+	val &= ~PREEMPH_MASK;
+	val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT |
+	       PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT |
+	       PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT;
+	writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2);
+
+	/* ensure PHYCTRL setting takes effect */
+	val = readl_relaxed(priv->base + SATA_PORT_PHYCTL);
+	val &= ~SPEED_MODE_MASK;
+	val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT |
+	       SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT |
+	       SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL;
+	writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+	msleep(20);
+	val &= ~SPEED_MODE_MASK;
+	val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT |
+	       SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT |
+	       SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL;
+	writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+	val &= ~(SPEED_MODE_MASK | SPEED_CTRL);
+	val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT |
+	       SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT |
+	       SPEED_MODE_GEN2 << GEN2_EN_SHIFT;
+	writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
+
+	return 0;
+}
+
+static struct phy_ops hix5hd2_sata_phy_ops = {
+	.init		= hix5hd2_sata_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy *phy;
+	struct hix5hd2_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!priv->base)
+		return -ENOMEM;
+
+	priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,peripheral-syscon");
+	if (IS_ERR(priv->peri_ctrl))
+		priv->peri_ctrl = NULL;
+
+	phy = devm_phy_create(dev, &hix5hd2_sata_phy_ops, NULL);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id hix5hd2_sata_phy_of_match[] = {
+	{.compatible = "hisilicon,hix5hd2-sata-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match);
+
+static struct platform_driver hix5hd2_sata_phy_driver = {
+	.probe	= hix5hd2_sata_phy_probe,
+	.driver = {
+		.name	= "hix5hd2-sata-phy",
+		.owner	= THIS_MODULE,
+		.of_match_table	= hix5hd2_sata_phy_of_match,
+	}
+};
+module_platform_driver(hix5hd2_sata_phy_driver);
+
+MODULE_AUTHOR("Jiancheng Xue <xuejiancheng@...wei.com>");
+MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver");
+MODULE_ALIAS("platform:hix5hd2-sata-phy");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists