[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1406034695-15534-1-git-send-email-boris.brezillon@free-electrons.com>
Date: Tue, 22 Jul 2014 15:11:24 +0200
From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Andrew Victor <linux@...im.org.za>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org,
Thierry Reding <thierry.reding@...il.com>,
linux-pwm@...r.kernel.org, Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Rob Clark <robdclark@...il.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Bo Shen <voice.shen@...el.com>,
Boris BREZILLON <boris.brezillon@...e-electrons.com>
Subject: [PATCH v4 00/11] drm: add support for Atmel HLCDC Display Controller
Hello,
This patch series adds support for Atmel HLCDC (HLCD Controller) available
on some Atmel SoCs (i.e. the sama5d3 family).
The HLCDC actually provides a Display Controller and a PWM device, hence I
decided to declare an MFD device exposing 2 subdevices: a display
controller and a PWM chip.
This also solves a circular dependency issue preventing HLCDC driver from
unloading.
The HLCDC request a drm_panel device, which request a backlight device
(a PWM backlight), which depends on a PWM which is provided by the HLCDC
driver (hlcdc -> panel -> backlight -> hlcdc (pwm part)).
The current implementation only supports sama5d3 SoCs but other SoCs should
be easily ported by defining new compatible strings and adding HLCDC
description structures for these SoCs.
The drivers supports basic CRTC functionalities, several overlays and an
hardware cursor.
At the moment, it only supports connection to LCD panels through an RGB
connector (defined as an LVDS connector in my implementation), though
connection to other kind of devices (like DRM bridges) could be added later.
It also supports several RGB formats on all planes and some YUV formats on
the HEO overlay plane.
This series depends on 2 other series currently under review: [1] and [2].
Best Regards,
Boris
[1]http://lkml.iu.edu/hypermail/linux/kernel/1407.1/04171.html
[2]http://www.spinics.net/lists/kernel/msg1791681.html
Changes since v3:
- rework the layer code to simplify several parts (locking and layer
disabling)
- make use of the drm_flip_work infrastructure
- rely on default HW cursor implementation using on the cursor plane
- rework the display controller DT bindings (based on OF graph
representation)
- add rotation support
- retrive RGB bus format from drm_display_info
- drop the dynamic pinctrl state selection
- rework HLCDC output handling (previously specialized to interface
with LCD panels)
- drop ".module = THIS_MODULE" lines
- change display controller compatible string
Changes since v2:
- fix coding style issues (macro indentation)
- make use of GENMASK in several places
- declare regmap config as a static structure
- rework hlcdc plane update API
- rework cursor handling to make use of the new plane update API
- fix backporch config
- do not use devm_regmap_init_mmio_clk to avoid extra clk_enable
clk disable calls when accessing registers
- explicitely include regmap and clk headers instead of relying on
atmel-hlcdc.h inclusions
- make the atmel-hlcdc driver depends on CONFIG_OF
- separate DT bindings documentation from driver implementation
- support several pin muxing for HLCDC pins on sama5d3 SoCs
Changes since v1:
- replace the backlight driver by a PWM driver
- make use of drm_panel infrastructure
- split driver code in several subsystem: MFD, PWM and DRM
- add support for overlays
- add support for hardware cursor
Boris BREZILLON (11):
mfd: add atmel-hlcdc driver
mfd: add documentation for atmel-hlcdc DT bindings
pwm: add support for atmel-hlcdc-pwm device
pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
drm: add Atmel HLCDC Display Controller support
drm: add DT bindings documentation for atmel-hlcdc-dc driver
ARM: AT91/dt: split sama5d3 lcd pin definitions to match RGB mode
configs
ARM: AT91/dt: add alternative pin muxing for sama5d3 lcd pins
ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs
ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi
ARM: at91/dt: enable the LCD panel on sama5d3xek boards
.../devicetree/bindings/drm/atmel-hlcdc-dc.txt | 54 ++
.../devicetree/bindings/mfd/atmel-hlcdc.txt | 50 ++
.../devicetree/bindings/pwm/atmel-hlcdc-pwm.txt | 55 ++
arch/arm/boot/dts/sama5d31ek.dts | 20 +
arch/arm/boot/dts/sama5d33ek.dts | 20 +
arch/arm/boot/dts/sama5d34ek.dts | 20 +
arch/arm/boot/dts/sama5d36ek.dts | 20 +
arch/arm/boot/dts/sama5d3_lcd.dtsi | 205 +++++-
arch/arm/boot/dts/sama5d3xdm.dtsi | 58 ++
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel-hlcdc/Kconfig | 11 +
drivers/gpu/drm/atmel-hlcdc/Makefile | 7 +
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 286 ++++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 488 +++++++++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 224 ++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c | 635 ++++++++++++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h | 396 ++++++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 478 ++++++++++++
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 804 +++++++++++++++++++++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-hlcdc.c | 118 +++
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-atmel-hlcdc.c | 229 ++++++
include/linux/mfd/atmel-hlcdc.h | 78 ++
27 files changed, 4251 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
create mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
create mode 100644 drivers/gpu/drm/atmel-hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel-hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
create mode 100644 drivers/mfd/atmel-hlcdc.c
create mode 100644 drivers/pwm/pwm-atmel-hlcdc.c
create mode 100644 include/linux/mfd/atmel-hlcdc.h
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists