| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1405995074-3271-3-git-send-email-cw00.choi@samsung.com>
Date: Tue, 22 Jul 2014 11:11:14 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: jic23@...nel.org
Cc: ch.naveen@...sung.com, arnd@...db.de, kgene.kim@...sung.com,
kyungmin.park@...sung.com, t.figa@...sung.com,
linux-iio@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH 2/2] iio: adc: exynos_adc: Add support for S3C24xx ADC
This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
is alomost same as ADCv1. But, There are a little difference as following:
- ADCMUX register address to select channel
- ADCDAT mask (10bit or 12bit ADC resolution according to SoC version)
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 10 ++-
drivers/iio/adc/exynos_adc.c | 89 +++++++++++++++++++++-
2 files changed, 96 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index b6e3989..fe34c76 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -11,11 +11,19 @@ New driver handles the following
Required properties:
- compatible: Must be "samsung,exynos-adc-v1"
- for exynos4412/5250 controllers.
+ for exynos4412/5250 and s5pv210 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
+ Must be "samsung,s3c2410-adc" for
+ the ADC in s3c2410 and compatibles
+ Must be "samsung,s3c2416-adc" for
+ the ADC in s3c2416 and compatibles
+ Must be "samsung,s3c2440-adc" for
+ the ADC in s3c2440 and compatibles
+ Must be "samsung,s3c2443-adc" for
+ the ADC in s3c2443 and compatibles
Must be "samsung,s3c6410-adc" for
the ADC in s3c6410 and compatibles
- reg: Contains ADC register address range (base address and
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 05bdd2f12..7d28032 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -51,6 +51,9 @@
#define ADC_V1_MUX(x) ((x) + 0x1c)
#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
+/* S3C2410 ADC registers definitions */
+#define ADC_S3C2410_MUX(x) ((x) + 0x18)
+
/* Future ADC_V2 registers definitions */
#define ADC_V2_CON1(x) ((x) + 0x00)
#define ADC_V2_CON2(x) ((x) + 0x04)
@@ -67,6 +70,8 @@
/* Bit definitions for S3C2410 ADC */
#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) <<3)
+#define ADC_S3C2410_DATX_MASK 0x3FF
+#define ADC_S3C2416_CON_RES_SEL (1 << 3)
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
@@ -84,6 +89,7 @@
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
+#define ADC_CON_EN_START_MASK (0x3 << 0)
#define ADC_DATX_MASK 0xFFF
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
@@ -101,12 +107,14 @@ struct exynos_adc {
struct completion completion;
u32 value;
+ u32 value2;
unsigned int version;
};
struct exynos_adc_data {
int num_channels;
bool needs_sclk;
+ u32 mask;
void (*init_hw)(struct exynos_adc *info);
void (*exit_hw)(struct exynos_adc *info);
@@ -217,6 +225,17 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
static const struct exynos_adc_data const exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_v1_start_conv,
+};
+
+static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_S3C2410_DATX_MASK, /* 10bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
@@ -224,6 +243,55 @@ static const struct exynos_adc_data const exynos_adc_v1_data = {
.start_conv = exynos_adc_v1_start_conv,
};
+static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ /* Enable 12bit ADC resolution */
+ con1 = readl(ADC_V1_CON(info->regs));
+ con1 |= ADC_S3C2416_CON_RES_SEL;
+ writel(con1, ADC_V1_CON(info->regs));
+
+ /* Select channel for S3C2416 */
+ writel(addr, ADC_S3C2410_MUX(info->regs));
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2416_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_s3c2416_start_conv,
+};
+
+static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
+ unsigned long addr)
+{
+ u32 con1;
+
+ /* Select channel for S3C2433 */
+ writel(addr, ADC_S3C2410_MUX(info->regs));
+
+ con1 = readl(ADC_V1_CON(info->regs));
+ writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2443_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_S3C2410_DATX_MASK, /* 10bit ADC resolution */
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_s3c2443_start_conv,
+};
+
static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
unsigned long addr)
{
@@ -237,6 +305,7 @@ static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12bit ADC resolution */
.init_hw = exynos_adc_v1_init_hw,
.exit_hw = exynos_adc_v1_exit_hw,
@@ -293,6 +362,7 @@ static void exynos_adc_v2_start_conv(struct exynos_adc *info,
static const struct exynos_adc_data const exynos_adc_v2_data = {
.num_channels = MAX_ADC_V2_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12bit ADC resolution */
.init_hw = exynos_adc_v2_init_hw,
.exit_hw = exynos_adc_v2_exit_hw,
@@ -302,6 +372,7 @@ static const struct exynos_adc_data const exynos_adc_v2_data = {
static const struct exynos_adc_data const exynos3250_adc_data = {
.num_channels = MAX_EXYNOS3250_ADC_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12bit ADC resolution */
.needs_sclk = true,
.init_hw = exynos_adc_v2_init_hw,
@@ -312,6 +383,18 @@ static const struct exynos_adc_data const exynos3250_adc_data = {
static const struct of_device_id exynos_adc_match[] = {
{
+ .compatible = "samsung,s3c2410-adc",
+ .data = &exynos_adc_s3c24xx_data,
+ }, {
+ .compatible = "samsung,s3c2416-adc",
+ .data = &exynos_adc_s3c2416_data,
+ }, {
+ .compatible = "samsung,s3c2440-adc",
+ .data = &exynos_adc_s3c24xx_data,
+ }, {
+ .compatible = "samsung,s3c2443-adc",
+ .data = &exynos_adc_s3c2443_data,
+ }, {
.compatible = "samsung,s3c6410-adc",
.data = &exynos_adc_s3c64xx_data,
}, {
@@ -365,7 +448,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
ret = -ETIMEDOUT;
} else {
*val = info->value;
- *val2 = 0;
+ *val2 = info->value2;
ret = IIO_VAL_INT;
}
@@ -377,9 +460,11 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = (struct exynos_adc *)dev_id;
+ u32 mask = info->data->mask;
/* Read value */
- info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK;
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ info->value2 = readl(ADC_V1_DATY(info->regs)) & mask;
/* clear irq */
if (info->data->clear_irq)
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists