| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1406112847-26275-9-git-send-email-daniel.lezcano@linaro.org>
Date: Wed, 23 Jul 2014 12:53:51 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: linux-kernel@...r.kernel.org
Subject: [PATCH 09/25] clocksource: sh_tmu: Add DT support
From: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Document DT bindings and parse them in the TMU driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Tested-by: Simon Horman <horms+renesas@...ge.net.au>
---
.../devicetree/bindings/timer/renesas,tmu.txt | 39 +++++++++++++++
drivers/clocksource/sh_tmu.c | 51 ++++++++++++++++----
2 files changed, 80 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/renesas,tmu.txt
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
new file mode 100644
index 0000000..425d0c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+ - compatible: must contain "renesas,tmu"
+
+ - reg: base address and length of the registers block for the timer module.
+
+ - interrupts: interrupt-specifier for the timer, one per channel.
+
+ - clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+ - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+ - #renesas,channels: number of channels implemented by the timer, must be 2
+ or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+ tmu0: timer@...80000 {
+ compatible = "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+ };
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 560a31a..0f665b8 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -24,6 +24,7 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -509,23 +510,48 @@ static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
return 0;
}
+static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
+{
+ struct device_node *np = tmu->pdev->dev.of_node;
+
+ tmu->model = SH_TMU;
+ tmu->num_channels = 3;
+
+ of_property_read_u32(np, "#renesas,channels", &tmu->num_channels);
+
+ if (tmu->num_channels != 2 && tmu->num_channels != 3) {
+ dev_err(&tmu->pdev->dev, "invalid number of channels %u\n",
+ tmu->num_channels);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
{
- struct sh_timer_config *cfg = pdev->dev.platform_data;
- const struct platform_device_id *id = pdev->id_entry;
unsigned int i;
int ret;
- if (!cfg) {
- dev_err(&tmu->pdev->dev, "missing platform data\n");
- return -ENXIO;
- }
-
tmu->pdev = pdev;
- tmu->model = id->driver_data;
raw_spin_lock_init(&tmu->lock);
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ ret = sh_tmu_parse_dt(tmu);
+ if (ret < 0)
+ return ret;
+ } else if (pdev->dev.platform_data) {
+ const struct platform_device_id *id = pdev->id_entry;
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+
+ tmu->model = id->driver_data;
+ tmu->num_channels = hweight8(cfg->channels_mask);
+ } else {
+ dev_err(&tmu->pdev->dev, "missing platform data\n");
+ return -ENXIO;
+ }
+
/* Get hold of clock. */
tmu->clk = clk_get(&tmu->pdev->dev, "fck");
if (IS_ERR(tmu->clk)) {
@@ -545,8 +571,6 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
}
/* Allocate and setup the channels. */
- tmu->num_channels = hweight8(cfg->channels_mask);
-
tmu->channels = kzalloc(sizeof(*tmu->channels) * tmu->num_channels,
GFP_KERNEL);
if (tmu->channels == NULL) {
@@ -628,11 +652,18 @@ static const struct platform_device_id sh_tmu_id_table[] = {
};
MODULE_DEVICE_TABLE(platform, sh_tmu_id_table);
+static const struct of_device_id sh_tmu_of_table[] __maybe_unused = {
+ { .compatible = "renesas,tmu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sh_tmu_of_table);
+
static struct platform_driver sh_tmu_device_driver = {
.probe = sh_tmu_probe,
.remove = sh_tmu_remove,
.driver = {
.name = "sh_tmu",
+ .of_match_table = of_match_ptr(sh_tmu_of_table),
},
.id_table = sh_tmu_id_table,
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists