| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53D02064.2000207@kernel.org>
Date: Wed, 23 Jul 2014 21:51:48 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Josef Gajdusek <atx@...lax.net>, linux-iio@...r.kernel.org
CC: devel@...verdev.osuosl.org, gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org, pmeerw@...erw.net,
dan.carpenter@...cle.com, lars@...afoo.de
Subject: Re: [PATCH v5 (staging-next) 5/5] staging:iio:hmc5843: Add support
for spi hmc5983
On 22/07/14 16:03, Josef Gajdusek wrote:
> This patch adds support for the hmc5983 spi interface.
> This chip is almost identical to the hmc5883. The difference being added
> temperature compensation, additional available sample rate (220Hz) and an SPI
> interface.
>
> Signed-off-by: Josef Gajdusek <atx@....name>
Applied to the togreg branch of iio.git - initially pushed out as testing.
> ---
> drivers/staging/iio/magnetometer/Kconfig | 15 ++++
> drivers/staging/iio/magnetometer/Makefile | 1 +
> drivers/staging/iio/magnetometer/hmc5843_spi.c | 100 +++++++++++++++++++++++++
> 3 files changed, 116 insertions(+)
> create mode 100644 drivers/staging/iio/magnetometer/hmc5843_spi.c
>
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index c086f33..dec814a 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -22,4 +22,19 @@ config SENSORS_HMC5843_I2C
> - hmc5843_core (core functions)
> - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
>
> +config SENSORS_HMC5843_SPI
> + tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
> + depends on SPI_MASTER
> + select SENSORS_HMC5843
> + select REGMAP_SPI
> + help
> + Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
> + (digital compass).
> +
> + This driver can also be compiled as a set of modules.
> + If so, these modules will be created:
> + - hmc5843_core (core functions)
> + - hmc5843_spi (support for HMC5983)
> +
> +
> endmenu
> diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
> index 65baf1c..33761a1 100644
> --- a/drivers/staging/iio/magnetometer/Makefile
> +++ b/drivers/staging/iio/magnetometer/Makefile
> @@ -4,3 +4,4 @@
>
> obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o
> obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o
> +obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o
> diff --git a/drivers/staging/iio/magnetometer/hmc5843_spi.c b/drivers/staging/iio/magnetometer/hmc5843_spi.c
> new file mode 100644
> index 0000000..98c4b57
> --- /dev/null
> +++ b/drivers/staging/iio/magnetometer/hmc5843_spi.c
> @@ -0,0 +1,100 @@
> +/*
> + * SPI driver for hmc5983
> + *
> + * Copyright (C) Josef Gajdusek <atx@....name>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/iio/iio.h>
> +
> +#include "hmc5843.h"
> +
> +static const struct regmap_range hmc5843_readable_ranges[] = {
> + regmap_reg_range(0, HMC5843_ID_END),
> +};
> +
> +static struct regmap_access_table hmc5843_readable_table = {
> + .yes_ranges = hmc5843_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges),
> +};
> +
> +static const struct regmap_range hmc5843_writable_ranges[] = {
> + regmap_reg_range(0, HMC5843_MODE_REG),
> +};
> +
> +static struct regmap_access_table hmc5843_writable_table = {
> + .yes_ranges = hmc5843_writable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges),
> +};
> +
> +static const struct regmap_range hmc5843_volatile_ranges[] = {
> + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG),
> +};
> +
> +static struct regmap_access_table hmc5843_volatile_table = {
> + .yes_ranges = hmc5843_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges),
> +};
> +
> +static struct regmap_config hmc5843_spi_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .rd_table = &hmc5843_readable_table,
> + .wr_table = &hmc5843_writable_table,
> + .volatile_table = &hmc5843_volatile_table,
> +
> + /* Autoincrement address pointer */
> + .read_flag_mask = 0xc0,
> +
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int hmc5843_spi_probe(struct spi_device *spi)
> +{
> + int ret;
> +
> + spi->mode = SPI_MODE_3;
> + spi->max_speed_hz = 8000000;
> + spi->bits_per_word = 8;
> + ret = spi_setup(spi);
> + if (ret)
> + return ret;
> +
> + return hmc5843_common_probe(&spi->dev,
> + devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config),
> + HMC5983_ID);
> +}
> +
> +static int hmc5843_spi_remove(struct spi_device *spi)
> +{
> + return hmc5843_common_remove(&spi->dev);
> +}
> +
> +static const struct spi_device_id hmc5843_id[] = {
> + { "hmc5983", HMC5983_ID },
> + { }
> +};
> +
> +static struct spi_driver hmc5843_driver = {
> + .driver = {
> + .name = "hmc5843",
> + .pm = HMC5843_PM_OPS,
> + .owner = THIS_MODULE,
> + },
> + .id_table = hmc5843_id,
> + .probe = hmc5843_spi_probe,
> + .remove = hmc5843_spi_remove,
> +};
> +
> +module_spi_driver(hmc5843_driver);
> +
> +MODULE_AUTHOR("Josef Gajdusek <atx@....name>");
> +MODULE_DESCRIPTION("HMC5983 SPI driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists