linux-kernel - Re: [PATCH v1] gpio: keystone: add dsp gpio controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 24 Jul 2014 13:22:52 -0400
From:	Santosh Shilimkar <santosh.shilimkar@...com>
To:	Jassi Brar <jaswinder.singh@...aro.org>,
	Linus Walleij <linus.walleij@...aro.org>
CC:	Grygorii Strashko <grygorii.strashko@...com>,
	Suman Anna <s-anna@...com>,
	Alexander Shiyan <shc_work@...l.ru>,
	Alexandre Courbot <gnurou@...il.com>,
	"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
	<ivan.khoronzhuk@...com>,
	Muralidharan Karicheri <m-karicheri2@...com>,
	Rob Herring <robh+dt@...nel.org>,
	Kumar Gala <galak@...eaurora.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1] gpio: keystone: add dsp gpio controller driver

On Thursday 24 July 2014 01:19 PM, Jassi Brar wrote:
> On 23 July 2014 20:40, Linus Walleij <linus.walleij@...aro.org> wrote:
>> On Wed, Jul 16, 2014 at 12:43 PM, Grygorii Strashko
>> <grygorii.strashko@...com> wrote:
>>
>>> From: Murali Karicheri <m-karicheri2@...com>
>>>
>>> On Keystone SOCs, ARM host can send interrupts to DSP cores using the
>>> DSP GPIO controller IP. Each DSP GPIO controller provides 28 IRQ signals for
>>> each DSP core. This is one of the component used by the IPC mechanism used
>>> on Keystone SOCs.
>>>
>>> Keystone 2 DSP GPIO controller has specific features:
>>> - each GPIO can be configured only as output pin;
>>> - setting GPIO value to 1 causes IRQ generation on target DSP core;
>>> - reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
>>>   pending.
>>>
>>> Signed-off-by: Murali Karicheri <m-karicheri2@...com>
>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>>
>> Pardon me. How is this GENERAL PURPOSE Input/Output?
>>
>> It seems very very much SPECIAL PURPOSE to me, it's like
>> you're just shoehorning some IPC mechanism into the GPIO
>> subsystem, and this may be because the datasheet calls it
>> GPIO when it's not.
>>
>> What other stuff than DSP is connected to these lines, and is it
>> really even external lines? Aren't these just polysilicon rails
>> pretty much hammered to be used by the DSP and nothing else.
>>
>> What is the difference between this and a mailbox IRQ line
>> and the kind of stuff handled by drivers/mailbox?
>>
>> I'd like Suman and Jassi to have a look at this to see if it's
>> actually a mailbox before we proceed.
>>
> The controller seems like most others, only incapable of reading
> signals (output only).
>  The userspace driving those signals to communicate with a DSP isn't
> enough to call it a mailbox usecase, because on a different board the
> userspace may drive those signals to control LEDs :)
> 
Exactly !!
And that was my point. Thanks for echo.

Regards,
Santosh



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/