lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Jul 2014 13:05:05 +0530 From: Varka Bhadram <varkabhadram@...il.com> To: Nicolin Chen <nicoleotsuka@...il.com>, broonie@...nel.org CC: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com, ijc+devicetree@...lion.org.uk, galak@...eaurora.org, rdunlap@...radead.org, lgirdwood@...il.com, perex@...ex.cz, tiwai@...e.de, timur@...i.org, grant.likely@...aro.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, alsa-devel@...a-project.org, linuxppc-dev@...ts.ozlabs.org, shawn.guo@...aro.org, b02247@...escale.com, b42378@...escale.com, tklauser@...tanz.ch Subject: Re: [PATCH v4 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers On 07/25/2014 12:49 PM, Nicolin Chen wrote: (...) > + > + div[IN] = clk_get_rate(clk) / inrate; > + if (div[IN] == 0) { > + pair_err("failed to support input sample rate %dHz by asrck_%x", > + inrate, clk_index[ideal ? OUT : IN]); Ohhhhh... missed terminating new line... > + return -EINVAL; > + } > + > + clk = asrc_priv->asrck_clk[clk_index[OUT]]; > + > + /* Use fixed output rate for Ideal Ratio mode (INCLK_NONE) */ > + if (ideal) > + div[OUT] = clk_get_rate(clk) / IDEAL_RATIO_RATE; > + else > + div[OUT] = clk_get_rate(clk) / outrate; > + > + if (div[OUT] == 0) { > + pair_err("failed to support output sample rate %dHz by asrck_%x", > + outrate, clk_index[OUT]); same.. > + return -EINVAL; > + } > + > + (...) > +static int fsl_asrc_init(struct fsl_asrc *asrc_priv) > +{ > + /* Halt ASRC internal FP when input FIFO needs data for pair A, B, C */ > + regmap_write(asrc_priv->regmap, REG_ASRCTR, ASRCTR_ASRCEN); > + > + /* Disable interrupt by default */ > + regmap_write(asrc_priv->regmap, REG_ASRIER, 0x0); > + > + /* Apply recommended settings for parameters from Reference Manual */ > + regmap_write(asrc_priv->regmap, REG_ASRPM1, 0x7fffff); > + regmap_write(asrc_priv->regmap, REG_ASRPM2, 0x255555); > + regmap_write(asrc_priv->regmap, REG_ASRPM3, 0xff7280); > + regmap_write(asrc_priv->regmap, REG_ASRPM4, 0xff7280); > + regmap_write(asrc_priv->regmap, REG_ASRPM5, 0xff7280); > + > + /* Base address for task queue FIFO. Set to 0x7C */ > + regmap_update_bits(asrc_priv->regmap, REG_ASRTFR1, > + ASRTFR1_TF_BASE_MASK, ASRTFR1_TF_BASE(0xfc)); > + > + /* Set the processing clock for 76KHz to 133M */ > + regmap_write(asrc_priv->regmap, REG_ASR76K, 0x06D6); > + > + /* Set the processing clock for 56KHz to 133M */ > + regmap_write(asrc_priv->regmap, REG_ASR56K, 0x0947); No where we are checking the return value here, but return zero...? check the regmap_write return value then return or implement this to void... > + > + return 0; > +} > + > +/** > + * Interrupt handler for ASRC > + */ > + (...) > +static const struct platform_device_id fsl_asrc_devtype[] = { > + { > + .name = "imx35-asrc", > + .driver_data = IMX35_ASRC, > + }, { > + .name = "imx53-asrc", > + .driver_data = IMX53_ASRC, > + }, { > + /* sentinel */ > + } > +}; > +MODULE_DEVICE_TABLE(platform, fsl_asrc_devtype); > + where are you using fsl_asrc_devtype,,,? > +static const struct of_device_id fsl_asrc_ids[] = { > + { > + .compatible = "fsl,imx35-asrc", > + .data = &fsl_asrc_devtype[IMX35_ASRC], Ya here ... but what is the use...? > + }, { > + .compatible = "fsl,imx53-asrc", > + .data = &fsl_asrc_devtype[IMX53_ASRC], > + }, { > + /* sentinel */ > + } > +}; > +MODULE_DEVICE_TABLE(of, fsl_asrc_ids); > + (...) > + asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, > + "mem", regs, &fsl_asrc_regmap_config); devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs, &fsl_asrc_regmap_config); > + if (IS_ERR(asrc_priv->regmap)) { > + dev_err(&pdev->dev, "failed to init regmap\n"); > + return PTR_ERR(asrc_priv->regmap); > + } > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) { > + dev_err(&pdev->dev, "no irq for node %s\n", np->full_name); > + return irq; > + } > + > + ret = devm_request_irq(&pdev->dev, irq, fsl_asrc_isr, 0, > + asrc_priv->name, asrc_priv); same... Thanks... -- Regards, Varka Bhadram. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists