linux-kernel - Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140725083053.GD9532@piout.net>
Date:	Fri, 25 Jul 2014 10:30:54 +0200
From:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:	Jiří Prchal <jiri.prchal@...ignal.cz>
Cc:	Boris BREZILLON <boris.brezillon@...e-electrons.com>,
	devicetree@...r.kernel.org, nicolas.ferre@...el.com,
	linux-arm-kernel@...ts.infradead.org,
	Bo Shen <voice.shen@...el.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: at91: at91sam9x5: sets NPCS0 (PA14) back to GPIO

Hi,

On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
> I'm using custom board. My spi node:
> 			spi0: spi@...00000 {

You should override the pinctrl here as you are using gpios for the cs.
				pinctrl-0 = <&pinctrl_spi0_custom>;

> 				status = "okay";
> 				cs-gpios = <&pioA 23 0
> 					    &pioA 22 0
> 					    &pioC 29 0
> 					    &pioA 14 0>;
> 

		pinctrl@...ff400 {
				spi0 {
					 pinctrl_spi0_custom: spi0-custom {
							 atmel,pins =
									 <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
									 <AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
									 <AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
									 <AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					 };
				};
		};

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/